AMP Lighting 3602 Series Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Line Voltage Landscape Lighting

AMP® Estate Size Path & Area Lights

3602 Series

AMP®Estate Size Path & Area Lights

3602 Series

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

10.25”

6”

3”

Estate Size Hat featured

on Estate Size Line

Voltage Stem

36”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®Estate Size Path & Area Lights

3602 Series

Remove Stem Top

Install Lamp

Loosen the stem top and remove

it from the top end of the stem.

Stem

Stem Top

Insert the lamp with the correct

wattage and type marked on the

xture label and push rmly into

place.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

Socket

Lamp

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®Estate Size Path & Area Lights

3602 Series

Install Stem Top

Install Stake and Conduit

Thread the stem top onto the

stem and hand tighten until

snug.

Stem Top

Stem

Dig a hole in the ground for the conduit runs and the stake. Install the

conduit. Slide the stabilizer grid onto the stake and secure with the

screws. Place the stake over the conduit runs then backll against the

mounting stake.

Stake

Stabilizer

Grid

Conduit

Ground Level

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®Estate Size Path & Area Lights

3602 Series

Remove Cap from Stake

Remove the cap from the stake

by loosening the set screws.

Set Screw

Cap

Stake

Install Cap to Junction Box

Thread the cap onto the Junction

Box.

Cap

Junction Box

* Junction Box is not

provided

–6––6–

[email protected] • 813.978.3900

–7–

Install Fixture to Junction Box

Remove the cover from the junction

box by loosening the screws. Place

the xture supply wires into the

junction box.

Thread the junction box onto the

bottom of the xture and hand

tighten until snug.

Fixture

Junction Box

Supply Wires

Screw

Cover * Junction Box is not

provided®

Install Junction Box to Stake

Pass the main supply cable into

the junction box. Place the cap

back onto the stake and secure

with the previously removed

screws. Tighten until snug with a

screwdriver.

Main Supply Cable

Junction Box

Cap

Screw

Stake Conduit * Junction Box is not

provided

INSTALLATION & MAINTENANCE GUIDE

AMP®Estate Size Path & Area Lights

3602 Series

Strip the leads from the xture supply wire and main supply cable. Using

wire connectors (sold separately), connect the leads from the xture

supply wire to the main supply cable leads. Then, connect the ground

wires to the ground screw in the junction box.

After wiring, carefully tuck the slack wires into the junction box. Attach

the cover back onto the junction box and secure with the previously

removed screws. Bury conduits and junction box.

Main Supply Cable

Wire Connectors

Junction Box

Screw

Cover

Fixture Supply Wires

Ground Screw

* Junction Box is not

provided

Wire Connection

www.amplighting.com

–8–

Install/Replace Lamp

Install Hat

Place the hat onto the stem top and secure it with the nial, or thread

the hat onto the stem top directly. Hand tighten until snug.

Stem Top

Finial

Hat of your choice

Remove the nial, hat and stem top to expose the lamp and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the stem top, hat and nial.

IMPORTANT: Lamps must be protected from moisture and dust at all

times. Always reinstall the stem top and hat when removed.

[email protected] • 813.978.3900

–9–

–10–

www.amplighting.com

INSTALLATION & MAINTENANCE GUIDE

AMP®Estate Size Path & Area Lights

3602 Series

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PAR36 Well Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Deck-DesignPro Classic Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAL-91 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASSI-9008-50-BK Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Top Solar LED Post-Top Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting 3601 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EquaPro Flood Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5005-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AviatorPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TieredPro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung