Amprobe INSP-3 Bedienungsanleitung

Users Manual

INSP-3

Wiring Inspection

Tester

For detailed specifications and ordering info go to www.TestEquipmentDepot.com

INSP-3

Wiring Inspection Tester

Users Manual

December 2009, Rev.1

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material

and workmanship for 1 year from the date of purchase. This

warranty does not cover fuses, disposable batteries or damage

from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are

not authorized to extend any other warranty on Amprobe’s

behalf. To obtain service during the warranty period, return the

product with proof of purchase to an authorized Amprobe Test

Tools Service Center or to an Amprobe dealer or distributor.

See Repair Section for details. THIS WARRANTY IS YOUR ONLY

REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS,

IMPLIED OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,

ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT

BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY

CAUSE OR THEORY. Since some states or countries do not

allow the exclusion or limitation of an implied warranty or of

incidental or consequential damages, this limitation of liability

may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof

of purchase. Additionally, please include a brief description of

the problem or the service requested and include the test leads

with the meter. Non-warranty repair or replacement charges

should be remitted in the form of a check, a money order,

credit card with expiration date, or a purchase order made

payable to Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery

before requesting repair. During the warranty period any

defective test tool can be returned to your Amprobe® Test

Tools distributor for an exchange for the same or like product.

States and Canada In-Warranty repair and replacement units

can also be sent to a Amprobe® Test Tools Service Center (see

address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada

should be sent to a Amprobe® Test Tools Service Center. Call

Amprobe® Test Tools or inquire at your point of purchase for

current repair and replacement rates.

1) Power Cord Receptacle

2) Power/Select Push button

3) GFCI Test Push button

4) AFCI Test Push button

5) Battery Compartment

6) LCD Display

7) 20A load LED indicator

8) 20A load push button

selector

9) 15A load LED indicator

10) 15A load push button

selector

11) 10A load push button

selector

12) 10A load LED indicator

INSP-3 Wiring Inspection Tester

CONTENTS

SYMBOLS........................................................................ 2

UNPACKING AND INSPECTION ..................................... 4

INTRODUCTION .............................................................. 4

Features ...................................................................... 4

OPERATION..................................................................... 6

Main Screen (Refer to Fig.2) ..................................... 6

Secondary Screen (Refer to Fig.3) ............................ 7

What the Readings Mean ......................................... 8

SPECIFICATION ............................................................. 11

MAINTENANCE AND REPAIR ....................................... 11

Battery Replacement .............................................. 12

SYMBOLS

Battery �Refer to the

manual

Double Insulated Dangerous Voltage

Alternating Current Earth Ground

Direct Current Fuse

�

Application around

and removal

from hazardous

live conductors is

permitted

Complies with EU

directives

Do not dispose

of this product as

unsorted municipal

waste



Conform to

relevant Australian

standards



Underwriters

Laboratories.[Note:

Canadian and US.]

Audible tone

Safety Information

•The INSP-3 wiring inspection Tester is conformed

to EN61010-1:2001; CAT II 120 V, class II and

pollution deg.2

•Do not exceed the maximum overload limits

(see speciﬁcations) nor the limits marked on the

instrument itself. Never apply more than 120

VAC rms between the adaptor prongs of the

wiring inspection tester.

�WARNING and PRECAUTIONS

•Before and after hazardous voltage

measurements, test the voltage function on a

known source such as line voltage to determine

proper meter functioning.

•Inspect the INSP-3 wiring inspection tester before

every use. Do not use any damaged part.

•Never ground yourself when taking

measurements. Do not touch exposed circuit

elements or test probe tips.

•Do not operate the instrument in an explosive

atmosphere.

•To reduce the risk of ﬁre or electric shock, do not

expose this product to rain or moisture.

•The meter is intended only for indoor use. To

avoid electrical shock hazard, observe the proper

safety precautions when working with voltages

above 60 VDC, 42.4 Vpk, or 30 VAC rms. These

voltage levels pose a potential shock hazard to

the user.

•Before and after hazardous voltage

measurements, test the voltage function on a

known source such as line voltage to determine

proper meter functioning.

•Keep your hands/ﬁngers behind the hand/ﬁnger

barriers (of the meter and the power cord) that

indicate the limits of safe access of the hand-held

part during measurement.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 INSP-3 Wiring Inspection Tester

1 Power Cord

1 9V Alkaline Battery (Installed)

1 Users Manual

1 Carrying Case

If any of the items are damaged or missing, return

the complete package to the place of purchase for an

exchange.

INTRODUCTION

The INSP-3, wiring inspector is a rugged tester

designed to verify building wiring compliance to

electrical code, especially voltage drop under load.

Identify issues with splices, connections and conductor

quality, crucial to safety and performance of the

electrical system.

Features

• Testingefciency-relevanttestdata(voltage,

voltage drop, hot and neutral voltage drop,

voltage with load, ground impedance) is

presented on a single large display to save

operator time - no scrolling or switching screens

needed

• Veriesifwiringistestedforload

carrying ability that meets electrical code

recommendations for voltage drop under load

• Meterdetectsfaultywiringinneedofrepair

without removing outlets cover plates, or panel

covers:

• Faultysplicesandconnections

• Incorrectwiring

• Undersizedwiring

• FaultyGFCIs,

• FaultyorincorrectlywiredAFCIs

• Incorrectlinevoltage

• Poorgroundquality

• Userselectable10,15and20ampsloadstoverify

performance of the electrical system

• Incorrectwiringorvoltagedroptestfailureis

clearly indicated by ﬂashing screen

• Willnottripcircuitbreakersorblowfuses

during the test

• TestsGFCIandAFCIoperations

• Checkgroundqualityforsafetyandabilityto

support sensitive electronic equipment

• Measurefaultcurrents

• Savemoneyandtimebyeliminatingguesswork.

NOTE: The Inspector™ 3 does not check the

condition of wiring insulation.

Andere Handbücher für INSP-3

Inhaltsverzeichnis

Andere Amprobe Prüfgeräte Handbücher

Amprobe

Amprobe BAT-250 Bedienungsanleitung

Amprobe

Amprobe AMB-50 Bedienungsanleitung

Amprobe

Amprobe UAT-505 Bedienungsanleitung

Amprobe

Amprobe SM-CAL1 Bedienungsanleitung

Amprobe

Amprobe MEGATEST 5000 Bedienungsanleitung

Amprobe

Amprobe RS-3 PRO CAT IV Analog Bedienungsanleitung

Amprobe

Amprobe LT-10-EUR Bedienungsanleitung

Amprobe

Amprobe AMB-45 Bedienungsanleitung

Amprobe

Amprobe LAN-1 Bedienungsanleitung

Amprobe

Amprobe DMIII Bedienungsanleitung

Amprobe

Amprobe BAT-200 Bedienungsanleitung

Amprobe

Amprobe gp-2a Bedienungsanleitung

Amprobe

Amprobe PRM-6 Bedienungsanleitung

Amprobe

Amprobe BAT-500 Bedienungsanleitung

Amprobe

Amprobe CT235A Bedienungsanleitung

Amprobe

Amprobe CT238A Bedienungsanleitung

Amprobe

Amprobe A-5000 Bedienungsanleitung

Amprobe

Amprobe PRM-2 Bedienungsanleitung

Amprobe

Amprobe AM-42 Bedienungsanleitung

Amprobe

Amprobe VP-700-E Bedienungsanleitung

Amprobe

Amprobe ROBIN KMP7010 Bedienungsanleitung

Amprobe

Amprobe LT-10 Bedienungsanleitung

Amprobe

Amprobe ST-101B Originalbetriebsanleitung

Amprobe

Amprobe VPC-30 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung