AMP Lighting Sol Box Brass ASDL-2014-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Solar Landscape Lighting

AMP® Sol Box Brass

ASDL-2014-B-BZ

AMP®Sol Box Brass

ASDL-2014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

This luminaire is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and in-

structions may result in serious injury, property damage and void the warran-

t y.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situations.

Please note that these solar xtures are equipped with built-in photocells, so

they will not turn on until it is dark enough. These xtures will also require

plenty of sunlight to function properly. It’s best to have the xture in an area

where the sun will get to it at all times throughout the day and where no am-

bient lighting will affect the photocell at night. If your xture is not function-

ing at night, be sure that the on/off button has been engaged. See step one

for details.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Lamp gets HOT quickly!

2. Do not touch the hot lens, guard or enclosure.

3. Keep lamp away from materials that may burn.

4. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-

age lamp.

5. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

B. (1) Solar Panel Box

C. (1) Cover Plate

D. (2) Mounting Brackets

E. (4) Screws

F. (4) Wall Anchors

3”

2.25”

LUMINAIRE

SOLAR PANEL BOX

4.2”

2.2”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®Sol Box

ASDL-2014-B-BZ

Test Solar Light

Two installation options are provided. Choose the one according to your

installation environment:

Option 1: Plenty of sunlight.

Option 2: Lack of sunlight.

Press the ON/OFF switch on

the back of the xture body.

Place the solar light on a

non-abrasive surface with

the solar panel against the

surface to test the xture.

There will be a short delay

for the xture to light up.

The xture will light up when

the solar panel is covered

and turn back off when it is

uncovered.

Now you can proceed to next

steps of installations knowing

the xture is in ON mode.

On/Off Switch

Fixture Body

Non-abrasive Surface

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®Sol Box Brass

ASDL-2014-B-BZ

Install Mounting Bracket

1. Place the mounting bracket onto

the desired location and mark two

points on the wall for the wall

anchors.

2. Remove the mounting bracket. Drill

the proper holes on the marks for

the wall anchors by using an elec-

trical drill.

3. Push the wall anchors into the

drilled holes.

4. Attach the mounting bracket onto

the wall anchors and secure with

the screws. Tighten until snug with

a screwdriver.

WALL SURFACE

Mounting

Bracket

Screw

Wall Anchor

Hole

Place Fixture Body on to Mounting Bracket

Attach the bracket on the

back of the xture body to the

mounting bracket on the wall.

WALL SURFACE

Mounting

Bracket

Solar Panel Box

Fixture Body

INSTALLATION OPTIONAL 1

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®Sol Box Brass

ASDL-2014-B-BZ

INSTALLATION OPTIONAL 2

Solar Panel Box

PLENTY OF SUNLIGHT

LACK OF SUNLIGHT

Fixture Body Max. 8.5”

If the luminaire is going to be installed in a location where there is low

sunlight, make sure it is still close to an area where there is plenty of

sunlight for the solar panel to be installed separately.

Note: This distance must be less then 8.5 inches.

Install Mounting Bracket

1. Drill a .90” round hole through

the desired mounting location.

2. Place the mounting bracket above

the hole and mark two points on

the wall using the two mounting

bracket holes as guides.

3. Remove the mounting bracket and

drill proper holes on the marks

for the wall anchors using an

electrical drill.

4. Push the wall anchors into the

drilled holes.

5. Attach the mounting bracket

onto the wall anchors and secure

with screws. Tighten using a

screwdriver.

WALL SURFACE

Mounting

Bracket

Screw

Wall Anchor

.90” Hole

Hole

–6––6–

[email protected] • 813.978.3900

–7–

Remove Solar Panel Box from Fixture Body

Slide the solar panel box off the top of the xture body to remove it.

Solar Panel Box

Fixture Body

Disconnect Quick Connector

Disconnect the quick connector to

separate the male connector from

female connector.

Female connector

Male connector

Install Cover Plate

Insert the cover plate onto the top

of the xture body.

Cover Plate

Fixture Body

INSTALLATION & MAINTENANCE GUIDE

AMP®Sol Box Brass

ASDL-2014-B-BZ

Install Fixture Body onto Mounting Bracket

Go to step 1 to install another mounting bracket onto the sunlit area for

the solar panel. Pull the female connector to the other side then go the

step 6.

Pass the female connector and

wire through the hole. Place

the bracket on the back of the

xture body onto the mounting

bracket.

WALL SURFACE

Mounting

Bracket

Fixture Body

.90” Hole

Female connector

Wire

Connect Quick Connector

Insert the female connector

into the male connector and

secure the cap to tighten the

quick connector.

Female connector

Male connector

–8–

www.amplighting.com

–8–

Install Solar Panel Box on to Mounting Bracket

Carefully tuck the quick connector

and wire inside of the hole. Place

the bracket of the solar panel box

onto the mounting bracket.

WALL SURFACE

Mounting

Bracket

Wire

Hole

Quick connector

Solar Panel Box

[email protected] • 813.978.3900

–9–

Install Solar Panel Box on to Mounting Bracket

INSTALLATION & MAINTENANCE GUIDE

AMP®Sol Box Brass

ASDL-2014-B-BZ

Solar Panel Box

Quick Connector

Cover Screw

Battery Pack

1. Using a screwdriver, remove the screws from the cover of the solar

panel box.

2. Disconnect the quick connector.

3. Remove the battery pack out of the solar panel box and replace it

with a new one.

4. Connect the quick connector to the new battery pack and place

the cover back onto the solar panel box. Secure it with previously

removed screws.

–10–

www.amplighting.com

–10–

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AAL-1012 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting KinglyPro APL-3020-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AxialPro APL-3025-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro AAR-3518-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting OrchardPro APL-3018-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Slimline VAC-SLMTIMER1 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASSI-9008-50-BK Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AtomPro Mini LED Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting FoundationPro Paver Light Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung