Anritsu MT1000A Network Master Pro Bedienungsanleitung

Document No.: M-W3811AE-4.0

Quick Reference Guide

MT1000A

Network Master Pro

OTDR Modules

Fourth Edition

Power button

Touch Screen display

Battery

• Additional safety and warning information is

provided within the “MT1000A Network Master Pro

OTDR Modules” Operation Manual.

• Please refer to that document before using the

equipment.

• Keep this manual with the equipment.

Contents

Panel.................................................................................. 1

Power................................................................................. 2

To Power Up............................................................................... 2

To Power Down .......................................................................... 3

Forced Power Down................................................................... 3

Toolbars ............................................................................. 4

Basic Screens and Navigation ........................................... 4

Standard OTDR (Optical Time Domain Reflectometer)

........... 6

Measurement condition setup .................................................... 6

Test setup................................................................................... 8

Measurement ........................................................................... 10

Fiber Visualizer ........................................................................ 11

Trace ........................................................................................ 13

FTTA (Fiber to the Antenna) ............................................. 17

Construction..................................................................... 18

OLTS (Optical Loss Test Set) ........................................... 21

File saving and loading .................................................... 27

Saving the file........................................................................... 27

Loading the file......................................................................... 27

Creating the report ........................................................... 29

Copying a file ................................................................... 31

prior written permission of the publisher.

The contents of this manual may be changed without prior notice.

Panel

MU100021A panel is shown below. MU100020A and MU100022A do not

have the OTDR/OLS (0.85/1.3 m) connector.

*: OTDR/OLS (1.31/1.55/1.625 m) is printed on MU100022A.

VFL: Visual Fault Locator (Option 002)

Visible red light is output.

OPM: Optical Power Meter

Input port for the power measurement. 1.25 mmor

2.5mmferrule can be connected by using the supplied

Universal Connectors.

Universal Connector

OTDR/OLS: Optical Time Domain Reflectometer / Optical Light Source

Port for the OTDR measurement and light source output.

SMF (Single mode fiber) OTDR/OLS connector depends on the

option:

•Option 010: UPC Connector

•Option 011: APC Connector

Power

Power button indication shows the following status.

Gray: Power off

Orange flashing (fast): Booting on AC power

Green flashing: Booting on battery

Orange flashing (slow): Charging

Orange: Stand by

Green: Operating

To Power Up

AC Operation

Connect the AC adaptor to the Network Master. The power button

flashes in orange during booting and remains on after booting.

Press the power button to light it up in green. After a model name is

displayed, the Network Master enters Operating status and the

Application Selector appears.

Figure 1 Application Selector

Battery Operation

Press the power button. The Network Master shows a model name and

flashes the power button in green during booting.

Then, the Network Master enters Operating status and shows the

Application Selector.

To Power Down

When you press the Power button, a pop-up menu containing Shut Down

will appear.

Touch Shut Down and then confirm by touching Yes in a dialog box.

AC Operation

After you shut the Network Master down, the Network Master stays

Stand by or charging state until you disconnect the AC adapter.

Battery Operation

After you shut the Network Master down, the power goes off.

Forced Power Down

If it is not possible to power down the Network Master using the power

button menu, the following procedure can be used to make an emergency

power down.

1. Disconnect AC adapter if it is connected.

2. Hold the Power button depressed for a couple of seconds.

Toolbars

General functionalities such as start/stop of test, creation of the report,

displaying the help etc. are placed in expandable toolbars.

Application toolbar Instrument toolbar

Start Averaging Instrument information

Stop the measurement Network setting and

General settings (ex.

Date, Language)

Start Realtime*1

Skip a measurement*2File manager

Accept the result*2Displays Help

Create a report Resource monitoring

Displays Help

Save a file

Load a file

Close the application

*1: Appears on Standard OTDR and FTTA application.

*2: Appears on Construction application.

Basic Screens and Navigation

You can navigate freely both horizontally and vertically between the

various screens, as shown in the figure in next page. Set the

measurement conditions on the Setup screen, and configure the test

setups on the Test screen. Touching the Start Averaging or Start Realtime

on the Application toolbar will display the Result screen.

Application Selector screen Result Files Browser screen

Setup screen Test screen Result screen

”Navigation

area”

Standard OTDR (Optical Time Domain Reflectometer)

To locate where the reflection happens, and measure the

fiber loss, touch Standard OTDR in the Application selector.

Measurement condition setup

1. To display the Setup screen, touch SETUP at the bottom of the

screen.

2. For MU100021A, touch Port in the navigation area.

Set Output Port to Single Mode or Multi Mode.

3. Touch Measurement in the navigation area.

If selecting Auto, the parameters will be set automatically.

Selecting Manual allows user to set parameters.

Select Wavelength used for the measurement.

4. Touch IOR/BSC. Set IOR, BSC, and Fiber Type.

5. Touch Header. Set each items if you need. These items are saved to

the file. The following items will be printed on the report:

Cable ID, Fiber ID, Location A, Location B, and Operator.

6. Touch Preference. Set each item if you need.

Connection Check: If selecting the check box, confirms whether or

not the fiber is connected correctly to the OTDR measurement port.

Active Fiber Check: If selecting the check box, performs a "live

fiber" check on the currently attached fiber under test to detect

whether the fiber is carrying traffic before firing any OTDR laser

sources.

Note:

The Active Fiber Check feature does not apply for the 850/1300

nm multimode fiber.

Test setup

1. To display the Test screen, touch TEST at the bottom of the screen.

2. Touch Fiber in the navigation area. Set the length of the patch code

connecting to the fiber under the test. If Output port is set to Single

Mode, set the splitter configuration.

Andere Handbücher für MT1000A Network Master Pro

Inhaltsverzeichnis

Andere Anritsu Prüfgeräte Handbücher

Anritsu

Anritsu MD8470A Bedienungsanleitung

Anritsu

Anritsu VectorStar MN469 C Series Bedienungsanleitung

Anritsu

Anritsu VectorStar MN4690B Series Bedienungsanleitung

Anritsu

Anritsu Network Master Series Bedienungsanleitung

Anritsu

Anritsu MG3681A Bedienungsanleitung

Anritsu

Anritsu MN469xC Series Bedienungsanleitung

Anritsu

Anritsu MT9812B Bedienungsanleitung

Anritsu

Anritsu Precision AutoCal 36585 Series Bedienungsanleitung

Anritsu

Anritsu Site Master S113B Bedienungsanleitung

Anritsu

Anritsu MT8860C Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MP8931A Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MS9720A Bedienungsanleitung

Anritsu

Anritsu CMA50 Bedienungsanleitung

Anritsu

Anritsu MT9810A Bedienungsanleitung

Anritsu

Anritsu MG369 A Series Bedienungsanleitung

Anritsu

Anritsu MD1230B-26 Bedienungsanleitung

Anritsu

Anritsu 3659 Bedienungsanleitung

Anritsu

Anritsu ML8720B Bedienungsanleitung

Anritsu

Anritsu 693 B Series Bedienungsanleitung

Anritsu

Anritsu MP1590B Bedienungsanleitung

Anritsu

Anritsu MT8850A Bedienungsanleitung

Anritsu

Anritsu MT8852B Betriebsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung