Anritsu MS2830A Bedienungsanleitung

Document No.: M-W3335AE-18.0

ANRITSU CORPORATION

●

For safety and warning information, please read this

manual before attempting to use the equipment.

●

Additional safety and warning information is provided

within the MS2830A Signal Analyzer Operation Manual

(Mainframe Operation), MS2840A Signal Analyzer

Operation Manual (Mainframe Operation), or MS2850A

Signal Analyzer Operation Manual (Mainframe

Operation). Please also refer to this document before

using the equipment.

●

Keep this manual with the equipment.

MS2830A/MS2840A/MS2850A

Signal Analyzer

Operation Manual

Signal Analyzer Function

Operation

18th Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following

safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of the

symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu equipment.

In addition, there may be other labels attached to products that are not shown in the diagrams in this manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is indicated

symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2830A/MS2840A/MS2850A

Signal Analyzer

Operation Manual Signal Analyzer Function Operation

15 December 2009(First Edition)

28 April 2017(18th Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re

export from your

country.

Before re

exporting the product or manuals, please contact us to confirm

whet

her they are export-controlled items or not.

When you dispose of export

-contr

olled items, the products/manuals need to

be broken/shredded so as not to be unlawfully used for military purpose.

Cautions against computer virus infection

●

Copying files and data

Only files that have been provided directly from Anritsu or generated

using Anritsu equipment should be copied to the instrument.

All other required files should be transferred by means of USB or

CompactFlash media after undergoing a thorough virus check.

●

Adding software

Do not download or install software that has not been specifically

recommended or licensed by Anritsu.

●

Network connections

Ensure that the network has sufficient anti-

virus security protection in

place.

About This Manual

Operation manual configuration

The operation manual configuration of the MS2830A/MS2840A, and

MS2850A Signal Analyzer is shown below.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Remote Control)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(SignalAnalyzer Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Signal Analyzer Function Remote Control)

MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual

(SignalAnalyzer Function Operation)

MS2690A/MS2691A/MS2692A

Spectrum Analyzer Operation Manual

(SpectrumAnalyzer Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote Control)

MS2830A/MS2840A/MS2850A

Spectrum Analyzer Operation Manual

(SpectrumAnalyzer Function Operation)

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual

(Main Frame Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2840A SignalAnalyzer Operation Manual (Main Frame Operation)

MS2830A SignalAnalyzer Operation Manual (Main Frame Operation)

MS2850A SignalAnalyzer Operation Manual (Main Frame Operation)

•Signal Analyzer Operation Manual (Mainframe Operation)

•Signal Analyzer Operation Manual (Mainframe Remote Control)

Description of basic operations, maintenance procedures, common

functions and common remote functions of the mainframe

•Signal Analyzer Operation Manual (Signal Analyzer Function Operation)

•Signal Analyzer Operation Manual (Signal Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

signal analyzer

•Signal Analyzer Operation Manual (Spectrum Analyzer Function

Operation)

•Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

spectrum analyzer

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Operation)

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Remote Control)

Description of basic operations, functions and remote functions of the

phase noise measurement function.

Convention Used in This Manual

Throughout this document, the use of MS2830A is assumed unless

otherwise specified. If using MS2840A, MS2850A, change MS2830A to

read MS2840A, MS2850A.

In this document, indicates a panel key.

III

Appendix Index

Table of Contents

About This Manual................................................. I

Overview...........................................1-1

Chapter 1

1.1 Overview of Signal Analyzer.........................................1-2

1.2 Features of Signal Analyzer..........................................1-3

Basic Operation................................2-1

Chapter 2

2.1 Display Description.......................................................2-2

2.2 Setting Frequency.........................................................2-3

2.3 Setting Level...............................................................2-21

2.4 Setting IQ Data Capture Time Range.........................2-37

Selecting WaveformChapter 3 Capture Method................................3-1

3.1 Single/Continuous Measurement..................................3-2

3.2 Trigger Function............................................................3-3

Trace .................................................4-1

Chapter 4

4.1 Selecting Trace.............................................................4-3

4.2 Spectrum.......................................................................4-4

4.3 Power vs Time............................................................4-65

4.4 Frequency vs Time ...................................................4-104

4.5 Phase vs Time..........................................................4-137

4.6 CCDF........................................................................4-156

4.7 Spectrogram .............................................................4-176

4.8 No Trace...................................................................4-196

4.9 Sub-Trace.................................................................4-203

Digitize Function..............................5-1

Chapter 5

5.1 Saving IQ Data..............................................................5-2

5.2 Replay Function............................................................5-9

5.3 Playback Function ......................................................5-17

IV.

System Setting.................................6-1

Chapter 6

6.1 Setting System..............................................................6-2

6.2 Erasing Warm up Message ..........................................6-3

6.3 Setting Title...................................................................6-4

6.4 Adjusting Internal Reference Clock Signal ...................6-5

6.5 Input Source for Reference Clock Signal .....................6-6

6.6 Pre-Amp On/Off Display...............................................6-7

6.7 Selecting Preselector....................................................6-8

External Mixer...................................7-1

Chapter 7

7.1 External Mixer Overview...............................................7-2

7.2 External Mixer...............................................................7-3

7.3 Connecting External Mixer............................................7-6

7.4 Setting Band of External Mixer.....................................7-7

7.5 Setting External Mixer Bias...........................................7-9

7.6 Setting Conversion Loss of External Mixer.................7-10

Appendix A Error Message.............................. A-1

Appendix B Default Value List......................... B-1

Appendix C Standard Parameter List............. C-1

Appendix D FFT and RBW............................... D-1

Appendix E IQ Data Time Actually Required ..E-1

Appendix F Saving Waveform CSV DATA.......F-1

Index ..................................................Index-1

1-1

Overview

Chapter 1

This chapter describes an overview of the Signal Analyzer function.

1.1 Overview of Signal Analyzer.........................................1-2

1.2 Features of Signal Analyzer..........................................1-3

Chapter 1 Overview

1-2

1.1 Overview of Signal Analyzer

The MS2830A, MS2840A, and MS2850A Signal Analyzer is a spectrum

analyzer to which options such as real-time signal analysis and vector

modulation analysis can be added.

The signal analyzer application (hereinafter “this application”) enables

high-speed and high-accuracy signal processing of wide-ranging analyses

at full-span, a characteristic of conventional sweep-type spectrum

analyzers, using a digital IF block. In addition, the FFT process

(high-speed Fourier conversion) realizes high-speed spectrum analysis

and simultaneous analysis on frequency and time axes not possible with

conventional sweep-type spectrum analyzers. Also, added option enables

recording of the RF input signal as digital data (digitize function). It can

be used in a variety of applications from research and development to

manufacturing thanks to its characteristics.

The Signal Analyzer function has the following features:

•Broad frequency band

MS2830A: 3.6 GHz/6 GHz/13.5 GHz/26.5 GHz/43 GHz

MS2840A: 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz

MS2850A: 32 GHz/44.5 GHz

•Broad analysis bandwidth

MS2830A-006/106 10 MHz

MS2830A-005/105/007/009/109 31.25 MHz

MS2830A-077 62.5 MHz

MS2830A-078 125 MHz

MS2840A-006/106 10 MHz

MS2840A-005/105/009/109 31.25 MHz

MS2840A-077/177 62.5 MHz

MS2840A-078/178 125 MHz

MS2850A-032 255 MHz

MS2850A-033/133 510 MHz

MS2850A-034/134 1 MHz

•High dynamic range

•High-speed measurement

•High-speed, high-accuracy signal analysis using digital IF

•Enables time-continuous analysis of loaded data

•Large-capacity waveform memory and digitization function that

records RF signals without missing.

MS2830A-005/105/006/106/007/009/109/077/078

MS2840A-005/105/006/106/009/109/077/177/078/178

MS2850A-032/033/133/034/134

•Wide variety of measurement functions

Andere Handbücher für MS2830A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Anritsu Messgerät Handbücher

Anritsu

Anritsu Site Master S120A Bedienungsanleitung

Anritsu

Anritsu AM-9000 Series Bedienungsanleitung

Anritsu

Anritsu ShockLine MS46121A Series Bedienungsanleitung

Anritsu

Anritsu MS2722C Bedienungsanleitung

Anritsu

Anritsu VectorStar ME7838AX Bedienungsanleitung

Anritsu

Anritsu MP1632C Bedienungsanleitung

Anritsu

Anritsu MS2690A Bedienungsanleitung

Anritsu

Anritsu MS9740A Bedienungsanleitung

Anritsu

Anritsu MS2830A Bedienungsanleitung

Anritsu

Anritsu CMA 5000 - UTA Bedienungsanleitung

Anritsu

Anritsu FieldMaster MS2080A Bedienungsanleitung

Anritsu

Anritsu Site Master S331D Betriebsanleitung

Anritsu

Anritsu Network Master MT9090A Series Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu VectorStar ME7838E4X Bedienungsanleitung

Anritsu

Anritsu MS2711A Bedienungsanleitung

Anritsu

Anritsu ShockLine Series Bedienungsanleitung

Anritsu

Anritsu MS2665C Bedienungsanleitung

Anritsu

Anritsu BTS Master MT8221B Bedienungsanleitung

Anritsu

Anritsu MS2720 A Series Bedienungsanleitung

Anritsu

Anritsu MS2681A Bedienungsanleitung

Anritsu

Anritsu BTS Master Bedienungsanleitung

Anritsu

Anritsu MS2070A Bedienungsanleitung

Anritsu

Anritsu MP1220A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung