Anritsu MP1801A Bedienungsanleitung

Document No.: M-W1961BE-1.0

Measurement Solutions

ANRITSU CORPORATION

MP1801A

43.5G MUX

Service Manual

First Edition

To ensure that this equipment is used safely, impor-

tant safety items are also explained in the MP1801A

43.5G MUX Operation Manual.

This manual explains important service items relat-

ed to service.

Read both the operation manual and this manual,

and keep both with the equipment.

iiii

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following

safety symbols to indicate safety-related information. Insure that you clearly understand the meanings of the sym-

bols BEFORE using the equipment. Some or all of the following five symbols may not be used on all Anritsu

equipment. In addition, there may be other labels attached to products which are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Insure that you clearly understand the meanings of the symbols

and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated sym-

bolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is indi-

cated symbolically in or near the circle.

This indicates warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MP1801A

43.5G MUX

Service Manual

10 May 2002 (First Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

For Safety

iii

iiiiii

iii

WARNING

1. ALWAYS refer to the operation manual when working near locations

at which the alert mark shown on the left is attached. If the opera-

tion, etc., is performed without heeding the advice in the operation

manual, there is a risk of personal injury. In addition, the equipment

performance may be reduced.

Moreover, this alert mark is sometimes used with other marks and

descriptions indicating other dangers.

2. When supplying power to this equipment, connect the accessory 3-

pin power cord to a grounded outlet. If a grounded outlet is not

available, before supplying power to the equipment, use a conversion

adapter and ground the green wire, or connect the frame ground on

the rear panel of the equipment to ground. If power is supplied

without grounding the equipment, there is a risk of receiving a severe

or fatal electric shock.

3. This equipment cannot be repaired by the user. DO NOT attempt to

open the cabinet or to disassemble internal parts. Only Anritsu-

trained service personnel or staff from your sales representative with

a knowledge of electrical fire and shock hazards should service this

equipment. There are high-voltage parts in this equipment present-

ing a risk of severe injury or fatal electric shock to untrained person-

nel. In addition, there is a risk of damage to precision parts.

4. This equipment should be used in the correct position. If the cabinet

is turned on its side, etc., it will be unstable and may be damaged if it

falls over as a result of receiving a slight mechanical shock.

Repair

Falling Over

For Safety

iviv

CAUTION

1. Before changing the fuses, ALWAYS remove the power cord from the

poweroutlet and replace the blown fuses. ALWAYS use new fuses

of the type and rating specified on the fuse marking on the rear panel

of the cabinet.

T3.15A indicates a time-lag fuse.

T3.15A indicate a normal fusing type fuse.

There is risk of receiving a fatal electric shock if the fuses are re-

placed with the power cord connected.

2. Keep the power supply and cooling fan free of dust.

•Clean the power inlet regularly. If dust accumulates around the

power pins, there is a risk of fire.

•Keep the cooling fan clean so that the ventilation holes are not ob-

structed. If the ventilation is obstructed, the cabinet may over-

heat and catch fire.

3. NEVER input a signal of more than the specified maximum power

between the measured terminal and ground. Input of an excessive

signal may damage the equipment.

Changing Fuse

Cleaning

Check Terminal

Equipment Certificate

Anritsu Corporation certifies that this equipment was tested before

shipment using calibrated measuring instruments with direct traceability

to public testing organizations recognized by national research laborato-

ries including the Electrotechnical Laboratory, the National Research

Laboratory of Metrology and the Communications Research Laboratory,

and was found to meet the published specifications.

Anritsu Warranty

Anritsu Corporation will repair this equipment free-of-charge if a mal-

function occurs within 1 year after shipment due to a manufacturing fault,

provided that this warranty is rendered void under any or all of the fol-

lowing conditions.

•The fault is outside the scope of the warranty conditions described in

the operation manual.

•The fault is due to mishandling, misuse, or unauthorized modification

or repair of the equipment by the customer.

•The fault is due to severe usage clearly exceeding normal usage.

•The fault is due to improper or insufficient maintenance by the cus-

tomer.

•The fault is due to natural disaster including fire, flooding, earthquake,

etc.

•The fault is due to use of non-specified peripheral equipment,

peripheral parts, consumables, etc.

•The fault is due to use of a non-specified power supply or in a non-

specified installation location.

In addition, this warranty is valid only for the original equipment pur-

chaser. It is not transferable if the equipment is resold.

Anritsu Corporation will not accept liability for equipment faults due to

unforeseen and unusual circumstances, nor for faults due to mishandling

by the customer.

Anritsu Corporation Contact

If this equipment develops a fault, contact Anritsu Corporation or its rep-

resentatives at the address in this manual.

vivi

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re-export from your

country.

Before re-exporting the product or manuals, please contact us to confirm

whether they are export-controlled items or not.

When you dispose of export-controlled items, the products/manuals are

needed to be broken/shredded so as not to be unlawfully used for military

purpose.

Disposing of Product

This equipment uses chemical compound semiconductors including

arsenide, and a lithium battery. At the end of its life, the equipment

should be recycled or disposed properly according to the local disposal

regulations.

vii

viivii

vii

CE Conformity marking

Anritsu affixes the CE Conformity Marking on the following product (s) in

accordance with the Council Directive 93/68/EEC to indicate that they

conform with the EMC and LVD directive of the European Union (EU).

CE Marking

1. Product Model

Model: MP1801A 43.5G MUX

2. Applied Directive

EMC: Council Directive 89/336/EEC

LVD: Council Directive 73/23/EEC

3. Applied Standards

EMC: Emission: EN61326: 1997/A1: 1998 (Class A)

Immunity:EN61326: 1997/A1: 1998 (Annex A)

Performance Criteria*

IEC61000-4-2 (ESD) B

IEC61000-4-3 (EMF) A

IEC61000-4-4 (Burst) B

IEC61000-4-5 (Surge) B

IEC61000-4-6 (CRF) A

IEC61000-4-8 (RPFMF) A

IEC61000-4-11 (V dip/short) B

*: Performance Criteria

A: During testing normal performance within the specifi-

cation limits.

B: During testing, temporary degradation, or loss of func-

tion or which is self-recovering.

Harmonic current emissions:

EN61000-3-2: 1995/A2: 1998 (Class A equipment)

LVD: EN61010-1: 1993/A2: 1995 (Installation Category II, Pol-

lution Degree 2)

viii

viiiviii

viii

C-tick Conformity marking

Anritsu affixes the C-tick marking on the following product (s) in accor-

dance with the regulation to indicate that they conform with the EMC

framework of Australia/New Zealand

C-tick marking

1. Product Model

Model: MP1801A 43.5G MUX

2. Applied Standards

EMC: Emission:

AS/NZS 2064.1/2 (ISM, Group 1, Class A equipment)

ixix

Power Line Fuse Protection

For safety, Anritsu products have either one or two fuses in the AC power

lines as requested by the customer when ordering.

Single fuse: A fuse is inserted in one of the AC power lines.

Double fuse: A fuse is inserted in each of the AC power lines.

Example 1: An example of the single fuse is shown below:

Fuse Holder

Example 2: An example of the double fuse is shown below:

Fuse Holders

Inhaltsverzeichnis

Andere Anritsu Prüfgeräte Handbücher

Anritsu

Anritsu Site Master S113C Bedienungsanleitung

Anritsu

Anritsu AutoCal 36581NNF Bedienungsanleitung

Anritsu

Anritsu MD8470A Technisches Datenblatt

Anritsu

Anritsu MT8852A Bedienungsanleitung

Anritsu

Anritsu 3656B W1 Bedienungsanleitung

Anritsu

Anritsu MX183000A Bedienungsanleitung

Anritsu

Anritsu MG3641A Bedienungsanleitung

Anritsu

Anritsu MP8931A Bedienungsanleitung

Anritsu

Anritsu ML8720B Bedienungsanleitung

Anritsu

Anritsu OSL Series Gebrauchs- und Pflegehandbuch

Anritsu

Anritsu MS9720A Bedienungsanleitung

Anritsu

Anritsu 693 B Series Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu MT9812B Bedienungsanleitung

Anritsu

Anritsu Network Master Series Bedienungsanleitung

Anritsu

Anritsu MX900030A Bedienungsanleitung

Anritsu

Anritsu MG3681A Bedienungsanleitung

Anritsu

Anritsu Site Master S251B Bedienungsanleitung

Anritsu

Anritsu MU150101A Bedienungsanleitung

Anritsu

Anritsu MD1230B-26 Bedienungsanleitung

Anritsu

Anritsu MG3641A Bedienungsanleitung

Anritsu

Anritsu CMA50 Bedienungsanleitung

Anritsu

Anritsu MT8870A Bedienungsanleitung

Anritsu

Anritsu Network master Pro Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung