Antari B-100 Bedienungsanleitung

User Manual for the B-100(X) Bubble Machine

♦Save and read these instructions

♦Bitte lesen Sie und sichern Sie diese Anweisungen

♦Lisez et Gardez ces instructions

2000 Antari Lighting and Effects Ltd.

Antari Bubble Machine

Thank you for choosing the Antari Bubble Machine. You now own a rugged and

powerful state-of-the-art machine. Prior to use, we suggest that you carefully

read all of the instructions. By following the suggestions found in this user

manual, you can look forward to exceptional performance from your Antari

Bubble Machine for years to come.

Please follow these operation, safety and maintenance instructions to

ensure a

long and safe life for your Antari Bubble Machine.

Specifications

Power: AC 120V/60Hz (120V Model)

AC 230V/50Hz (230V Model)

Fuse: F2A/250V (120V Model)

T1A/250V (230V Model)

Dimensions (mm): 236.6 x 189.2 x 150

Weight: Net – 3.4 kg, Gross – 4.5 kg

CAUTIONS

Pay attention to all warning labels and instructions printed on the exterior

of your Antari Bubble Machine

Do not overfill your bubble machine. Overfilling will cause the unit to leak.

Danger of electric shock

Keep this device dry.

Keep the bubble machine upright.

For the 110V models, use 3-prong grounded electrical outlet only. Prior to

use take care to determine that the unit is installed at the rated voltage.

Turn off or unplug when not in use.

The power plug needs to be clearly seen by user when installed on the wall.

This machine is not water-proof or splash-proof. If moisture, water, or any

liquid gets inside the housing, immediately unplug the unit and contact a

service technician or your dealer before using it again.

No user serviceable parts inside. Refer to your Antari dealer or other

qualified service personnel.

For indoor use only. Not designed for outdoor use.

This appliance must be earthed.

For adult use only. The bubble machine must be installed out of the reach

of children. Never leave the unit running unattended.

Never aim the output at open flames.

Extended use will make all surfaces slippery.

Position output of bubbles away from persons.

Switch off from mains when refilling the liquid or cleaning the system.

Regular cleaning of the bubble wheel is required.

Do not transport with liquid. If the machine get wet, do not use until it is

completely dry.

Antari bubble liquid may leave permanent marks on clothing.

Pay attention to all warning labels and instructions printed on the exterior

of your Antari Bubble Machine.

Unpacking & Inspection

Open the shipping carton and check that all equipment necessary to operate

the system has arrived intact. In addition to the Antari Bubble Machine, you

should receive the following items:

1. This user manual.

2. Power cord and plug.

Before beginning initial setup of your Antari Bubble Machine, make sure that

there is no evident damage caused by transportation.

In the event that the unit’s housing or cable is damaged, do not plug it in and

do not attempt to use it until after contacting your dealer for assistance.

Setup

Remove all packing materials from the bubble machine.

Place bubble machine on a flat surface.

Loosen the side screws and lift the housing upwards. You will see a liquid

tank.

Pour bubble liquid into the liquid tank, being careful not to exceed the

maximum fluid level. DO NOT OVERFILL.

When the container is full, lower the housing and tighten the screws.

IMPORTANT SAFETY NOTICE:

Ensure your bubble machine is unplugged from the mains electrical supply

before attempting to open the housing.

To help avoid accidental exposure to dangerous live AC mains voltage, two

safety screws are fitted that require a screwdriver to remove. Once these are

removed, the finger screws can be undone by hand (see photo above).

Once the screws are removed, the lid of the housing can be carefully swung

upwards, as shown above. Take care not to spill any of the bubble fluid inside

the unit.

The fluid tank is designed to fit only one way around. Make sure you insert it

correctly, as shown above, with the lower edge facing into the machine.

OPERATION

Turn on the power switch located on the back of the bubble machine. You will

notice that the internal bubble drum and fan are activated. Bubbles are now

produced.

B-100X

B-100X contains a control board allowing the bubble machine to use the

wireless and timer remote controls. The B-100, without this board, cannot use

these remote controls. The two versions are identical in all other respects.

Remotes

Z-10 (on / off)

BCT-1 (Timer for B-100X)

BCR-1 (Wireless for B-100X)

Save these instructions

C08B100

Andere Handbücher für B-100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Antari Nebelmaschine Handbücher

Antari

Antari Z-1200II Bedienungsanleitung

Antari

Antari DNG250FE Bedienungsanleitung

Antari

Antari DNG-200 Bedienungsanleitung

Antari

Antari FT-200 Bedienungsanleitung

Antari

Antari X-310PRO Bedienungsanleitung

Antari

Antari Fazer Z-300 Bedienungsanleitung

Antari

Antari HZ-500 Montageanleitung

Antari

Antari HZ-350 Bedienungsanleitung

Antari

Antari ICE-100 Bedienungsanleitung

Antari

Antari F-6 Bedienungsanleitung

Antari

Antari F-80Z Bedienungsanleitung

Antari

Antari ICE Bedienungsanleitung

Antari

Antari 20210616 Bedienungsanleitung

Antari

Antari M-11 Bedienungsanleitung

Antari

Antari Z Series Bedienungsanleitung

Antari

Antari AF-5X Bedienungsanleitung

Antari

Antari B-200 Bedienungsanleitung

Antari

Antari FT-100 Fire Training Bedienungsanleitung

Antari

Antari FT-200 Bedienungsanleitung

Antari

Antari HZ-350 Bedienungsanleitung

Antari

Antari F-4D Fazer Bedienungsanleitung

Antari

Antari DNG-250 Bedienungsanleitung

Antari

Antari X-510PRO Bedienungsanleitung

Antari

Antari F-450 Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung