American DJ Fusion Scan 250 Bedienungsanleitung

User Instructions

American DJ

4295 Charter Street

Los Angeles, CA 90058

www.americandj.com

Fusion Scan 250™ Introduction

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 2

Introduction: Congratulations and thank you for purchasing the Fusion

Scan 250™ by American DJ®, one of the finest pieces of its kind on the

market today! The Fusion Scan 250™ is a excellent, light weight, intel-

ligent fixture. Due to it’s physical specifications, it’s a great piece for

mobile DJ’s, roller rinks, small clubs, bars, and bowling centers. When

used in multiples of two or more, these units create an effect that rivals

that of units that can cost up to three times the price. The Fusion Scan

250™ was designed to run in a Master/Slave mode but can be used

with any universal DMX-512 controller.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set-up and installation help and to answer any

question should you encounter problems during your set up or initial

operation. You may also visit us on the web at www.americandj.com

for any comments or suggestions. Toll free customer service hours are

Monday through Friday 9:00 a.m. to 5:30 p.m. Paciﬁc Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or ﬁre, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ® customer support.

Please recycle the shipping carton when ever possible.

Improvements and changes in speciﬁcations and design to this

manual and unit may be made at any time without prior notice.

HALOGEN LAMP WARNING!

This fixture is fitted with a halogen lamp which is highly susceptible to

damage if improperly handled. Never touch the lamp with your bare

fingers as the oil from your hands will shorten the lamp life. Never

install, mount, or place this fixture in areas prone to heavy vibration.

Also, never move the fixture until the lamp has had ample time to

cool. Remember, lamps are not covered under warranty conditions.

12/05

American DJ®

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 4©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 3

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Please route your power cord out of the way of

foot trafﬁc.

• Do not attempt to remove or break off the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and ﬁre in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the top cover under any conditions. There are no

user serviceable parts inside.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged in any

way.

• Never operate this unit when it’s cover is removed.

• To reduce the risk of electrical shock or ﬁre, do not expose this unit

rain or moisture

• This unit is intended for indoor use only, use of this product out

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power Cord Protection - Power cords should be routed so they are

not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs, conve-

nience receptacles, and the point where they exit from the unit.

• Cleaning - Follow the directions on page 10.

• Heat -The unit should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

Fusion Scan 250™ Safety Precautions Fusion Scan 250™ Safety Precautions

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a

marked change in performance.

The Fusion Scan 250™ features a bright 250 watt halogen bulb with

a separate gobo and color wheel and a green laser effect. The color

wheel features seven brilliant colors plus white and the gobo wheel

features 10 gobos plus a large spot. This fixture incorporates the

use of high quality stepper motors for a more accurate mirror move-

ment. Mirror movement allows for a full 90 degree tilt (vertical) and a

45 degree pan (horizontal). An internal built in microphone allows the

fixtures to run in Stand Alone mode so there is no need for an exter-

nal controller. The Fusion Scan 250™ may also be set-up to run in a

Master-Slave mode when used in multiples, up to four units. When

used in the Master-Slave mode, the unit will chase to several internal

programs. The Fusion Scan 250™ can also be controlled via a stan-

dard DMX controller such as the Elation® Show Designer,™ or the

Elation® DMX Operator,™ giving the user independent control over the

gobo and color wheel as well as the mirrors pan and tilt movements.

Note: The built in programs in the Fusion Scan 250™ are so good you

may never need a DMX controller.

• ZB-ELC10 24V/250W

• DMX-512 Compatible.

• Stepper motors for smooth movements.

• 7 colors plus white.

• 10 Gobos plus spot.

• Green Laser

• Gobo Shake

• Master/Slave Operation

• Sound Active.

• Optional MINI/C controller, for blackout control.

• Optional Wireless MINI/C controller, for blackout control.

Fusion Scan 250™ Features

Fusion Scan 250™ Laser Warninig Labels

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 5 ©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 6

Fusion Scan 250™ Set Up

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ®

Fusion Scan 250.™ The American DJ® Fusion Scan 250™ is available

in a 120v and 220v version. Because line voltage may vary from venue

to venue, you should be sure your unit voltage matches the wall outlet

voltage before attempting to operate you ﬁxture. Also be sure the power

cable matches the voltage and current requirements of the unit.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

different manufactures to be linked together and operate from a single

controller, as long as all ﬁxtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of

1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The Fusion Scan 250™ can be con-

trolled via DMX-512 protocol. The Fusion Scan

250™ is a ﬁve channel DMX unit. The DMX address

is set using the dipswitches on the front panel of

the unit. Your unit and your DMX controller require

a standard 3-pin XLR connector for data input and

data output (Figure 1). If you are making your own

cables, be sure to use standard two Figure 1

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 5

Fusion Scan 250™ Set Up

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 6

conductor shielded cable (This cable may be purchased at almost all

professional sound and lighting stores). Your cables should be made

with a male and female XLR connector on either end of the cable. Also

remember that DMX cable must be daisy chained and cannot be split.

Notice: Be sure to follow ﬁgures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conﬁguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 4

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin XLR

connectors for DATA transmission in place of 3-pin. 5-pin XLR ﬁxtures

may be implemented in a 3-pin XLR DMX line. When inserting standard

5-pin XLR connectors in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Pin 5 - Do Not Use

Pin 4 - Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Fantasy Scan 250™ Set Up

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 8©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 7

Fusion Scan 250™ Operating Instructions

Operating Modes:

You can use the Fusion Scan 250™ in three ways:

• Stand alone mode - The unit will react to sound, chasing through

the several built in programs. You can also use the optional DJ Scan

MINI/C Remote Control to blackout the units.

• Master/Slave mode - You can daisy chain up to 16 units together

to get a synchronized light show that will react to sound chasing

through several built in programs.

• DMX control mode - This function will allow you to control each

individual fixtures traits with a standard DMX 512 controller such as

the Elation® Show Designer.™

For best results use fog or special effects smoke to enhance the

beams projections. The Fusion Scan 250™ comes with a protective

transportation cover. Be sure to remove it before attempting any

operation!

Stand Alone, Sound Active Mode:

1. To operate as a stand alone, sound active unit, set dipswitch #10

into the ‘On” position.

2. Adjust the sensitivity knob on the bottom of the unit so the unit

will react to sound.

3. The Fusion Scan 250™ will now react to the bass sound of music

via the internal microphone.

Master-Slave Operation (Sound Active):

This function will allow you to link units together to run a master/slave

configuration. The units will be sound activated. In Master-Slave oper-

ation one unit will act as the controlling unit and the others will react

to the controlling units programs. Any unit can act as a Master or as a

Slave.

1. Daisy chain your units via the XLR connector on the bottom

of the units.

2. Use standard XLR microphone cables to link your units together.

Remember that the Male XLR connector is the input and the

Female XLR connector is the output.

3. The first unit in the chain (master) will use the female XLR connec-

tor only - The last unit in the chain will use the male XLR connec

tor only.

4. Please follow chart on page 13 for dipswitch settings, or to run a

synchronized light show set all the dipswitches on the slave fix-

tures to the ‘off’ position, and on the master unit set dipswitch

#10 to the “on” postion. All fixtures will now run in the same exact

pattern.

Note: Only one fixture may use the master units dipswitch settings.

5. After all the units settings have been set and are plugged in,

adjust the sensitivity knob on the bottom of the master unit to

make them react to sound.

7. You can also use the optional MINI/C Remote Control. If you want

to use the optional remote control, connect the MINI/C controller

to the first fixture in the line (master).

Note: The remote control only operates in Stand-Alone and Master/

Slave modes. If the remote is connected in DMX mode it will not func-

tion. If the units do not receive an active DMX signal, the units will

automatically react to sound in the Master/Slave mode.

DMX Mode:

This fixture will react with DMX operation. For best results use only

one motor function for each scene (or step), when programming

scenes into a DMX controller. This will give you faster mirror and fast-

er gobo/color changes. For Example:

A. With the DMX controller move the mirror up then program the

step.

B. Move the mirror down then program that step.

C. Change the gobo/color wheel then program that step.

D. Continue this pattern to achieve best results.

1. Operating through a DMX controller gives the user freedom to

create his/her own programs tailored to their own individual

needs. This function also allows you to use your fixtures as spots.

2. This operation will allow you to control each individual fixtures

traits with a standard DMX 512 controller such as the Elation®

Show Designer™ or the Elation® DMX Operator.™

3. The Fusion Scan 250™ uses five DMX channels to operate;

Channel 1 is Pan, channel 2 is Tilt, channel 3 is Color, channel 4

Gobos, and channel 5 controls the Green Laser.

4. To run your fixture in DMX mode, plug in the fixture via the XLR

connections to any standard DMX controller. Set dipswitch #1 to

the on position - Follow the set-up specifications that come with

the controller.

Fusion Scan 250™ Operating Instructions

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 10©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 9

Fusion Scan 250™ Lamp Replacement

Lamp Replacement: Caution! Never open the unit when in use.

Always disconnect the main power before attempting to replace the

lamp.

1. Be sure to follow the proper procedures when handling halogen

bulbs.

2. Lamp replacement has been made simple by incorporating the use

of a removable lamp tray and thumb screws.

3. Loosen the thumb screw on rear cover.

4. Remove the tray.

5. Remove and replace the bulb.

6. Reassemble.

Remember to always replace with the exact same type lamp and

fuse, unless otherwise specified by an authorized American DJ

service technician.

Fusion Scan 250™ Focusing

1. To focus a Fusion Scan 250,™ it is best to first turn down the

music sensitivity knob to its minimum position.

2. Loosen the thumb screw on the front of the unit that hold the lens

in place.

3. Adjust the focus by manually moving the lens up and down.

4. Tighten the thumb screw after you achieve your desired focus.

The Fusion Scan 250™ carries a one year (365 days) limited warranty.

We recommend you fill out the enclosed warranty card to validate

your purchase. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) number. If the unit is under warranty, you must provide a copy

of your proof of purchase invoice. Please contact American DJ® cus-

tomer support for a R.A. number.

Fusion Scan 250™ Product Registration

The Fusion Scan 250™ may be controlled by a wide range of control-

lers; ie. Show Designer™, DMX Operator,™ Scene Setter™ or by the

DJ MINI/C basic controller.

MINI/C features:

Fusion Scan 250™ Optional Remote

The MINI/C controller may be purchased separately allowing you to

control the main unit, and any others connected to it, while it is in

stand alone mode. You can set the unit to blackout. If you have more

than one unit, make sure the remote control is plugged into the first

unit in the daisy chain. The remote control will not have any effect if

the unit is in DMX mode. When the unit is in blackout mode, the light

will come on next to the blackout button.

30 ft. cable

Stand by (Black out)

Listed below are a few common problems the user may encounter,

with solutions.

No light from the unit;

1. Check the breaker in the back panel.

2. Check if lamp is lit. The user should be able to see some light

escape through the fan. If power is present but the lamp is not lit,

lamp may need to be replaced.

Note: The unit has been designed to shut the lamp down after 60 sec-

onds of inactivity. This is a way of extending lamp life, be assured this

is not the problem with the fixture.

Unit not responding to DMX;

1. Check the dipswitch settings.

2. Check that all cables are connected to the right connectors; it

does matter which way the inputs and outputs are connected.

3. If it is a bad connection, the Green LED may flash when cables are

wiggled (but remember it may also be the unit sensing audio!)

4. If DMX connectors are fairly short, ordinary microphone cables

may be used. For longer runs, this may cause data transmission

problems (which will show up as random or incorrect movements)

for best result, use proper balanced data transmission cable.

Unit does not respond to sound;

1. Be sure the audio sensitivity knob is turn in the full clockwise

position (maximum sensitivity).

Unit blacks out in stand alone mode;

1. Some of the units’ built-in patterns include special effects such

as blackout sweeps.

2. Be sure the audio sensitivity knob is turn in the full clockwise

position (maximum sensitivity).

If problems are not resolved; Contact your American DJ® customer

support for possible service options.

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 12©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 11

Fusion Scan 250™ Trouble Shooting

Due to fog residue, smoke, and dust, cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light

output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing.

2. Use a brush to wipe down the fan grill.

3. Clean the external optics with glass cleaner and a soft cloth every

20 days. Situation may very. If used heavily in clubs with lots of

fog, cleaning may be required more often.

4. Clean the internal optics with glass cleaner and a soft cloth every

30-60 days.

5. Always be sure to dry all parts completely before plugging the

unit in.

Cleaning frequency depends on the environment in which the fixture

operates (i.e. smoke, fog residue, dust, dew).

Fusion Scan 250™ Cleaning

Emerald Scan™ Breaker Reset

This unit is equipped with a built-in safety breaker. This breaker is

designed to close the power circuit in the event of an internal short

or power surge. This will reduce the risk of electrical shock or ﬁre and

protect the circuitry. To reset the breaker, push the breaker button in

until you hear it “pop” back in to place. If the breaker continues to

pop, stop using the unit and contact our customer support team, the

unit may need to be returned for service.

Fusion Scan 250™ Master/Slave Settings

©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 14©American DJ Supply® - www.americandj.com - Fusion Scan 250™ User Manual Page 13

The following details the proper dipswitch setting for Master-Slave

conﬁguration.

Fusion Scan 250™ Gobo Layout

Fusion Scan 250™ DMX Traits

Channel Value Function

1 0 - 255 PAN

2 0 - 255 TILT

3 COLORS

0 - 28 LAMP OFF

29 - 57 WHITE

58 - 86 RED

87 - 115 BLUE

116 - 144 GREEN

145 - 173 YELLOW

174 - 202 ORANGE

203 - 231 PINK

232 - 255 PURPLE

4 GOBO

0 - 7 SPOT

8 - 21 SPOT SHAKE

22 - 29 GOBO 1

30 - 43 GOBO 1 SHAKE

44 - 51 GOBO 2

52 - 65 GOBO 2 SHAKE

66 - 73 GOBO 3

74 - 87 GOBO 3 SHAKE

88 - 95 GOBO 4

96 - 109 GOBO 4 SHAKE

110 - 117 GOBO 5

118 - 131 GOBO 5 SHAKE

132 - 139 GOBO 6

140 - 153 GOBO 6 SHAKE

154 - 161 GOBO 7

162 - 175 GOBO 7 SHAKE

176 - 183 GOBO 8

184 - 197 GOBO 8 SHAKE

198 - 205 GOBO 9

206 - 219 GOBO 9 SHAKE

220 - 227 GOBO 10

228 - 241 GOBO 10 SHAKE

242 - 249 BLACKOUT

250 - 255 BLACKOUT SHAKE

5 GREEN LASER

0 - 127 LASER OFF

128 - 255 LASER ON

1 2 3 654 97 8 10

1 2

Head 4

457 8 109

Head 3

4587

Head 2

109

Master/Slave Chart

Master-Head 1

126

457 8 109

1087 94 5 6321

Head 2

Head 3

Head 4

1 2 43

21 43

86 7910

876 9 10

Master/Slave Chart

Master-Head 1

1 2 43 8

67910

Program1 Program 2

Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5

Gobo 8

Gobo 7Gobo 6 Gobo 9 Gobo 10

Fusion Scan 250™ Warranty

1-YEAR LIMITED WARRANTY

A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be

free of manufacturing defects in material and workmanship for a period of 1 Year (365 days)

from the date of purchase. This warranty shall be valid only if the product is purchased

within the United States of America, including possessions and territories. It is the owner’s

responsibility to establish the date and place of purchase by acceptable evidence, at the

time service is sought.

B. For warranty service, send the product only to the American DJ® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement)

are within the terms of this warranty, American DJ® will pay return shipping charges only

to a designated point within the United States. If the entire instrument is sent, it must be

shipped in its original package. No accessories should be shipped with the product. If any

accessories are shipped with the product, American DJ® shall have no liability whatsoever

for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modiﬁed in any manner which American DJ® concludes, after inspection, affects the reli-

ability of the product; if the product has been repaired or serviced by anyone other than

the American DJ® factory unless prior written authorization was issued to purchaser by

American DJ®; if the product is damaged because not properly maintained as set forth in

the User Manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period speciﬁed above, American DJ® will replace defec-

tive parts at its expense, and will absorb all expenses for warranty service and repair labor

by reason of defects in material or workmanship. The sole responsibility of American DJ®

under this warranty shall be limited to the repair of the product, or replacement thereof,

including parts, at the sole discretion of American DJ®. All products covered by this war-

ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E. American DJ® reserves the right to make changes in design and/or improvements upon

its products without any obligation to include these changes in any products theretofore

manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any acces-

sory supplied with products described above. Except to the extent prohibited by applicable

law, all implied warranties made by American DJ® in connection with this product, includ-

ing warranties of merchantability or ﬁtness, are limited in duration to the warranty period

set forth above. And no warranties, whether expressed or implied, including warranties of

merchantability or ﬁtness, shall apply to this product after said period has expired. The

consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly

provided above; and under no circumstances shall American DJ® be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

G. This warranty is the only written warranty applicable to American DJ® Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions

heretofore published.

H. All lamps and fuses are not covered under this warranty.

Fusion Scan 250™ Notes

Specifications: Fusion Scan 250™

Weight: 11.4 Lbs.

Dimensions: 21” (L) x 9” (W) x 9.5” (H)

Lamp: ZB-ELC 24v/250w

Laser: 4.9mW Green Diode

Breaker: 5 Amp

Voltage*: 120v/220v, 60Hz/50Hz

Gobos: 10 Plus Spot

Colors: 7 Plus White

Cooling: Fan Cooled

Working Position: Any Safe Position

* Operating voltage is preset at the factory.

Please Note: Speciﬁcations and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

American DJ World Headquarters:

4295 Charter Street Los Angeles, CA 90058 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

Andere Handbücher für Fusion Scan 250

Inhaltsverzeichnis

Andere American DJ DJ-Equipment Handbücher

American DJ

American DJ 3.3 Bedienungsanleitung

American DJ

American DJ Tempest 250MSD Bedienungsanleitung

American DJ

American DJ Ruby Royal Bedienungsanleitung

American DJ

American DJ LED Quest Bedienungsanleitung

American DJ

American DJ Revo Sweep Bedienungsanleitung

American DJ

American DJ Roto-Balls VS MKII Bedienungsanleitung

American DJ

American DJ DJ Spot 250 Bedienungsanleitung

American DJ

American DJ Snap Shit DMX/D Bedienungsanleitung

American DJ

American DJ Wave Bedienungsanleitung

American DJ

American DJ Roto-Balls Montageanleitung

American DJ

American DJ Micro Star Bedienungsanleitung

American DJ

American DJ Crusader Bedienungsanleitung

American DJ

American DJ UVLED Bar16 Bedienungsanleitung

American DJ

American DJ Flash-1C Bedienungsanleitung

American DJ

American DJ Aquarius Bedienungsanleitung

American DJ

American DJ Gobo Motion LED Bedienungsanleitung

American DJ

American DJ Rover LED Bedienungsanleitung

American DJ

American DJ Inno Color Beam Z7 Bedienungsanleitung

American DJ

American DJ Warp! Bedienungsanleitung

American DJ

American DJ 46HP LED Bedienungsanleitung

American DJ

American DJ Fusion Scan 250 Bedienungsanleitung

American DJ

American DJ Duo Scan RG Bedienungsanleitung

American DJ

American DJ Mega Flash DMX Bedienungsanleitung

American DJ

American DJ Flat Par QWH5 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung