American DJ RotoPod 250 Bedienungsanleitung

American DJ®

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

Introduction: Thank you for purchasing the RotoPod 250™ by Ameri-

can DJ®. The RotoPod 250™ is an brighter improvement of the pop-

ular RotoPod™ by American DJ®. This new unit includes a thermal

shutoff that will automatically shut down the unit if it gets too hot, and

automatically restart it after it has cooled down. It also comes with a

bright 24v/250w bulb and a new high tech, light weight case design

to produce a spectacular moon flower effect. This unit also includes

superior optics for an overall crisp light output which intensifies beam

intensity. The unit comes with a two position mode switch that allows

the unit to operate in either a rotating mode or a static mode.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments or

suggestions. Service Hours are Monday through Friday 9:00 a.m. to

5:00 p.m. Paciﬁc Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or ﬁre, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

Please recycle the shipping carton whenever possible.

RotoPod 250™ Introduction and Unpacking

©American DJ Supply® - www.americandj.com - RotoPod 250™ Instruction Manual Page 2

User Instructions Unpacking: Every RotoPod 250™ has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If

the carton appears to be damaged, carefully inspect your units for any

damage and be sure all accessories necessary to operate the system

have arrived intact. In the event damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Please do not return the system to your dealer with-

out ﬁrst contacting customer support.

Rev. 12/04

American DJ®

RotoPod 250™ Operating Instructions

RotoPod 250™ Warranty Registration

The RotoPod 250™ carries a one year (365 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included

in the shipping container. If the unit is under warranty, you must pro-

vide a copy of your proof of purchase invoice. You may obtain a R.A.

number by contacting customer support at (800) 322-6337.

RotoPod 250™ Features

• Includes Built-In Hanging Yoke

• Two Different Operating Modes

• Easy Access Lamp Replacement

• Light Weight

• Futuristic Case Design

• Low Cost LL-EHJ 24v/250w Lamp

• Thermal Shutoff (Automatically shutsdown the unit if it gets to hot,

and automatically restarts when it cools down)

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

RotoPod 250™ General Instructions

©American DJ Supply® - www.americandj.com - RotoPod 250™ Instruction Manual Page 3 ©American DJ Supply® - www.americandj.com - RotoPod 250™ Instruction Manual Page 4

General Operation:

This fixture is designed to operate as a stand alone unit, there is no

need of a controller. There is no power switch, after plugging the unit

in, if there is no lamp output check the fuse and bulb. After plugging

this fixture in, the units clear mirror dish will rotate. This fixture fea-

tures a light weight case design and a hanging bracket. This fixture

is designed for mobile DJ’s, clubs, bands, roller rinks and any arena

that requires a compact, light weight, easy to use fixture. Use a fog

machine or other type of special effect smoke to enhance the beam

intensity.

Operating Modes:

This unit comes with a 2-way multi-operating switch located on the

rear of the unit. The switch controls two (2) different operating modes;

Static, and Continuous Rotation.

This unit is equipped with a built-in safety breaker. This breaker is

designed to close the power circuit in the event of an internal short

or power surge. This will reduce the risk of electrical shock or ﬁre and

protect the circuitry. To reset the breaker, push the breaker button in

until you hear it “pop” back in to place. If the breaker continues to

pop, stop using the unit and contact our customer support team, the

unit may need to be returned for service.

©American DJ Supply® - www.americandj.com - RotoPod 250™ Instruction Manual Page 5 ©American DJ Supply® - www.americandj.com - RotoPod 250™ Instruction Manual Page 6

RotoPod 250™ Lamp Replacement RotoPod 250™ Breaker Reset

Trouble Shooting: Listed below are a few common problems that you

may encounter, with solutions.

No light output from the unit;

1. Be sure you have connected your unit into a wall outlet with a

matching power supply.

2. Be sure the external breaker has not popped. The breaker is locat-

ed on the rear panel.

3. Remove the lamp cover and be sure the lamp is seated in the

socket properly. Occasionally lamps become loose during ship-

ping, be sure the lamp is push in to the socket completely.

4. Be sure the lamp is good.

RotoPod 250™ Trouble Shooting

Caution: Always replace with the exact same type lamp, unless oth-

erwise specified by an authorized American DJ® technician. Replace

with anything other than the specified part can damage your unit and

will void your manufactures warranty.

Warning: If after you have replaced the lamp or reset the breaker

and you continue to blow either one, STOP using the unit. Contact

customer support for further instructions, you may have to return the

unit for servicing. Continuing to use the unit may cause serious dam-

age.

Lamp Replacement: Caution! Never open the unit when in use.

Always disconnect the main power and allow the fixture ample time

to cool before attempting to replace the lamp. Lamp replacement has

been made simple by incorporating a split dome that is retained by

thumb screws. Again, please remember to always replace with the

exact same type lamp.

1. Be sure to follow the proper procedures when handling halogen

lamps. Never touch the new lamp with your bare fingers.

2. Unscrew the two thumb screws located on the bottom front of

the unit.

3. Once the thumb screws have been removed, pull the lamp

assembly cover plate up to expose the lamp.

4. Remove and replace the lamp with an exact match.

5. Reassemble in reverse order.

Halogen Lamp Warning: This fixture is fitted

with halogen lamps which are highly susceptible

to damage if improperly handled. Never touch the

lamps with your bare fingers as the oil from your

hands will shorten lamp life. Also, never move the

fixture until the lamps have had ample time to cool.

Remember, lamps are not covered under warranty

conditions.

Please Note: Speciﬁcations and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

MODEL: RotoPod 250™

VOLTAGE*: 120v~60Hz or 220v~50/60Hz

POWER DRAW: 1.9 Amps

LAMP: LL-EHJ 24v/250w

DIMENSIONS: 11.5” L x 8” W x 9” H

WEIGHT: 5.5 Lbs/2.4 Kgs.

BREAKER: 5 AMP

WORKING POSITION: ANY SAFE POSITION

COOLING: FAN COOLED

GOBOS: NONE

COLORS: CLEAR MIRROR DISH

WARRANTY: 1 YEAR (365 DAYS)

OPTIONS: Z-DW, Z-DW1, & Z-DW-2 -

Dichroic Color Dishes

* Voltage is preset at the factory

RotoPod 250™ Specifications

©American DJ®

A Division of the American DJ® Group of Companies

World Headquarters:

4295 Charter Street Los Angeles, CA 90058 USA

Tel: 323-582-2650 Fax: 323-582-2610

Web: www.americandj.com E-mail: [email protected]

©American DJ Supply® - www.americandj.com - RotoPod 250™ Instruction Manual Page 7

1-YEAR LIMITED WARRANTY

A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be

free of manufacturing defects in material and workmanship for a period of one year (365

days) from the date of purchase. This warranty shall be valid only if the product is pur-

chased within the United States of America, including possessions and territories. It is the

owner’s responsibility to establish the date and place of purchase by acceptable evidence,

at the time service is sought.

B. For warranty service, send the product only to the American DJ® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement)

are within the terms of this warranty, American DJ® will pay return shipping charges only

to a designated point within the United States. If the entire instrument is sent, it must be

shipped in its original package. No accessories should be shipped with the product. If any

accessories are shipped with the product, American DJ® shall have no liability whatsoever

for loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is

modiﬁed in any manner which American DJ® concludes, after inspection, affects the reli-

ability of the product; if the product has been repaired or serviced by anyone other than

the American DJ® factory unless prior written authorization was issued to purchaser by

American DJ®; if the product is damaged because not properly maintained as set forth in

the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning

or periodic check-up. During the period speciﬁed above, American DJ® will replace defec-

tive parts at its expense, and will absorb all expenses for warranty service and repair labor

by reason of defects in material or workmanship. The sole responsibility of American DJ®

under this warranty shall be limited to the repair of the product, or replacement thereof,

including parts, at the sole discretion of American DJ®. All products covered by this war-

ranty were manufactured after January 1, 1990, and bear identifying marks to that effect.

E. American DJ® reserves the right to make changes in design and/or improvements upon

its products without any obligation to include these changes in any products theretofore

manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any acces-

sory supplied with products described above. Except to the extent prohibited by applicable

law, all implied warranties made by American DJ® in connection with this product, includ-

ing warranties of merchantability or ﬁtness, are limited in duration to the warranty period

set forth above. And no warranties, whether expressed or implied, including warranties of

merchantability or ﬁtness, shall apply to this product after said period has expired. The

consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly

provided above; and under no circumstances shall American DJ® be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

G. This warranty is the only written warranty applicable to American DJ® Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions

heretofore published.

H. Lamps are not covered under this or any other warranty, either written or implied.

RotoPod 250™ Warranty

Andere American DJ DJ-Equipment Handbücher

American DJ

American DJ Sonic Beam II Bedienungsanleitung

American DJ

American DJ X-Scan LED Plus Bedienungsanleitung

American DJ

American DJ DURA SPOT I50 Bedienungsanleitung

American DJ

American DJ Utopia 250S Bedienungsanleitung

American DJ

American DJ Mega Panel LED Bedienungsanleitung

American DJ

American DJ Roto-Balls VS MKII Bedienungsanleitung

American DJ

American DJ LTS-2 Bedienungsanleitung

American DJ

American DJ TRI PHASE Bedienungsanleitung

American DJ

American DJ Mega Panel LED Bedienungsanleitung

American DJ

American DJ HMI 575TM Bedienungsanleitung

American DJ

American DJ Dual Gem Pulse Bedienungsanleitung

American DJ

American DJ Revo Roll LED Bedienungsanleitung

American DJ

American DJ DJ Spot 250 Bedienungsanleitung

American DJ

American DJ 64WH LED PRO Bedienungsanleitung

American DJ

American DJ 1.4 Bedienungsanleitung

American DJ

American DJ Space Balls Bedienungsanleitung

American DJ

American DJ Rolling Star II Bedienungsanleitung

American DJ

American DJ X-CALIBUR Bedienungsanleitung

American DJ

American DJ Gobo Flash 4 Bedienungsanleitung

American DJ

American DJ Reflex Bedienungsanleitung

American DJ

American DJ Flash Tube Buffer Bedienungsanleitung

American DJ

American DJ Rolling Star Bedienungsanleitung

American DJ

American DJ Groove Wheel Bedienungsanleitung

American DJ

American DJ Hyper Gem LED Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung