ANTAIRA IMC-C1000 Series Bedienungsanleitung

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.0

IMC-C1000-XX Series

10/100/1000TX to 1000x Industrial Gigabit Media Converter

with SC/ST Connector

Version 1.1

(July 2018)

User Manual

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

This document contains information which is protected by copyright. Reproduction, adaptation, or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC. Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. All other brand and product names are trademarks or registered trademarks of

their respective owners.

Disclaimer

Antaira Technologies, LLC. provides this manual without warranty of any kind, expressed, or implied including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC. may make improvements and/or changes to the product and/or specifications of the product described in

this manual without prior notice. Antaira Technologies, LLC. will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

iii

FCC Notice

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Media Converters

User Manual

This manual supports the following models:

•IMC-C1000-XX

•IMC-C1000-XX-T

Please check our website (www.antaira.com) for any updated manual or contact us by e-mail

([email protected]).

Antaira Technologies - Industrial Media Converter 
IMC-C1000-XX Series User Manual V1.1 
 
iv 
 
Table of Contents 
 
Overview ............................................................... 5
1 Key Features.................................................. 5
2 Package Contents.......................................... 5
3 Safety Precaution........................................... 6
Hardware Description.......................................... 7
1Physical Dimensions .......................................... 7
2 Front Panel ........................................................ 8
3 Top View............................................................ 8
4 LED Indicators ................................................... 9
5 DIP-Switch Setting........................................... 10
6 Ethernet Ports.................................................. 10
7 Cabling............................................................. 11
8 Wiring the Power Inputs................................... 12
Grounding Note...................................................... 13
Mounting Installation......................................... 14
1 DIN-Rail Mounting............................................ 14
2 Wall Mounting .................................................. 16
Hardware Installation................................................ 18
1 Installation Steps.............................................. 18
2 Maintenance and Service ................................ 19
Network Application ................................................. 20
Trouble Shooting ...................................................... 21
Technical Specifications.......................................... 21
 

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

1.Overview

Antaira Technologies’ IMC-C1000-XX series is a compact IP30 rated gigabit Ethernet-to-Fiber media

converter featuring a 10/100/1000TX Ethernet port and a fixed fiber interface supporting ST and SC

connectors depending on model. There are models that support Multimode and Single-Mode to support

applications with a variety of fiber distances. It is perfectly designed to fulfill industrial applications that

require distance extension and high bandwidth capabilities.

The IMC-C1000-XX series has a built-in “Link Fault Pass Through” (LFP) and “Far End Fault” (FEF)

function with 12~48VDC redundant power inputs with reverse polarity and overload current protection.

This product series supports DIN-rail as well as wall mountable orientations and provides operating

temperature range models in STD: -10°C to 70°C and EOT: -40°C to 80°C

1.1 Key Features

◼System Interface/Performance

•RJ-45 ports support the auto MDI function

•Embedded 1*10/100/1000Tx and 1*1000x fixed fiber port

•Store-and-forward switching architecture

•8k MAC Address Table

•Supports 10kbytes Jumbo Frame

•1Mbits memory buffer

◼Power Input

•DC 12~48V redundant power with a 4-pin removal terminal block

•Max. current 0.18A

•The power input specification is complied with the requirements of SELV (Safety Extra Low

Voltage), and the power supply should be complied with UL 61010-1 & UL 61010-2-201.

◼Operating Temperature

•Standard operating temperature model: -10°C ~ 70°C

•Extended operating temperature model (–T): -40°C ~ 80°C

◼Case/Installation

•IP-30 protection

•Installation in a Pollution Degree 2 industrial environment

•DIN-Rail and wall mount design

1.2 Package Contents

•1 - Quick Installation Guide

•1 - IMC-C1000-XX series Industrial Gigabit Media Converter

•1 - Wall mounting bracket set with screws

•1 - DC cable - 18 AWG & DC jack 5.5x2.1mm

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

1.3 Safety Precaution

Attention

If the DC voltage is supplied by an external circuit, please use a protection device on the

power supply input. Supply by UL Listed industrial use power. The industrial media converter’s

hardware specs, ports, cabling information, and wiring installation will be described within this

user manual.

Warning Labels

The caution label means that you should check the certain information on the user manual

when working with the device. (Shown in Figure 1)

Figure 1: Caution Label

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira Technologies’ IMC-C1000-XX series:

10/100/1000Tx to 1000x compact industrial gigabit Ethernet media converter.

(W x D x H) is 26mm x 95mm x 75mm

Figure 2.1

Physical Dimensions

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

2.2 Front Panel

The front panel of the IMC-C1000-XX series can be seen below (Figure 2.2).

2.3 Top View

Figure 2.3, below, shows the top panel of the IMC-C1000-XX series media converter that is

equipped with one 4-pin removal terminal block connector for dual DC power inputs (12~48VDC).

Figure 2.2

Front Panel

Figure 2.3

Top Panel View

4-Pin Removal Terminal Block (Power Input)

Fiber Port –1000X

Grounding Screw

LED for PWR

DIP Switches for LFP Setting

LED for RJ45 10/100TX Network Speed Status

LED for RJ45 1000TX Network Speed Status

10/100/1000TX RJ45 Port

LED for Fiber Link/Act

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

2.4 LED Indicators

There are LED light indicators located on the front panel of the industrial Ethernet media

converter that displays the power and network status. Each LED indicator has a different color

and has its own specific meaning, see below in Table 2.1.

LED

Color

Description

PWR

Green

Power input 1 or 2 is active

Off

Power input 1 and 2 are inactive

GFX L/A

Green

Connected to network at 1000Mbps

Flashing

Networking is active

Off

Not connected to network

RJ45 Port

(Upper LED)

Green

Linked to network at 1000Mbps

Flashing

Networking is active

Off

Not connected to network

RJ45 Port

(Lower LED)

Green

Linked to network at 10/100Mbps

Flashing

Networking is active

Off

Not connected to network

NOTE: "PWR" is the abbreviation for "Power", "GFX" is for "Gigabit Fixed Fiber port",

and "L/A" is for "Link/Activity".

Table 2.1

LED Indicators

Antaira Technologies - Industrial Media Converter

IMC-C1000-XX Series User Manual V1.1

2.5 DIP-Switch Setting

Default setting:

There are 2 pins on DIP-switch on the front panel for setting LFP (Link Fault Pass)

function, see the Table 2.2 below for more details.

Illustration

DIP-Switch 1

DIP-Switch 2

Function Description

OFF

LFP function Enable

OFF

LFP function Disable

Table 2.2

DIP-switch settings

Caution: If changing the current DIP-switch setting, the device should be powered off

and then powered on again to make the setting effective.

2.6 Ethernet Ports

◼RJ-45 Ports

RJ-45 Ports (Auto MDI/MDIX): The RJ-45 port is auto-sensing for 10/100Base-Tx or 1000Base-

Tx device connections. Auto MDI/MDIX means that the media converter can connect to another

switch or workstation without changing the straight-through or crossover cabling. See the figures

shown below for the straight-through and crossover cabling schematics.

Andere Handbücher für IMC-C1000 Series

Inhaltsverzeichnis

Andere ANTAIRA Medienkonverter Handbücher

ANTAIRA

ANTAIRA FCU-1802Px Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-3102SFP-SFP-DR Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-1802P Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP-bt Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCS-3312WX Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-100SX Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-C100 Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCM-2312WX Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-2805P-SFP Bedienungsanleitung

ANTAIRA

ANTAIRA EMC-0201-WX Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-100A Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-C1000 Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-C1000 Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-280 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-101AG-T Bedienungsanleitung

ANTAIRA

ANTAIRA STF-502C series Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-1000A-SFP Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-6001-SFP+ Bedienungsanleitung

ANTAIRA

ANTAIRA BTS-1000A Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA Optolinx fcu-2805p Bedienungsanleitung

ANTAIRA

ANTAIRA BTS-1000A Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung