Antari CINEMA HAZE CH-1 Bedienungsanleitung

CH-1

CINEMA HAZE

User Manual

- ENGLISH

Safety Information

Please read the following safety information carefully before operating the machine.

Information includes important safety information about installation, usage, and

maintenance. Pay attention to all warning labels and instructions in this manual and

printed on the machine.

If you have questions about how to operate the machine safely, please contact your local Antari

dealer for help.

․ Keep this device dry.

․ Always connect to a grounded circuit to avoid risk of electrocution.

․ Before connecting the machine to power, always check the voltage indicated on the machine

matches to your local AC voltage. Do not use the machine if the AC power voltage does not match.

․ Disconnect the machine from AC power and gas cylinder before servicing and when not in use.

․ This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled, disconnect

AC power and clean with a damp cloth. If fluid is spilled onto electronic parts, immediately unplug

the machine and contact your local Antari dealer for advice.

․ No user serviceable and modifiable parts inside. Never try to repair this product, unauthorized

technician may lead the machine to damage or malfunction.

․ For adult use only. Never leave the machine running unattended.

․ Install in a well ventilated area. Provide at least 50 cm of space around the machine.

․ Never add flammable liquid of any kind to the machine.

․ Make sure there are no flammable materials close to the machine while operating.

․ Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

․ If the machine fails to work, unplug the machine and stop operation immediately. Contact your local

Antari dealer for advice.

․ Before transporting the machine, make sure the fluid tank is completely drained.

․ Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it securely. In

case of eye contact or if fluid is swallowed immediately seek medical advice.

․ The appliance is not to be used by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge.

․ Children being supervised not to play with the appliance.

․ If the supply cord is damaged, it must be replaced by a special cord or assembly available from the

manufacturer or its service agent.

Product Dimension

579 mm 164 mm

164 mm

311 mm

Product Overview

Setting Up

安裝操作說明

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm open

space around the machine.

Step 2: Connect machine to mains power (AC100-240VAC, 50/60Hz)

Step 3: Connect gas inlet to gas cylinder equip with pressure regulator. (Gas inlet 9/16 – 18 R.H.)

Step 4: Set pressure regulator between 50 to 60 psi, then open gas cylinder

Adjustable Fan

Output Nozzle

TFT LCD Control Panel

Wireless Receiver

XLR 3 / 5-Pin DMX Connector

Neutrik TRUE 1 Power Connector

Breaker

Power Switch

Gas Inlet 9/16 – 18 R.H.

Screen Switch

Fluid Tank Cap

Step 5: Fill the fluid tank with Antari approved fluid.

Step 6: Press “ HEATER” menu, then press “ START” to start heating. Machine will take

approximately 8 mins to heat up.

Always connect the machine to a protected circuit and ensure it is properly grounded to

avoid risk of electrocution.

Step 7: To start making haze press “ MANUAL” menu, then press “ START” .

Press “ STOP” to stop haze. Press “ SETTING” menu to adjust haze and fan output level.

Step 8: To turn off machi ne press “ POWER OFF” menu, and follow direction shown on display.

Shut off gas cylinder, at the same time machine will start release the pressure. Make sure pressure

is completely released by checking the regulator. Disconnect power and gas connection to finish

shutting down process.

Operation

Control Panel Operation

The machine can be operated with the TFT LCD control panel located on the rear.

Main Menu

Level 1

Level 2

Level 3

TIMER 1

Interval

0 – 200 mins

Duration

0 – 200 mins

Output Level

5 – 40 psi

Fan

20 – 100%

TIMER 2

Interval

0 – 200 mins

Duration

0 – 200 mins

Output Level

5 – 40 psi

Fan

20 – 100%

DMX

Address

1 – 512

Channel Mode

1 / 3 / 5 Channels

Link Mode

Wireless / Wired

Wireless

Unlink

POWER OFF

MANUAL

Output Level

5 – 40 psi

Fan

20 – 100%

CLEAN

HEATER

DMX Setup

Address

1 – 512

Channel Mode

1 / 3 / 5 Channels

Link Mode

Wireless / Wired

Wireless

Unlink

Information

Software Version

Wireless Signal

Temperature

Pressure

Device Hour

Setting

LCD Backlight

High / Normal / Low / Auto

Auto Start

On / Off

Factory Reset

Language

English /中文

Software Update

Proceed

Keypad Sound

On / Off

DMX Connector Pin Assignment

The machine provides a 3 or 5 pin XLR connector for DMX connection. The diagram below indicates

pin assignment information.

Function

Ground

Data-

Data+

N/A

DMX Operation

Making the DMX Connection – Connect the machine to a DMX controller or to one of the machines

in the DMX chain. The machine uses both 3-pin and 5-pin XLR connector for DMX connection, the

connector is located on the rear of the machine.

DMX Channel Function

1 Channel Mode

DMX Value Range

Function

Output Level

0 – 4

Off

5 – 255

1 – 100%

3 Channel Mode

DMX Value Range

Function

Output Level

0 – 4

Off

5-255

1 – 100%

Fan Level

0 – 4

Off

5 – 255

1 – 100%

Heater

0 – 127

Off

128 – 255

5 Channel Mode

DMX Value Range

Function

Output Level

0 – 4

Off

5-255

1 – 100%

Fan Level

0 – 4

Off

5 – 255

1 – 100%

Heater

0 – 127

Off

128 – 255

Operation Mode

0 – 127

DMX

128 – 192

Timer 1

193 – 255

Timer 2

Cleaning

0 – 127

Off

128 – 255

RDM Control

The CH-1 CINEHAZE is RDM enabled, allowing control system to configure, mointor and manage.

See below table for supported RDM parameters

Value

RDM Parameter ID’s

GET Allowed

SET Allowed

0x0001

DISC_UNIQUE_BRANCH

0x0002

DISC_MUTE

0x0003

DISC_UN_MUTE

0x0030

STATUS_MESSAGE

0x0050

SUPPORTED_PARAMETERS

0x0051

PARAMETER_DESCRIPTION

0x0060

DEVICE_INFO

0x0070

PRODUCT_DETAIL_ID_LIST

0x0080

DEVICE_MODEL_DESCRIPTION

0x0081

MANUFACTURER_LABEL

0x0082

DEVICE_LABEL

0x00A0

LANGUAGE_CAPABILITIES

0x00B0

LANGUAGE

0x00C0

SOFTWARE_VERSION_LABEL

0x00E0

DMX_PERSONALITY

0x00E1

DMX_PERSONALITY_DESCRIPTION

0x00F0

DMX_START_ADDRESS

0x0200

SENSOR_DEFINITION

0x0201

SENSOR_VALUE

0x0400

DEVICE_HOURS

0x1000

IDENTIFY_DEVICE

Fluid

Use Antari CHL oil-based fluid for the best effect on CH-1 CINEMAHAZE.

The machine is tested and calibrated with this liquid to get the best

output performance. Warranty will be void if any other type of liquid is

used, improper use of liquid may lead to machine faluire and malfunction.

Service and Maintenance

․ Do not allow the machine to become contaminated.

․ Remove dust from air vents with air compressor, vacuum or a soft brush.

․ Only use a damp cloth to clean the casing.

․ It is recommended to run the machine on a monthly basis in order to achieve best

performance and output condition.

․ Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

․

Breaker Reset

Disconnect AC power before reset breaker. Only replace fuse with same type and rating.

Step 1: Disconnect AC power

Step 2: Flip breaker to ON position

Step 3: Turn on machine to test

Breaker

120V = 8A 250V

240V = 8A 250V

Error Message

Pressure Error

When fluid reservoir can not reach proper pressure to work, pressure error will be displayed and

stop machine from working. It may be caused by one of following:

- Fluid reservoir cap is loosened

- Leak in high pressure pipeline

- Gas cylinder not open properly

- Gas cylinder running empty

- Pressure regulator not set to range between 50 – 60psi (3.4 – 4.1 bar)

- Pressure sensor failure or damaged

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Antari Nebelmaschine Handbücher

Antari

Antari Z-350 FAZER Bedienungsanleitung

Antari

Antari HZ-500 Bedienungsanleitung

Antari

Antari PM-1 Bedienungsanleitung

Antari

Antari HZ-400 Bedienungsanleitung

Antari

Antari AF-5X Bedienungsanleitung

Antari

Antari W-715 Fog Jet Bedienungsanleitung

Antari

Antari LCU-2S Bedienungsanleitung

Antari

Antari S-500 Bedienungsanleitung

Antari

Antari M-1 Bedienungsanleitung

Antari

Antari F-450 Bedienungsanleitung

Antari

Antari F-80Z Bedienungsanleitung

Antari

Antari Fazer X-310 PRO Bedienungsanleitung

Antari

Antari HZ-500 Montageanleitung

Antari

Antari Z-1200II Bedienungsanleitung

Antari

Antari W-508 Bedienungsanleitung

Antari

Antari Z-1500 III Bedienungsanleitung

Antari

Antari HZ-100 Bedienungsanleitung

Antari

Antari Z Series Bedienungsanleitung

Antari

Antari X FAZER Bedienungsanleitung

Antari

Antari Fogger X-510II Bedienungsanleitung

Antari

Antari SW-250 Bedienungsanleitung

Antari

Antari X-510PRO Bedienungsanleitung

Antari

Antari DNG250FE Bedienungsanleitung

Antari

Antari M-1 Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung