AMP Lighting TuscanPro AHT-3517-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® TuscanPro Path & Area Light

AHT-3517-B-BZ

AMP®TuscanPro Path & Area Light

AHT-3517-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

–3–

Package Contents

A. (1) Hat

Parts Sold Separately

A. (1) Decorative Arm

Product Dimensions

3.5”

9.6”

11”

9”

22.15”

Decorative arm

sold separately

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®TuscanPro Path & Area Light

AHT-3517-B-BZ

Remove Stem Top

Loosen the stem top

and remove it from the

top end of the stem.

Stem

To p

Stem

Place the decorative

piece onto the top end

of the stem as shown.

Stem

Decorative Piece

Install Lamp

Insert the lamp with the correct

wattage and type marked on the

xture label and push rmly into

place.

CAUTION: Do not exceed maximum

wattage marked on xture label.

Socket

Lamp

Install Decorative Piece (optional)

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®TuscanPro Path & Area Light

AHT-3517-B-BZ

Remove Washer and Finial

Loosen the nial and remove

the nial, coupler and washer

from the stem top.

Finial

Stem Top

Coupler

Washer

Install Stem Top

Place the stem top over the

lamp and thread the stem

top onto the stem. Hand

tighten until snug.

Stem Top

Stem

Install Coupler to Hat

Thread the coupler onto

the hat and hand tighten

until snug.

Hat

Coupler

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®TuscanPro Path & Area Light

AHT-3517-B-BZ

Install Hat

Thread the hat onto the stem

top and hand tighten until

snug.

Stem To p

Hat

Install Stake

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake is

ush to grade. To avoid

damage to the stake, place a

board on top of the stake while

hammering.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

Stake

Soil

Ground

[email protected] • 813.978.3900

–7–

Install/Replace Bulb

Install Stem to Stake

Clear away an area in the

ground at the wireway slot

on top of the stake. Lay the

luminaire pigtail into the

wireway slot and secure the

stem onto the stake. Tighten

until snug.

Stem

Stake

Pigtail

Wireway Slot

Wire Connection

Strip both leads from the luminaire. Using two wire

connectors (sold separately), connect the leads from the

xture to the main supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

Remove the hat and stem top to expose the lamp and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the stem top and hat.

IMPORTANT: Lamps must be protected from moisture and dust at all

times. Always reinstall the stem top and hat when removed.

IS-AHT-3517-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-30XXIR Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAL-91 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting DecoPro ADL-2012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting G2 ControlPro Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-7006-X-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EquaPro Flood Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BulletPro MR8 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Box Brass ASDL-2014-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PAR36 Well Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-712IR-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AtomPro Mini LED Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAR-I-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TieredPro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung