AMP Lighting BulletPro MR8 Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® BulletPro MR8 Spotlight

AAL-1033

AMP®BulletPro MR8 Spotlight

AAL-1033

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

This luminaire is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and in-

structions may result in serious injury, property damage and void the warran-

t y.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (transform-

er) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm) in

order to connect to the main low voltage cable.

5. Wiring connections must be made with UL Listed wire connectors that

are suitable for the application.

6. Position the wire connector so that it is located within 6 inches (15.2 cm)

from a building structure, a luminaire, or tting.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

Parts Required (sold separately)

A. (1) MR8 Lamp

0.7”

1.4”

2.45”

3.4”

Install Stake

Board

Ground

Soil

Stake

Determine the desired location

for mounting the stake. Hammer

the stake into the ground until

ange of stake is ush to grade.

To avoid damage to the stake,

place a board on top of the stake

while hammering.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®BulletPro MR8 Spotlight

AAL-1033

Install Glare Guard and Shield to Fixture

Install Fixture Body to Stake

Fixture Body

Fixture Wire

Ground

Soil

Stake

Pass the xture wire through

the center hole of the stake.

Thread the xture body onto

the stake and hand tighten until

snug.

Strip both leads from the xture body. Using two wire connectors (sold

separately), connect the leads from xture body to the main supply

cable leads.

Pigtail

Main Supply Cable

Supply Wire from

Fixture Body

Wire Connectors

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®BulletPro MR8 Spotlight

AAL-1033

Remove Glare Guard

Rotate the glare guard counter-

clockwise to remove it from the

xture body.

Fixture Body

Glare Guard

Rotate

Install MR8 Bulb

Insert the MR8 bulb with the

correct wattage and type

marked on the xture label and

push into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Socket

MR8 Bulb

Install Glare Guard

Push the glare guard back onto

the xture body and rotate it

until it is secured.

Fixture Body

Glare Guard

Rotate

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®BulletPro MR8 Spotlight

AAL-1033

Adjust Direction

Loosen the knuckle at the joint to

adjust the luminaire to your de-

sired direction. Always tighten the

knuckle once your desired direc-

tion is achieved.

Luminaire Rotate

Knuckle

Install/Replace MR8 Bulb

Please reverse Step 5 - Step 6 to expose the MR8 bulb and replace it with

correct wattage and type marked on xture label. Then reinstall the glare

guard.

IMPORTANT: MR8 bulb must be protected from moisture and dust at all

times. Always reinstall glare guard when removed.

–6––6–

[email protected] • 813.978.3900

–7–

IS-AAL-1033-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting BeaconPro Path & Area Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1017-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASSI-9008-50-BK Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro AHT-3517-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro AAR-3518-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3028 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting 3602 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Box ASDL-2014-P-BK Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting DecoPro ADL-2012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EquaPro Flood Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-67 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Slimline VAC-SLMTIMER1 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung