AMP Research BEDXTENDER HD MAX 74841-00A Bedienungsanleitung

rev 05.02.19

1/7

www.amp-research.com

ASSEMBLY & INSTALLATION GUIDE

APPLICATION YEAR

GM Silverado/Sierra 2019

Remove contents from box and check for damage.

Verify all parts against parts list.

Read and understand instructions completely before attempting assembly

and installation.

INSTALLATION TIME

SKILL LEVEL

1= Easy

2 3 4

PART #

74841-00A (Silver) 74841-01A (Black)

TOOLS REQUIRED

Phillips screw driver

Torx T-20 driver

Torx T-25 driver

Power drill

1/8” drill bit

21/64” drill bit

Center punch

Supplied templates

Soapy Water

Masking Tape

BEDXTENDER HD™ shown assembled and installed on truck.

1 Hour

Invented, engineered and manufactured exclusively by AMP Research in the USA. May be covered by one of the

following patents:

5,700,047; 6,113,173; 6,402,215; 6,805,392; 7,063,366; 7,393,035; 7,654,598; 7,681,935; 7,841,638

3-Year Limited Warranty

WARRANTY

rev 05.02.19

2/7

www.amp-research.com

AMP RESEARCH BEDXTENDER HD™

PARTS LIST AND HARDWARE IDENTIFICATION

Quick Mount

Bracket Set

1x2 x4

Bumper

(Small Silver)

(Small Silver with LOGO)

(Small Black)

(Small Black with LOGO)

(Large/Deep Black)

(Large/Deep Black with LOGO)

(Large/Deep Silver)

(Large/Deep Silver with LOGO)

Center Tube

PT-Screw

x12 x2

Strap Buckle

Assembly

10 x2

Silver: (Small)

Black: (Small)

Silver: (Deep)

Black: (Deep)

Silver: (Large)

Black: (Large)

Pivot Upright Assembly

5x2

(Small/Narrow)

(Large/Deep)

Bumper Upright Outer

6x2

(Small/Narrow)

(Large/Deep)

Bumper Upright Inner

11 x3

7x4

M8 Bolt

8x4

M8 U-Nut

9x4

Bracket Nut

Plate

rev 05.02.19

3/7

www.amp-research.com

AMP RESEARCH BEDXTENDER HD™

MOUNTING BRACKET INSTALLATION - CHEVROLET SILVERADO / GMC SIERRA 2019

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING WITH INSTALLATION

Remove the tail lights using T20 torx driver. Carefully pull back to remove tail lights.

Assemble U-Nuts on to bracket plates in the

orientation shown.

M8 Bolt

Driver Passenger

M8 U-Nut

Bracket Nut Plate

rev 05.02.19

4/7

www.amp-research.com

AMP RESEARCH BEDXTENDER HD™

Enlarge hole in D-Pillar with 21/64” drill bit. Fasten the Quick Mount Bracket to the D-Pillar with one M8 Hex

Bolt and Bracket Nut Plate Assembly.

Allow the bracket to hang vertically. Using bracket as a template, mark (Center Punch) the upper hole of

the lower slot (indicated). Pre drill hole with 1/8” drill bit, losen upper mounting hole and rotate bracket away

from hole and open hole using a 21/64” drill bit. Remove burs, apply primer to edge of holes, and allow

primer to dry. Install brackets.

rev 05.02.19

5/7

www.amp-research.com

AMP RESEARCH BEDXTENDER HD™

BED X-TENDER ASSEMBLY

Adjust the width of the BEDXTENDER by placing

the pivots into the mounting brackets. To keep

overlap consant, adjust each tube so that the gap

between the edge and the tape is the same.

5 6

Slide 3 center tubes into the open ends of the bent

tubes as shown. Insert center tube with logo into the

center tube.

Connect the two halves. Make sure there is at least

3” overlap with the bent tubes on each side.

Measure 7” from each end of the three center

tubes and mark with tape. Tape is to be used as a

reference point

Note: Template

located on inside

of box.

rev 05.02.19

6/7

www.amp-research.com

AMP RESEARCH BEDXTENDER HD™

BED X-TENDER ASSEMBLY – CONTINUED

Adjust Strap Buckles to lock into the tailgate when BEDXTENDER is deployed.

Your assembly is now complete.

Tighten PT-Screws using a T-25 torx driver, starting

in the middle of each upright, then the outer screws

and lastly the remaining two to evenly tighten.

NOTE: Do not over tighten as this may strip out.

Fastener will reach a noticable stopping point.

Attach plastic upright around the tube juncture,

placing rubber bumpers into the two ends of the

upright.

NOTE: The inside of the upright is stepped

to t correctly around the small and large

diameter tubes.

Upright is not positioned in

center of tube joint.

rev 05.02.19

7/7

www.amp-research.com

AMP RESEARCH BEDXTENDER HD™

NOTE: Ensure that buckles are properly inserted into

latches by pulling on the straps after both buckles have

been inserted.

rev 01.03.12

9/8

www.amp-research.com

Congratulations on your purchase of the

AMP Research BEDXTENDER HD.

Here’s what you need know...

BEDXTENDER HD™ OPERATION

With the tailgate open, place BEDXTENDER pivot pins into the left and right mounting

brackets. Rotate to 45 until it drops into place, then lower onto the open tailgate.

Flip BEDXTENDER out to contain cargo in the truck bed when the tailgate is open.

CAUTION! 200lb maximum load on open tailgate. Always distribute cargo evenly and

properly secure inside bed. Do not secure cargo to the BEDXTENDER or the tailgate.

Before driving, secure BEDXTENDER by locking the provided strap buckles into the

truck’s tailgate latches. To release, pull tailgate handle. NOTE: Ensure that both

buckles are properly locked into the latches by pulling up on each strap.

Flip BEDXTENDER forward and close the tailgate to keep smaller cargo safe and

organized.

LIMITED WARRANTY

The material that your product is made from can be recycled.

Please also consider recycling the packaging that your

product came in.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMP Research Autozubehör Handbücher

AMP Research

AMP Research BedXTender HD MAX Series Bedienungsanleitung

AMP Research

AMP Research PowerStep 77254-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75300-01A Bedienungsanleitung

AMP Research

AMP Research Power Step 77121-01A Bedienungsanleitung

AMP Research

AMP Research BedStep AMP 75311-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75327-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75330-01A Bedienungsanleitung

AMP Research

AMP Research PowerStep 75132-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 2 Bedienungsanleitung

AMP Research

AMP Research PowerStep 77238-01A Bedienungsanleitung

AMP Research

AMP Research POWERSTEP 76141-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75317-01A Bedienungsanleitung

AMP Research

AMP Research Power Step Bedienungsanleitung

AMP Research

AMP Research PowerStep 75155-01A Bedienungsanleitung

AMP Research

AMP Research Power Step 76331-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75325-01A Bedienungsanleitung

AMP Research

AMP Research PowerStep 76136-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75314-01a Bedienungsanleitung

AMP Research

AMP Research PowerStep 76263-01A Bedienungsanleitung

AMP Research

AMP Research BedStep 75324-01A Bedienungsanleitung

AMP Research

AMP Research BedStep AMP 75312-01a Bedienungsanleitung

AMP Research

AMP Research BedStep 75329-01A Bedienungsanleitung

AMP Research

AMP Research Power Step 77137-01A Bedienungsanleitung

AMP Research

AMP Research PowerStep 75122-01A Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung