Amprobe BT-AFT1 Bedienungsanleitung

BT-AFT1 Arc Fault Breaker Tester

Users Manual

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

LIMITED WARRANTY

VÉÇzÜtàâÄtà|ÉÇá4 Your new instrument has been

quality crafted according to quality standards and contains

quality components and workmanship. It has been inspect-

ed for proper operation of all of its functions and tested by

qualified factory technicians according to the

long-established standards of our company.

Your instrument has a limited warranty against defective

materials and/or workmanship for two years from the date of

purchase provided that, in the opinion of the factory, the

instrument has not been tampered with or taken apart.

Should your instrument fail due to defective materials,

and/orworkmanshipduringthistwoyearperiod,anocharge

repair or replacement will be made to the original purchas-

er. Please have your dated bill of sale, which must identify

the instrument model number and serial number and call the

number listed below:

Repair Department

Phone: 954-499-5400 / 800-327-5060

Fax:954-499-5454

Please obtain an RMA number before

returning product for repair.

Outside the U.S.A. the local representative will assist you.

Above limited warranty covers repair and replacement of

instrument only and no other obligation is stated or implied.

AFCI TESTER INSTRUCTIONS

WARNING

Read and understand this material before operating and servicing this

equipment. Failure to understand how to safely operate this tool can result

in accident causing serious injury or death.

WARNING

Electric shock and fire hazard: Contact with live circuits can result in

severe injury or death.

WARNING

he Arc Fault Circuit ester B -AF 1 is designed for use on 120 volt wiring systems using

a standard 15 or 20 amp outlet receptacle. Using this product with any other electrical sys-

tem may damage the product or result in injury or death.

1. Plug the unit into an AFCI protected branch circuit outlet. he AC Voltage LED will illumi-

nate, indicating a live circuit. he unit will then perform an internal test, which takes

approximately two seconds.

2. After approximately two seconds, press and hold the rip button. he Arc LED will flash

during arc simulation, followed by the AC Voltage LED turning off once the AFCI breaker

has tripped.

If the AFCI breaker does not trip, the AC Voltage LED will remain illuminated. he unit is

either plugged into a non-AFCI circuit, the AFCI breaker is defective or there is an error in

the wiring. he unit will not perform a subsequent test until it has been disconnected from

AC voltage and then reconnected.

NOTE: he arc fault circuit breaker tester will automatically reset anytime power is discon-

nected and reconnected for a minimum of one-half second.

All appliances or equipment on the circuit being tested should be unplugged to help avoid

erroneous test.

Not a comprehensive diagnostic instrument but a simple instrument to indicate that the

receptacle is protected by an AFCI.

Refer all indicated problems to a qualified electrician.

Will not indicate quality of ground.

Will not detect two hot wires in a circuit.

Will not detect a combination of defects.

Will not detect reversal of grounded and grounding conductors.

Consult the AFCI manufacturer’s installation instructions to determine that the AFCI is

installed in accordance with the manufacturer’s specifications.

Check for correct wiring of receptacle and all remotely connected receptacles on the

branch circuit.

Operate the test button on the AFCI installed in the circuit. he AFCI must trip. If it does

not - do not use the circuit - consult an electrician. If the AFCI does trip, reset the AFCI.

hen, insert the AFCI tester into the receptacle to be tested.

Activate the test button on the AFCI tester for a minimum of 6 seconds when testing the

AFCI condition. A visible indication on the AFCI tester must cease when tripped.

If the tester fails to trip the AFCI, it suggests a) a wiring problem with a totally operable

AFCI or b) proper wiring with a faulty AFCI. Consult an electrician to check the condition of

the wiring and AFCI.

Specifications

Operating Voltage: 120VAC, 60 Hz, 15/20 Amp

est load: Draws up to eight 120 amp pulses

within a one half second period.

Operating emperature: 0º F - 120º F

Warranty: wo year factory repair or replacement.

Size: 4.75” x 2.75” x 1.00”.

Back to the Amprobe BTAFT1 page

Visit us at www.TestEquipmentDepot.com

Inhaltsverzeichnis

Andere Amprobe Messgerät Handbücher

Amprobe

Amprobe ACF3000 AK Bedienungsanleitung

Amprobe

Amprobe AC50A Bedienungsanleitung

Amprobe

Amprobe ECB50A Bedienungsanleitung

Amprobe

Amprobe WT-60 Bedienungsanleitung

Amprobe

Amprobe MO-100 Bedienungsanleitung

Amprobe

Amprobe LCR55A Bedienungsanleitung

Amprobe

Amprobe MAN02-A Bedienungsanleitung

Amprobe

Amprobe VPC-20 Bedienungsanleitung

Amprobe

Amprobe WT-30 Bedienungsanleitung

Amprobe

Amprobe UDM45 Bedienungsanleitung

Amprobe

Amprobe TIC 300 PRO Bedienungsanleitung

Amprobe

Amprobe ACD-3300 IND Bedienungsanleitung

Amprobe

Amprobe MT-10 Bedienungsanleitung

Amprobe

Amprobe 3730217 Bedienungsanleitung

Amprobe

Amprobe UAT-610 Bedienungsanleitung

Amprobe

Amprobe PM55A Bedienungsanleitung

Amprobe

Amprobe CO2-100 Bedienungsanleitung

Amprobe

Amprobe PRM-4 Bedienungsanleitung

Amprobe

Amprobe MAN15 Bedienungsanleitung

Amprobe

Amprobe THWD-5 Bedienungsanleitung

Amprobe

Amprobe SOLAR-100 Bedienungsanleitung

Amprobe

Amprobe ACD-10 PRO Bedienungsanleitung

Amprobe

Amprobe AC40C Bedienungsanleitung

Amprobe

Amprobe ACD-51HP Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung