Ambient Weather WS-01T Bedienungsanleitung

Ambient Weather WS-01T Color Changing Wireless

Temperature Night Light with Ambient Backlight User

Manual

Table of Contents

1Introduction...............................................................................................................................2

2Getting Started ..........................................................................................................................2

2.1 Parts List...........................................................................................................................2

2.2 Recommend Tools............................................................................................................2

2.3 Thermometer Sensor Set Up ............................................................................................3

2.4 Night Light Power Up......................................................................................................5

2.5 Battery Replacement ........................................................................................................6

2.6 Display Console Layout...................................................................................................7

3Night Light Operation...............................................................................................................8

3.1 Quick Display Mode ........................................................................................................8

3.2 Set (Program) Mode.........................................................................................................8

3.4 Sensor Search Mode.......................................................................................................12

3.5 Best Practices for Wireless Communication ..................................................................12

3.6 Min/Max Mode ..............................................................................................................13

3.7 Manually Turn the Backlight On and Off.......................................................................13

3.8 Adjustment or Calibration..............................................................................................14

3.9 Temperature Calibration.................................................................................................14

4Personalizing Color Ranges....................................................................................................14

5Glossary of Terms ...................................................................................................................15

6Specifications..........................................................................................................................15

6.1 Wireless Specifications ..................................................................................................15

6.2 Measurement Specifications...........................................................................................15

6.3 Power..............................................................................................................................15

7Troubleshooting Guide............................................................................................................16

8Liability Disclaimer ................................................................................................................17

9FCC Statement........................................................................................................................17

10 Warranty Information .........................................................................................................18

1Introduction

Thank you for your purchase of the Ambient Weather WS-01T Color Changing Wireless

Temperature Night Light with Ambient Backlight. The following user guide provides step by step

instructions for installation, operation and troubleshooting. To download the latest manual and

additional troubleshooting tips, please visit:

http://ambientweather.wikispaces.com/ws01t

2Getting Started

Note: The power up sequence must be performed in the order shown in this section (insert

batteries in the remote transmitter(s) first, power up the night light second).

The unit consists of a display console (receiver), and a thermometer (remote transmitter).

2.1 Parts List

Night Light

Frame Dimensions (LxHxW): 2.6 x 2.3 x 2.4 in

LCD Dimensions (LxW): 1.9 x 1.9 in

Thermometer transmitter (FT007T)

Dimensions (LxHxW): 4.5 x 2.0 x 0.75in

CR2032 Battery

Manual

2.2 Recommend Tools

Hammer and nail for hanging remote thermometer transmitter.

2.3 Thermometer Sensor Set Up

1. Remove the battery door on the back of the sensor by removing the set screw, as shown in

Figure 1.

Figure 1

2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of

the transmitter.

Figure 2 displays all four switches in the OFF position (factory default setting).

Figure 2

3. Channel Number: The WS-01T supports up to eight transmitters. To set each channel

number (the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table

4. Temperature Units of Measure: To change the transmitter display units of measure (°F

vs. °C), change Dip Switch 4, as referenced in Table 1.

DIPSWITCH

FUNCTION

DOWN

---

Channel 1

DOWN

---

Channel 2

DOWN

---

Channel 3

DOWN

---

Channel 4

DOWN

---

Channel 5

DOWN

---

Channel 6

DOWN

---

Channel 7

---

Channel 8

---

DOWN

°F

---

°C

Table 1

5. Insert two AAA batteries.

6. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and

then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting

data.

7. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are

on the display, as shown in Figure 3.

Figure 3

(1) temperature

(2) temperature units (°F vs. °C)

(3) channel number

8. Close the battery door. Make sure the gasket (around the battery compartment) is properly

seated in its trace prior to closing the door. Tighten the set screw.

2.4 Night Light Power Up

1. Move the remote thermometer(s) about 5 to 10’ away from the night light (if the sensor is

too close, it may not be received by the night light). If you have more than one transmitter,

make sure they are all powered up and transmitting on different channels.

2. Plug the night light into the wall outlet. Watch for the backlight to change colors. Indoor

Temperature will be displayed afterAC ON is displayed temporarily in the time field.

3. Release the Pull Tab to energize the back-up battery, as shown in Figure 4.

4. The console will instantly display indoor temperature. The remote temperature will

update on the display within a few minutes on the appropriate channel.

While in the search mode, the remote search icon will be constantly displayed.

If you have more than once remote sensor (up to eight remotes are supported), the display

will automatically toggle between sensors until all sensors have reported in.

Do not touch any buttons until the remote sensor has reported in, or the radio search

icon is no longer on, otherwise the remote sensor search mode will be terminated.

When the remote sensor temperature has been received, the console will automatically

switch to the normal mode, and all further settings can be performed.

Figure 4

2.5 Battery Replacement

To replace the battery, push the battery release tab with one finger and pull the battery holder with

a second finger, as shown in Figure 5 A and B.

Inset the new battery (+ terminal up, as shown in Figure 5 C). Push the battery holder into the

night light.

Figure 5

2.6 Display Console Layout

Note: The following illustration shows the full segment LCD display for description purposes

only and will not appear like this during normal operation.

1. Indoor temperature icon

2. Outdoor temperature icon (CH 1-8)

3. Min/Max reset (clears daily)

4. Temperature units (°F or °C)

5. Temperature display

6. Time alarm icon

7. Time display

8. TIM icon (backlight timer option)

9. CNT icon (backlight control option)

10. Transmitter Low power indicator

11. Scroll mode (CH 1-8)

Figure 6

3Night Light Operation

Note: The night light has three keys for easy operation: SET key, CH/+key and

MIN/MAX/-key.

3.1 Quick Display Mode

While in Normal Mode, press (do not hold) the SET key to enter the Quick Display Mode as

follows:

•Once for time/week

•Twice for date.

•Three times for time alarm

•Four times for time/second

3.2 Set (Program) Mode

While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set

Mode. The first setting will begin flashing. You can press the SET key again to skip any step, as

defined below.

Note: In the Set mode, press the [CH/+] key or [MINMAX/-] key to change or scroll the

value. Hold the [CH/+] key or [MINMAX/-] key for three seconds to increase/decrease rapidly.

Note: In Set mode, to enter the normal mode, complete all set mode operations or wait 30

seconds for timeout.

1. 12/24 Hour Format (default: 12h):. Press the [CH/+] key to change between 12 hour and 24

hour format.

2. Change Hour. Press the SET key again to set the hour. Press the [CH/+] key or

[MINMAX/-] key to adjust the hour up or down. Note the PM icon is present during

afternoon hours.

3. Change Minute. Press the SET key again to set the minute. Press the [CH/+] key or

[MINMAX/-] key to adjust the minute up or down.

4. Date Format (default: MM-DD): Press the SET key again to enter the day/month format

mode. Press the [CH/+] key to switch between DD-MM-YY and MM-DD-YY.

5. Change Month. Press the SET key again to set the calendar month. Press the [CH/+] key or

[MINMAX/-] key to adjust the calendar month.

6. Change Day. Press the SET key again to set the calendar day. Press the [CH/+] key or

[MINMAX/-] key to adjust the calendar day.

7. Change Year. Press the SET key again to set the calendar year. Press the [CH/+] key or

[MINMAX/-] key to adjust the calendar year.

8. Time Alarm Hour. Press the SET key again to set time alarm hour. Press the [CH/+] key or

[MINMAX/-] key to adjust the hour up or down. While the alarm value is flashing, press and

hold the SET button for three seconds to turn the alarm on and off. The time alarm icon will

appear when set, and disappear when disabled. Press (do not hold) the SET key to

advance to the next setting.

9. Time Alarm Minute. Press the SET key again to set time alarm minute. Press the [CH/+] key

or [MINMAX/-] key to adjust the minute up or down. While the alarm value is flashing, press

and hold the SET button for three seconds to turn the alarm on and off. The time alarm icon

will appear when set, and disappear when disabled. Press (do not hold) the SET key to

advance to the next setting.

10. Temperature Units of Measure (default: °F):. Press the SET key again to change the

temperature units of measure (the UNITSET icon will be displayed). Press the [CH/+] key to

switch between °F and °C units of measure.

11. Max/Min Clearing. Press the SET key again to set the max/min clearing mode (CLR

ON/OFF). The Max/Min can be programmed to clear daily (at midnight) or manually. Press

the [CH/+] key to switch between “Clears Daily”and Clears Manually.

12. Backlight Color Setting (default: Outdoor or CH1). Press the SET key again to set the

backlight color defined parameter (the LED icon will be displayed). Press [CH/+] key or

[MINMAX/+] key to toggle between OUT (uses the channel 1 temperature to automatically

display backlight color), IN (uses the indoor temperature to automatically display backlight

color) or USE (manually set your own backlight color to one of 11 choices).

The following section is based on the OUT, IN or USE setting selected.

12.1 OUT Backlight Color Setting (reference Figure 7).

12.2 Outdoor Backlight Color Low (OUT default: 10): Press the SET key again to

change the lower range of the color changing backlight spectrum (the LOWER icon will

be displayed). Press the [CH/+] key or [MINMAX/+] key to adjust the low temperature

limit.

12.3 Indoor Backlight Color High (default: 100): Press the SET key again to change

the upper range of the color changing backlight spectrum (the UPPER icon will be

displayed).

12.4 IN Backlight Color Setting (reference Figure 7).

12.5 Indoor Backlight Color Low (IN default: 58): Press the SET key again to change

the lower range of the color changing backlight spectrum (the LOWER icon will be

displayed). Press the [CH/+] key or [MINMAX/+] key to adjust the low temperature

limit.

12.6 Indoor Backlight Color High (default: 85): Press the SET key again to change the

upper range of the color changing backlight spectrum (the UPPER icon will be

displayed).

12.7 USE Backlight Color Setting (reference Figure 7).

12.8 Backlight Color (USE): Press the SET key again to manually select the backlight

color (the COLOR icon will be displayed). Press [CH/+] key or [MINMAX/+] key to

choose among 11 different colors.

Inhaltsverzeichnis

Andere Ambient Weather Wetterstation Handbücher

Ambient Weather

Ambient Weather WH2F Bedienungsanleitung

Ambient Weather

Ambient Weather WS-L3303THB Bedienungsanleitung

Ambient Weather

Ambient Weather EZ-HD-PTP-100 Bedienungsanleitung

Ambient Weather

Ambient Weather OBSERVER WS-1002-ARRAY Bedienungsanleitung

Ambient Weather

Ambient Weather WS-0800-IP ObserverBase Bedienungsanleitung

Ambient Weather

Ambient Weather DHR70B-STAINLESS Bedienungsanleitung

Ambient Weather

Ambient Weather WS-2090 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-0100 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-2902B Bedienungsanleitung

Ambient Weather

Ambient Weather GL164-M Bedienungsanleitung

Ambient Weather

Ambient Weather Weather Mount Bedienungsanleitung

Ambient Weather

Ambient Weather WEATHER WINDOW Bedienungsanleitung

Ambient Weather

Ambient Weather Fischer BAROMETER-26 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-7078 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-1400-IP OBSERVER Bedienungsanleitung

Ambient Weather

Ambient Weather WeatherHub2 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-1500-IP Bedienungsanleitung

Ambient Weather

Ambient Weather WS-50-C Bedienungsanleitung

Ambient Weather

Ambient Weather WS-5000 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-YG710S-Y Bedienungsanleitung

Ambient Weather

Ambient Weather WS-1171 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-1172 Bedienungsanleitung

Ambient Weather

Ambient Weather WS-MOF0831-CTH Bedienungsanleitung

Ambient Weather

Ambient Weather WS-1900A Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung