ANTAIRA IMP-C1000-SFP-T Bedienungsanleitung

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

IMC-C1000-SFP Series

10/100/1000Tx to 100/1000Fx

Compact Industrial Gigabit Ethernet Media Converter

Version 1.2

User Manual

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC., Microsoft Windows and the Windows logo are

the trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC. is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC. provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC. may make improvements and/or changes to the product and/or specifications of the product described in

this manual, without prior notice. Antaira Technologies, LLC. will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

iii

FCC Notice

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Media Converters

Industrial Grade Unmanaged Ethernet Media Converters

User Manual

Version 1.2 (January 2018)

This manual supports the following models:

 IMC-C1000-SFP

 IMC-C1000-SFP-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

Table of Contents

1. Overview ....................................................................... 1

1.1 Key Features ...................................................... 1

1.2 Package Contents .............................................. 1

1.3 Safety Precaution ............................................... 1

2. Hardware Description ................................................. 2

2.1 Physical Dimensions .......................................... 2

2.2 Front Panel ........................................................ 3

2.3 Top View ............................................................ 3

2.4 LED Indicators ................................................... 4

2.5 DIP-Switch Setting ............................................. 4

2.6 Ethernet Ports .................................................... 5

2.7 Cabling ............................................................... 6

2.8 Wiring the Power Inputs ..................................... 8

3. Mounting Installation .................................................. 9

3.1 DIN-Rail Mounting .............................................. 9

3.2 Wall Mounting .................................................. 11

4. Hardware Installation ................................................ 12

4.1 Installation Steps .............................................. 12

5. Network Application ................................................. 13

6. Trouble Shooting ...................................................... 13

7. Technical Specifications .......................................... 14

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

1. Overview

Antaira Technologies’ IMC-C1000-SFP series is a compact IP30 rated gigabit Ethernet-to-Fiber media

converter featuring a 10/100/1000TX Ethernet port and a dual rate 100/1000 SFP slot. It is perfectly

designed to fulfill industrial applications that require distance extension and high bandwidth capabilities.

This small form factor is ideal for saving space in outdoor applications such as factory automation,

security, ITS transportation, power/utility, water wastewater treatment plants, and any other extreme

ambient weather environments.

The IMC-C1000-SFP series has a built-in “Link Fault Pass Through” (LFP) and “Far End Fault” (FEF)

function with 12~48VDC redundant power inputs with reverse polarity and overload current protection.

This product series supports DIN-rail as well as wall mountable orientations and provides operating

temperature range models in STD: -10°C to 70°C and EOT: -40°C to 80°C.

1.1 Key Features

 System Interface/Performance

 RJ-45 ports support the auto MDI function

 Embedded 1*10/100/1000Tx and 1*100/1000Fx

 Store-and-forward switching architecture

 Power Input

 DC 12~48V redundant power with a 4-pin removal terminal block

 Operating Temperature

 Standard operating temperature model: -10°C ~ 70°C

 Extended operating temperature model (–T): -40°C ~ 80°C

 Case/Installation

 IP30 protection

 DIN-Rail and wall mount design

1.2 Package Contents

 1 – IMC-C1000-SFP series compact industrial media converter

 2 - Wall mounting brackets and screws

1.3 Safety Precaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet media converter’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira Technologies’ IMC-C1000-SFP series:

10/100/1000Tx to 100/1000Fx compact industrial gigabit Ethernet media converter.

(W x D x H) is 26mm x 75mm x 95mm

Figure 2.1

IMC-C1000-SFP Series Physical Dimensions

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

2.2 Front Panel

The front panel of the IMC-C1000-SFP series: 10/100/1000Tx to 100/1000Fx industrial compact

gigabit Ethernet media converter (Figure 2.2).

2.3 Top View

Figure 2.3, below, shows the top panel of the IMC-C1000-SFP series media converter that is

equipped with one 4-pin removal terminal block connector for dual DC power inputs (12~48VDC).

Figure 2.2

Front Panel of the IMC-C1000-SFP Series

Figure 2.3

Top Panel View of IMC-C1000-SFP Series

Grounding screw

4-pin removal terminal block (power input)

LED for PWR

Fiber Port – 100/1000Fx

LED for network fiber connection

Dip switches for LFP setting

LED for RJ45 1000Tx network speed status

10/100/1000Tx RJ45 port

LED for RJ45 10/100Tx network speed status

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

2.4 LED Indicators

There are LED light indicators located on the front panel of the industrial Ethernet media

converter that display the power status and network status. Each LED indicator has a different

color and has its own specific meaning, see below in Table 2.1.

LED Color Description

Power

Green On Power input 1 or 2 is active

Off Power input 1 or 2 is inactive

LINK/ACT

(SFP Slot)

On Connected to network at 100/1000mbps

Green Flashing

Networking is active

Off Not connected to network

RJ45 Port

(Upper LED)

Green

On Linked to network at 1000Mbps

Flashing

Networking is active

Off Not connected to network

RJ45 Port

(Lower LED)

Green

On Linked to network at 10/100Mbps

Flashing

Networking is active

Off Not connected to network

2.5 DIP-Switch Setting

There are 2-set DIP-switch in front panel that can setting for SFP (Link Fault Pass)

function and SFP transmission rate, see below in Table 2.2

DIP 1

DIP 2 Description

ON ON LFP Enable and Set SFP to 100Mbps

ON OFF LFP Enable and Set SFP to 1000Mbps

OFF ON LFP Disable and Set SFP to 100Mbps

OFF OFF LFP Disable and Set SFP to 1000Mbps (Default)

Table 2.1

LED Indicators for IMC-C1000-SFP Series

Table 2.2

DIP‐switch setting for IMC-C1000-SFP Series

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

2.6 Ethernet Ports

 RJ-45 Ports

RJ-45 Ports (Auto MDI/MDIX): The RJ-45 port is auto-sensing for 10/100Base-Tx, or 1000Base-

Tx device connections. Auto MDI/MDIX means that the media converter can connect to another

switch or workstation without changing the straight-through or crossover cabling. See the figures

shown below for the straight-through and crossover cabling schematics.

 RJ-45 Pin Assignments (Table 2.3)

Pin Number Assignment

1 Rx+

2 Rx-

3 Tx+

6 Tx-

The RJ45 port on this industrial Ethernet media converter supports automatic MDI operations. Users

can use straight-through cables (Figure 2.4 & Figure 2.5) for all network connections to PCs, servers,

and other switches or hubs. With a straight-through cable, pins 1, 2, 3, and 6, at one end of the cable,

are connected straight through to pins 1, 2, 3 and 6 at the other end of the cable. The table below

(Table 2.3) shows the 10BASE-T/100BASE-TX/1000BASE-T MDI port pin outs.

Note

: The “+” and “-” signs represent the polarity of the wires that make up each wire pair.

Pin MDI-X Signal Name MDI Signal Name

1 Receive Data plus (RD+) Transmit Data plus (TD+)

2 Receive Data minus (RD-) Transmit Data minus (TD-)

3 Transmit Data plus (TD+) Receive Data plus (RD+)

6 Transmit Data minus (TD-) Receive Data minus (RD-)

Table 2.3

RJ45 Pin Assignments

Table 2.4

Ethernet Signal Pin Outs

Antaira Technologies - Industrial Media Converter

IMC-C1000-SFP Series User Manual V1.2

The following figures show the cabling schematics for straight-through and crossover cables.

2.7 Cabling

 Twisted-pair segments can be connected with an unshielded twisted pair (UTP) or shielded

twisted pair (STP) cable. The cable between the equipment and the link partner (media

converter, switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.

 The small form‐factor pluggable (SFP) is a compact optical transceiver used in optical

communications for both telecommunication and data communication applications.

 To connect the transceiver and LC cable, please follow below steps:

o Step 1 - Insert the SFP transceiver module into the SFP slot as shown below in

Figure 2.6. Notice that the triangle mark is at the bottom of the SFP slot. Figure

2.7 shows the SFP transceiver module was inserted.

Figure 2.4 Figure 2.5

Straight-Through Cables Schematic Crossover Cables Schematic

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ANTAIRA Medienkonverter Handbücher

ANTAIRA

ANTAIRA IMC-C100 Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-C1000-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-280 Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP-bt Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-2805P-SFP Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-C1000 Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C100 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-101AG-T Bedienungsanleitung

ANTAIRA

ANTAIRA Optolinx IMP-100A Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-3102SFP-SFP-DR Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA EMC-0201-WX Bedienungsanleitung

ANTAIRA

ANTAIRA IMC-C1000 Series Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP-bt-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCN-3112 Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-100SX Bedienungsanleitung

ANTAIRA

ANTAIRA STF-502C series Bedienungsanleitung

ANTAIRA

ANTAIRA FCS-3312WX Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-6001-SFP+ Bedienungsanleitung

ANTAIRA

ANTAIRA BTS-1000A Bedienungsanleitung

ANTAIRA

ANTAIRA FCM-2312WX Bedienungsanleitung

ANTAIRA

ANTAIRA IMP-C1000-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA FCU-1802Px Bedienungsanleitung

ANTAIRA

ANTAIRA BTS-1000A Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung