Amadas ADSL-0101T Bedienungsanleitung
Smart Door Lock
Operation Manual
The illustrations may look different from the real product.
If you have any questions, please contact us at +82 2 1522 4802
www.amadas.kr
CONTENTS
Precautions 03
Safety Features 17
Tubular Type
Product Specifications 04
Component Information 05
Name of Each Part 06
How to Install the Product 07
How to Remove and Reinstall the Product 08
Mortise Type
Product Specifications 09
Component Information 10
Name of Each Part 11
How to Install the Product 12
How to Remove and Reinstall the Product 13
Customer Support
Checklist for product abnormalities 18
Summary of usage 19
AMADAS model code 20
Product warranty 21
How to Use the Product
Button functions 14
Registering and changing access codes 14
Setting up 15
Gaining access 16
Emergency power supply method 16
Battery replacement method 16
Precautions
This manual is a guide for proper installation and use intended to prevent
your inconvenience and damage. Please read it carefully for proper usage.
※ We are not responsible for damage to the product or injury to people due to customer negligence.
※ After installation, please change your access code.
Do not spary water directly or use chemicals to clean the product.
There is a danger of electric shock of fire.
Please install the product after reading the manual.
Do not disassemble the product as disassembly may cause deformation
and breakage.
When you go out, check whether the door is locked by operating the lever.
The default setting for the Access Code is 1234.
Be careful not to expose your access code to others,
and change it regularly.
The number input part is a touch sensor operated by the push dual method,
so do not overly push with force.
Be careful not to bump into the handle, and be careful not to let your
children hang on the product.
When th batteries have reached the end of their life, replace all batteries
at the same time and do not mix unused batteries with used ones.
If the battery replacement alarm rings, replace the with new ones.
When th battery is discharged, you can charge it by using the flashlight of
your mobile phone.
03AMADAS Operation Manual
Classification Contents
Product Name and
Model Name Smart Door Lock / ADSL-0101T
Rated Voltage and Power DC 3V (1.5V X 2 - AA Alkaline LR06)
Installation Hole(Size) 45~80mm
Door Thickness 30~80mm
Product Exterior Material Stainless Steel & Pipe
Battery Life About 9000 hours (When using an average of 10 times a day)
However, the battery life may vary depending on the battery type.
04AMADAS Operation Manual
Tubular Type
175.7
Ø89.0
18.5
72.50
5.9
Size
(Units : mm)
Outer Lever Module Inner Lever Module Tubular Assembly
Door Frame Trim Set
2 AA Size Batteries+ Driver / - Driver
Tubular, Door Trim Screw /
Module Bolts and Joint Bolts (L size)
Smart Door Lock
Operation Manual
The illustrations may look different from the real product.
If you have any questions, please contact us at +82 2 1522 4802
www.amadas.kr
The illustrations may look different from the real product.
Images from your mobile phone screen may vary depending on
the operating system (OS) you are using.
If you have any questions, please contact us at +82 2 1522 4802
Quick User Guide
ADSL-0101
QUICK GUIDE
www.amadas.kr
1 Operation Manual /
1 Quick User Guide
Option
Physical Key / Master Key
Component Information
05AMADAS Operation Manual
Outer Lever
Module
06AMADAS Operation Manual
10.0
Latch
8
Dead Bolt
Name of Each Part
70mm Setting65mm Setting
45 degree Spin
and Zoom
Latch
&
Dead
Bolt
Fastening
Hole
Zoom Cylinder
(60, 65, 70
3-stage Adjustment)
14.
Tubular
Assembly
Battery Cap
Battery Case
Body
Packing
Fastening
bolt
Inner Lever
Module
Emergency
Charging
Part
Joint Bolt
Body
Packing
Installing the Product
07AMADAS Operation Manual
Installing the Tubular
- Insert the inclined face of the latch/dead bolt to the tubular
door in the closing direction of door.
- Fasten the screw.
Installing the Outer Lever Module
- Insert the outer lever module joint bolt into the tubular
tightening hole and fasten it to the door.
Installing Inner Lever Module
(Insert the batteries after completing installation)
- After inserting the inner lever module, tighten the two fastening
bolts clockwise onto the outer lever module joint bolt using a
screwdriver, for the left and right side, respectively.
Checking Lever Operation (after installation is complete)
- Move the lever down in the direction of usage
(left or right),
then it automatically gets fixed.
- Operate the lever down to check that the latch works properly.
- Insert the batteries into the lever.
(Refer to page 16 of the Operation Manual)
- Refer to page 14 of the Operation Manual to complete the
registration process.
Installing the Door Trim and Adjusting the Door Shake
- Install the door trim.
- Adjust the door shake by adjusting the inner pocket after
installing the door trim.
*Be sure to set the power terminal(Arrow Section) horizontally
before installing.
Installation Method
- The physical key must be removed completely before installing the lock.
(Applied model : ADSL-0101TK/ADSL-0101MK)
- Please refer to the installation video on the website (www.amadas.kr).
- After completing the registration procedure, make sure that rhe door opens and closes
using the access code, then close the door.
- Register an access code after installation or a factory reset. After registering, the initial
access code will be deleted. Please note that if the key is used unregistered, others may
access the system by using the initial access code.
Disassembling the Product
Reinstalling the Product
Preparing for Disassembly
- Leave the door open.
- Remove the batteries from the product.
- Pull the inner levers and outer levers towards yourself
as shown in the diagram.
Disassembly
- Remove the two fastening bolts and separates the inner
lever module.
- Separate the outer lever module.
- Remove the tubular after releasing the bolt.
Setting lever direction
- Set direction of the lever in neutral to the left lock or
right lock gate.
08
AMADAS Operation Manual
How to Remove and Reinstall the Product
- Please refer to this manual for removal and reinstallation
- The physical key must be removed completely before relocating pre-installated
lock.
(Applied model : ADSL-0101TK/ADSL-0101MK)
2
1
3
2
1
3
Caution) When installing in a different location, make sure to
go to settings mode and reset the PIN.
09AMADAS Operation Manual
Mortise Type
Classification Contents
Product Name and
Model Name Smart Door Lock / ADSL-0101M
Rated Voltage and Power DC 3V (1.5V X 2 - AA Alkaline LR06)
Installation Hole(Size) 45~80mm
Door Thickness 30~80mm
Product Exterior Material Stainless Steel & Pipe
Battery Life About 9000 hours (When using an average of 10 times a day)
However, the battery life may vary depending on the battery type.
175.7
Ø89.0
18.5
72.50
5.9
Size
(Units : mm)
Outer Lever Module Inner Lever Module Mortise Assembly
Door Frame Trim Set
2 AA Size Batteries+ Driver / - Driver
Mortise, Door Trim Screw /
Module Bolts and Joint Bolts (L size)
The illustrations may look different from the real product.
Images from your mobile phone screen may vary depending on
the operating system (OS) you are using.
If you have any questions, please contact us at +82 2 1522 4802
Quick User Guide
ADSL-0101
QUICK GUIDE
www.amadas.kr
Smart Door Lock
Operation Manual
The illustrations may look different from the real product.
If you have any questions, please contact us at +82 2 1522 4802
www.amadas.kr
1 Operation Manual /
1 Quick User Guide
Option
Physical Key / Master Key
Component Information
10AMADAS Operation Manual
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Amadas Türschloss Handbücher
