AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

1”

0.75”

2.83”

2.3”

2.5”

5.5”-7.5”

There are three types of mounts that are sold separately for this xture;

the Stake Mount, Surface Mount and Tripod Mount.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

Wire Connection

Install Stake

Option1: Stake Mount

Integrated Hub Top

Main Supply Wires

Fixture Wires

Connectors

Stake Mount

Main Supply Wire

Continuation

Insert the main supply wire continuation (if needed) and the main sup-

ply wire up through the bottom of the stake mount and strip the ends of

both sets of supply wires.

Attach the xture wires and both sets of the main supply wires to their

correct connectors in the integrated hub top.

Once the wires are installed properly, thread the integrated hub top

back onto the stake mount and hand tighten until snug.

Board

Ground

Soil

Stake

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake is

ush to grade. To avoid damage

to the stake, place a board on top

of the stake while hammering.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

Install Stake Mount

Stake Mount

Ground

Supply Wires

Wireway Slot

Soil

Stake

Clear away an area in the ground

at the wireway slot on top of

the stake. Lay the supply wires

into the wireway slot and screw

the stake mount on to the stake.

Tighten until snug.

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

Wire Connection

Integrated Hub Top

Main Supply Wires

Fixture Wires

Connectors

Surface Mount

Main Supply Wire

Continuation

Insert the main supply wire continuation (if needed) and the main

supply wire up through the bottom of the surface mount and strip the

ends of both sets of supply wires.

Attach the xture wires and both sets of the main supply wires to their

correct connectors in the integrated hub top.

Once the wires are installed properly, thread the integrated hub top

back onto the surface mount and hand tighten until snug.

Option 2: Surface Mount

Install Surface Mount

Screw

Optional Anchor

Surface Mount

Washer

Place the surface mount onto

the desired location and secure

it with the screws. Tighten with

a screwdriver. Nylon spacers are

required when installing on trees.

–6––6–

[email protected] • 813.978.3900

–7–

Option 3: Tripod Mount

Wire Connection

Integrated Hub Top

Main Supply Wires

Fixture Wires

Connectors

Tripod Mount

Main Supply Wire

Continuation

Insert the main supply wire continuation (if needed) and the main sup-

ply wire up through the bottom of the tripod mount and strip the ends

of both sets of supply wires.

Attach the xture wires and both sets of the main supply wires to their

correct connectors in the integrated hub top.

Once the wires are installed properly, thread the integrated hub top

back onto the tripod mount and hand tighten until snug.

Install Tripod Mount

Screw

Optional

Anchor

Tripod Mount

Washer

Place the tripod mount onto the

desired location and secure it

with the screws. Tighten with a

screwdriver. Nylon spacers are

required when installing on trees.

INSTALLATION & MAINTENANCE GUIDE

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

Bulb Installation

Remove Glare Guard and Lens

Loosen the lens and the set

screw and remove the glare

guard.

Lens

Fixture Body

Glare Guard

Set Screw

Install Bulb

Insert the bulb with the correct

wattage and type marked on the

luminaire label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle

bulb.

Socket

Bulb

www.amplighting.com

–8–

Install Lens and Glare Guard

INSTALLATION & MAINTENANCE GUIDE

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

Thread the lens onto the xture

body and hand tighten.

Then, place the glare guard onto

the lens and secure with the

previously removed set screw.

Lens

Set Screw

Glare Guard

Fixture Body

[email protected] • 813.978.3900

–9–

INSTALLATION & MAINTENANCE GUIDE

AMP®VariantPro with Integrated Hub Base

AAL-1024-0-B-BZ

www.amplighting.com

–10–

Install/Replace Bulb

Loosen the set screw to remove the glare guard and the lens to expose the

bulb. Replace it with the correct wattage and type marked on the xture

label. Then reinstall the lens and glare guard.

IMPORTANT: Halogen bulbs must be protected from moisture and dust at all

times. Always reinstall lens when removed.

Andere Handbücher für AAL-1024-0-B-BZ

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AHS-67 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EquaPro Flood Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro AAR-3518-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Box Brass ASDL-2014-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro Mini Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASDL-2014-P-WH Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AMP RGBW Max PinnaclePro LED Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting HydraPro AWL-5005-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AviatorPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-30XXIR Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AxialPro APL-3025-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting 3601 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EscherPro MR11 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3031-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung