ANTAIRA LMX-0601G-SFP Series Bedienungsanleitung

Antaira Industrial Ethernet Switches

LMP-0601G-SFP Series User Manual V1.0

LMX-0601G-SFP Series

6-Port Industrial Gigabit Managed Ethernet Switches

5*10/100/1000Tx and 1*100/1000 SFP Slot,

12~48VDC Power Input

User Manual

Version 1.0

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC may make improvements and/or changes to the product and/or specifications of the product described in this

manual, without prior notice. Antaira Technologies, LLC will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

iii

FCC Warning

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Gigabit Managed Ethernet Switches

User Manual

Version 1.0 (November 2014)

This manual supports the following models:

LMX-0601G-SFP

LMX-0601G-SFP-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

Table of Contents

1. Introduction................................................................. 1

1.1Product Overview............................................... 1

1.2 Product Software Features ................................ 1

1.3 Product Hardware Features............................... 2

1.4 Package Contents.............................................. 2

1.5 Safety Precaution............................................... 2

2. Hardware Description................................................. 3

2.1 Physical Dimensions.......................................... 3

2.2Front Panel......................................................... 4

2.3 Top View............................................................ 4

2.4LED Indicators.................................................... 5

2.5Ethernet Ports..................................................... 6

2.6 Cabling............................................................... 8

2.7 Wiring the Power Inputs................................... 10

2.8 Wiring the Fault Alarm Contact........................ 11

3.Mounting Installation ................................................ 12

3.1DIN-Rail Mounting............................................ 12

3.2Wall Mounting................................................... 13

4.Hardware Installation................................................ 14

4.1Installation Steps.............................................. 14

5.Web Management...................................................... 15

5.1 Web Console Configuration............................. 15

5.1.1 About Web-Based Management................. 15

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

5.2 Basic Setting.................................................... 16

5.2.1 System Information..................................... 16

5.2.2 Admin &Password....................................... 17

5.2.3 IP Setting..................................................... 18

5.2.4 System Time............................................... 19

5.3Port Management ............................................. 20

5.3.1 Port Status .................................................. 20

5.3.2 Port Configuration....................................... 20

5.5 ERPS ............................................................... 22

5.5.1 ERPS Status............................................... 23

5.5.2 ERPS Configuration.................................... 23

5.5.3 Before Configuring ERPS........................... 25

5.6 Spanning Tree ................................................. 32

5.6.1 RSTP Status ............................................... 33

5.6.2 RSTP Configuration.................................... 33

5.6.3 MSTI Status ................................................ 35

5.6.4 MSTI Configuration..................................... 36

5.7. 802.1Q VLAN.................................................. 38

5.7.1 802.1Q VLAN Settings................................ 38

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

5.7.2 802.1Q VLAN Settings................................ 39

5.8. IGMP Snooping............................................... 39

5.8.1IGMP Settings ............................................. 40

5.8.2IGMP Snooping Status Table...................... 41

5.9 QoS (Traffic Prioritization)................................ 41

5.9.1 QoS Classification....................................... 42

5.9.2 CoS Mapping .............................................. 43

5.9.3 ToS Mapping............................................... 44

5.10Port Mirroring.................................................. 45

5.11 SNMP.......................................................... 46

5.11.1SNMP Agent.............................................. 46

5.11.2SNMP Trap Setting ................................... 47

5.12System Warning............................................. 48

5.12.1Syslog Setting ........................................... 48

5.12.2System Event Log...................................... 49

5.12.3SMTP Setting ............................................ 50

5.12.4Event Selection ......................................... 51

5.12.5Fault Alarm................................................ 51

5.13MAC Table...................................................... 52

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

vii

5.13.1 MAC Address Table.................................. 52

5.13.2 MAC Table Configuration ......................... 52

5.14 Maintenance .................................................. 53

5.14.1 Upgrade .................................................... 53

5.14.2 Reboot....................................................... 54

5.14.3 Default....................................................... 54

5.15Configuration.................................................. 54

5.15.1 Save..................................................... 55

5.15.2Backup & Store ......................................... 55

5.15.3 Auto Load & Backup................................. 56

5.16 Logout ......................................................... 57

6.Command Line Interface Management ................... 57

6.1 About CLI Management................................. 57

7. Technical Specifications.......................................... 74

Antaira Industrial Ethernet Switches

LMP-0601G-SFP Series User Manual V1.0

1. Introduction

Antaira Technologies’ industrial managed switches come with a pre-installed “user friendly” web

console interface, which allows users to easily configure and manage the units, whether one is using

a serial console and command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or

simple network management protocols (SNMP).

1.1 Product Overview

Antaira’s LMX-0601G-SFP series is a 5-port industrial Gigabit managed Ethernet switch that is

embedded with 5*10/100/1000Tx Ethernet ports and 1*100/1000 dual rate SFP slot for fiber

connection. This series is a fully manageable industrial Ethernet switch with a pre-loaded Layer

2 network management web console that supports a low voltage redundant power input range

from 12~48VDC with a voltage booster. This product series is IP30 rated, DIN-rail mountable,

and has two wide operating temperature models for either a standard temperature range ( STD:

-10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also provides high

EFT and ESD protection for any industrial networking application within factory automation, ITS,

power/utility, water wastewater, and any other outdoor or harsh environment.

1.2 Product Software Features

Network Redundancy

STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for

network redundancy

Network Management

Web UI based management, SNMP v1/v2, Serial Console

Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,

broadcast storm control, Diffserv

IEEE802.1q VLAN, port-based VLAN support

IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group

Supports RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, SSH/SSL,

TFTP.

Port Configuration

Status, statistics, mirroring, rate limiting, event syslog

Event Handling

Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP

trap and Fault Alarm Relay Output

Software Upgrade via TFTP and HTTP

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

Configuration Backup –USB Port

1.3 Product Hardware Features

System Interface and Performance

All RJ-45 ports support Auto MDI/MDI-X Function

Embedded 5*10/100/1000Tx Ethernet ports, and 1*100/1000 SFP slot

Store-and-forward switching architecture

8K MAC address table

Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

Power Input

DC 12~48V redundant with a 6-pin removal terminal block

One user programmable alarm relay contact

Operating Temperature

Standard operating temperature models: -10°C to 70°C

Extended operating temperature models: -40°C to 75°C

Case/Installation

IP-30 protection metal housing

Installation in pollution degree to environment

DIN-Rail and wall mount design

1.4 Package Contents

1–LMX-0601G-SFP series: 5-Port industrial managed Ethernet switch, with 5*10/100/1000Tx,

and 1*100/1000 SFP Slot

1-Product CD

2-Wall mounting brackets and screws

1-RJ45 to DB9 Serial Console cable

1-DC cable –18 AWG & DC jack 5.5x2.1mm

1.5 Safety Precaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet switch’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Antaira Industrial Ethernet Switches

LMX-0601G-SFP Series User Manual V1.0

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira’s LMX-0601G-SFP series: 6-port

industrial managed Ethernet switch with 5*10/100/1000Tx, and 1*100/1000 SFP slot; 12~48VDC

power input. (W x D x H) is 46mm x 99mm x 142mm

Figure2.1

LMX-0601G-SFP Series Physical Dimensions

Inhaltsverzeichnis

Andere ANTAIRA Netzwerk-Router Handbücher

ANTAIRA

ANTAIRA LMP-0601G-SFP-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0702G-SFP-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARS-7235-AC Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0601G-SFP-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1204GN-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1002C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-500A Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-C500G Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0500G-BT Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-800N Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-2804GN-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-800AG Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-800AGH-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1202M-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA ARX-7234-AC-PD-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602-24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1600G-M12-67-110 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0500 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-0802C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LRX-0200 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1600G Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung