AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® Customizable Bollard Light

APL-3032-26-4-B-BZ

AMP®Customizable Bollard Light

APL-3032-26-4-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

Important Safety Instructions

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply

(transformer) rated maximum of 50 watts (25 AMPS) at 12 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)

in order to connect to the main low voltage cable.

5. Wiring connections must be made with UL listed wire connectors that

are suitable for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

[email protected] • 813.978.3900

–3–

Package Contents

A. (1) Fixture Body C. (2) Threaded Couplers

B. (2) Bi-Pin Brass Puck Lights

Sold Separately

A. (4) Side Panels

B. Mounting Accessory

Product Dimensions

8”x8”

6.38”x6.38”

25.87”

3”

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®Customizable Bollard Light

APL-3032-26-4-B-BZ

Remove Top Cover

Push

Rotate

Remove

Top Cover

Fixture

Push the top cover down and rotate it clockwise to remove it from the

xture.

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®Customizable Bollard Light

APL-3032-26-4-B-BZ

Install Side Panels

Insert the side panels of your choice into the slots on the xture body.

Side Panel

Slot

Fixture

OPTIONAL SIDE PANELS

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®Customizable Bollard Light

APL-3032-26-4-B-BZ

Install Top Cover

Push

Rotate

Top Cover

Hole

Bolt

Fixture

Align the bolts on the top cover

to the holes on top of the xture.

Insert the bolts into the holes and

push down. Then rotate the top

cover counter clockwise to secure

it in place.

Install Stakes to Fixture

Lay the xture down on a at surface. Twist the couplers into the mount-

ing holes on the bottom of the xture. Then thread the stakes onto the

couplers. Hand tighten until snug to secure the stakes to the xture.

Fixture Stake

Coupler

–6––6–

[email protected] • 813.978.3900

–7–

INSTALLATION & MAINTENANCE GUIDE

AMP®Customizable Bollard Light

APL-3032-26-4-B-BZ

Install Fixture

Fixture

Determine the desired location for

the xture. Insert the stakes into

the ground until ange of stakes

are ush to grade.

NOTE: If the ground is hard and the

stakes are difcult to install, make

a crosscut in the ground using a at

shovel.

Stake

Soil

Ground

Pigtail

Wire Connection

Strip both leads from the luminaire pigtail. Using two UL listed wire

connectors (sold separately), connect the leads from the xture to the

main supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

Replace Bi-Pin

12 3

1. Remove the cover off the bottom and top of the xture.

2. Using a screwdriver, remove the two screws from the socket base.

Insert the Bi-pin brass puck light onto the socket and secure with the

two screws.

3. Thread the previously removed cover back onto the socket base.

CAUTION: This xture is for LED use only. Do not exceed maximum watt-

age marked on luminaire label.

NOTE: DO NOT touch the Bi-pin brass puck light with bare hands. Use soft

cloth to handle the puck light.

Cover

Socket

Base

Socket

Base

Socket

Screw Bi-pin

Puck Light

–8–

www.amplighting.com

–8–

INSTALLATION & MAINTENANCE GUIDE

AMP®Customizable Bollard Light

APL-3032-26-4-B-BZ

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting ONE HydraPro AWL-700IR-25-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AlpinePro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BeaconPro Path & Area Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting SleekPro MR11 Downlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro AAL-1028-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BulletPro MR8 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3016-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting InfusePro Step Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro AAR-3518-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-67 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASDL-2014-P-WH Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting MR16 HydraPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Top Solar LED Post-Top Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AxialPro APL-3025-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASAL-1025-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung