Amprobe BAT-500 Bedienungsanleitung

Users Manual

• Mode d’emploi

• Bedienungshandbuch

• Manual d’Uso

• Manual de uso

BAT-500

Battery Impedance Tester

BAT-500

Battery Impedance Tester

Users Manual

July 2009, Rev.1

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for 1 year from the

date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident,

neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers

are not authorized to extend any other warranty on Amprobe’s behalf. To obtain service during the

warranty period, return the product with proof of purchase to an authorized Amprobe Test Tools

Service Center or to an Amprobe dealer or distributor. See Repair Section for details. THIS WARRANTY

IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STAUTORY -

INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,

ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.

Since some states or countries do not allow the exclusion or limitation of an implied warranty or of

incidental or consequential damages, this limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration should be accompanied

by the following: your name, company’s name, address, telephone number, and proof of purchase.

Additionally, please include a brief description of the problem or the service requested and include

the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the

form of a check, a money order, credit card with expiration date, or a purchase order made payable to

Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. During the

warranty period any defective test tool can be returned to your Amprobe® Test Tools distributor

for an exchange for the same or like product. Please check the “Where to Buy” section on www.

amprobe.com for a list of distributors near you. Additionally, in the United States and Canada In-

Warranty repair and replacement units can also be sent to a Amprobe® Test Tools Service Center

(see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be sent to a Amprobe® Test Tools

Service Center. Call Amprobe® Test Tools or inquire at your point of purchase for current repair

and replacement rates.

In USA In Canada

Amprobe Test Tools Amprobe Test Tools

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe® Test Tools distributor for a

nominalv charge. Please check the “Where to Buy” section on www.amprobe.com for a list of

distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

*(Correspondence only – no repair or replacement available from this address. European

customers please contact your distributor.)

BAT-500

Battery Impedance Tester

13 14

BAT-500

Battery Impedance Tester

Keys And Input / Output Terminals

1POWER key : Power on / off

2READ key :

1) Press key to show the manual logged readings.

2) Press READ key again to stop reading.

3 MEMORY key :

1) Under the manual logging mode, the tester stores each single set of

logged reading to the memory by pressing MEMORY key.

2) Press and hold MEMORY key for 2 seconds to enter continuous

logging mode. Press again to stop logging.

4V-RANGE key : Select the voltage range. (4V, 40V)

5HOLD key :

1) Press HOLD key to freeze or unfreeze the displayed reading.

2) Press and hold HOLD key for 2 seconds to enter the interval time setting

mode for continuous data logging.

6Ω- RANGE key : Select the impedance range. (40mΩ, 400mΩ, 4Ω, 40Ω)

7uREL key :

1) Press ukey to move the cursor to the right.

2) Press REL (Relative) key to zero the reading.

8pkey : Press pkey to increase the displayed value.

9SET key :

1) Press SET key to switch the comparator mode on or off.

2) Press and hold the SET key for 2 seconds to enter the comparator-

setting mode. Press again to store the setting in memory.

10 qkey : Press qkey to decrease the displayed value.

11 tKey :

1) Press tkey to move the cursor to the left.

2) Press key to turn the beeper on or off.

12 RS-232 connector : PC interface connector.

13 – Input jack : For connecting with the black test lead plug.

14 + Input jack : For connecting with the red test lead plug.

BAT-500

Battery Impedance Tester

Display

1The reading of the measured impedance (High or Low limit of impedance

on the comparator settings)

2The reading of the measured voltage (High or Low limit of voltage on the

comparator settings)

3The assigned number of comparator : 99 sets

4The location for the manual logged data

mΩThe unit of impedance VThe unit of voltage

HOLD Hold function Low-Battery Mark

The symbol of beeper COMP.SET Comparator settings

COMP The symbol will appear when the comparator function is ON

DATA The symbol will appear when the meter start manual

datalogging function or reading the manual logged data

DATA Memory symbol for continuous datalogging function. The

symbol will ﬂash when each data is stored to the memory.

INTV Interval time settings of continuous datalogging function.

(1~255 seconds)

HIGH High limit setting of the comparator impedance & voltage

LOW Low limit setting of the comparator impedance

2 3

BAT-500

Battery Impedance Tester

LEDS Display

PASS

(Green LED)

To indicate the tested battery complies with the high limit

of comparator.

WARNING

(Yellow LED) To indicate that the tested battery is going to deteriorate.

FAIL

(Red LED) To indicate that the tested battery has deteriorated.

These indications will appear when the High and Low comparator limits for

internal impedance and the comparator threshold value for voltage are all set.

BAT-500

Battery Impedance Tester

CONTENTS

SYMBOLS...............................................................................................................2

UNPACKING AND INSPECTION .............................................................................2

INTRODUCTION .....................................................................................................3

OPERATION............................................................................................................3

Preparation........................................................................................................3

Operation ..........................................................................................................4

Zero Adjust (REL)...............................................................................................5

Using Comparator function (99 sets) ...............................................................5

Comparator Settings.........................................................................................5

Comparator Tables............................................................................................6

Start / Stop Controls the Comparator ..............................................................6

Start / stop data logging...................................................................................7

SPECIFICATION ......................................................................................................8

General Speciﬁcations ......................................................................................8

Electrical Speciﬁcations.....................................................................................10

MAINTENANCE AND REPAIR ................................................................................11

Battery Check & Replacement..........................................................................11

RS-232 INTERFACE, SOFTWARE INSTALLATION AND OPERATION

RS-232 WIRING HARDWARE.................................................................................12

RS-232 PROTCODE ................................................................................................13

HARDWARE REQUIREMENTS AND SETUP ...........................................................13

SOFTWARE REQUIREMENTS AND SETUP.............................................................14

COMMUNICATING OPERATION ............................................................................16

RECORD..................................................................................................................17

DOWNLOAD ..........................................................................................................18

DATA CONVERT .....................................................................................................19

Apply for Excel ..................................................................................................21

Apply for Graph ................................................................................................21

SAMPLING TIME ....................................................................................................21

SYMBOLS

Caution ! Refer to the

explanation in this Manual Complies with European

Directives

Conforms to relevant

Australian standards. Do not dispose of this

product as unsorted

municipal waste



WARNING!

Do not operate the meter in explosive gas (material), combustible gas

(material) steam or ﬁlled with dust.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 pcs Battery Impedance Tester

6 pcs AA Size 1.5V Batteries

1 set Test Leads

1 pcs Software CD

1 pcs RS-232 Cable

1 pcs Carrying Case

1 pcs Users Manual

If any of the items are damaged or missing, return the complete package to

the place of purchase for an exchange.

INTRODUCTION

• The Battery Tester is designed for measuring the internal impedance

and open-circuit voltage of the secondary battery including Nickel-metal

hydride battery (NiMH), Nickel-cadmium battery (NiCd), Lithium-ion

battery (Li-ion), Alkaline battery and Lead-Acid battery.

• AC four-terminal method to measure the internal impedance by

eliminating lead impedance and contact impedance to get the accurate

results.

• Dual display to show the internal impedance and voltage of the battery

simultaneously.

• It has 99 sets of composite comparator function, which can be set at

impedance and voltage values to get the reliable detection of battery

deterioration.

• Pin type leads, which can easily contact the battery electrodes supplied

as standard to get more accurate 4-terminal measurement.

OPERATION

Preparation

The following safety information must be observed to ensure maximum

personal safety during the operation of this tester.

• To avoid electric shock when replacing the batteries rst disconnect the

leads from the object to be measured.

• When replacing the batteries, do not install old batteries with new ones

and do not mix different types of batteries.

• Check the battery polarity carefully when inserting the batteries.

• Do not short-circuit used batteries, disassemble them, or throw them in a

ﬁre. Doing so may cause the batteries to explode.

• Be sure to dispose of used batteries properly.

1. Remove the battery cover.

2. Insert the batteries into the battery compartment.

Inhaltsverzeichnis

Andere Amprobe Prüfgeräte Handbücher

Amprobe

Amprobe Telaris Series Bedienungsanleitung

Amprobe

Amprobe PRM-6 Bedienungsanleitung

Amprobe

Amprobe AMP-25 Handbuch

Amprobe

Amprobe LT-10-EUR Bedienungsanleitung

Amprobe

Amprobe PY-1A Bedienungsanleitung

Amprobe

Amprobe SM-CAL1 Bedienungsanleitung

Amprobe

Amprobe AMB-25 Bedienungsanleitung

Amprobe

Amprobe gp-2a Bedienungsanleitung

Amprobe

Amprobe MEGATEST 5000 Bedienungsanleitung

Amprobe

Amprobe ST-102B Bedienungsanleitung

Amprobe

Amprobe LAN-1 Bedienungsanleitung

Amprobe

Amprobe PRM-2 Bedienungsanleitung

Amprobe

Amprobe BAT-200 Bedienungsanleitung

Amprobe

Amprobe UAT-505 Bedienungsanleitung

Amprobe

Amprobe LT-10 Bedienungsanleitung

Amprobe

Amprobe BT-120 Bedienungsanleitung

Amprobe

Amprobe ST-101B Originalbetriebsanleitung

Amprobe

Amprobe BT-120 Bedienungsanleitung

Amprobe

Amprobe VPC-10 Bedienungsanleitung

Amprobe

Amprobe 3503229 Bedienungsanleitung

Amprobe

Amprobe AT-2004-A Bedienungsanleitung

Amprobe

Amprobe GP-2 GeoTest Bedienungsanleitung

Amprobe

Amprobe ACD-14 TRMS-PLUS Bedienungsanleitung

Amprobe

Amprobe DGC-1000A Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung