Antari Z-380 Bedienungsanleitung

Z-380 Fazer

Machine User Manual

English

User Manual

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

․Keep this device dry.

․Always connect to a grounded circuit to avoid risk of electrocution.

․Before connecting machine to power, always check voltage indicate on machine match

to your local AC voltage. Do not use the machine if AC power voltage does not match.

․Disconnect the machine from AC power before servicing and when not in use.

․This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,

immediately unplug the machine and contact your local Antari dealer for advice.

․No user serviceable and modifiable parts inside. Never try to repair this product,

unauthorized technician may lead machine to damage or malfunction.

․For adult use only. Never leave the machine running unattended.

․Installed in well ventilated area. Provide at least 50 cm space around the machine.

․Never add flammable liquid of any kind to the machine.

․Make sure there are no flammable materials close to the machine while operating.

․Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

․If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advise.

․Before transporting the machine, make sure the fluid tank is completely drained.

․Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

328

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retrain the

packing material for inspection.

What is included: 1 x Z-380 Fazer

1 x Power Cord

1 x User Manual

Product Dimension

Product Overview

264.9 mm

328 mm

247.7 mm

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 1.5 mintues.

Once the machine has reached operating temperature, the LCD display will show “Ready to

Faze”. Now the machine is ready for operation.

Step 5: To start making haze, locate the Volume button on the control panel, and press the

button to start making faze.

Step 6: To turn off the machine, press Stop button and put the power switch to the OFF

position.

XLR 3-Pin DMX Connector

LCD display Control Panel

Power Inlet

Fan Speed Adjustment Knob

Wire Remote Socket

Main Power Switch

XLR 5-Pin DMX Connector

Output Level Adjustment Knob

Operation

Control Panel Operation

The machine can be operated with onboard digital control interface or two rotary knobs

located on the rear.

Rotary Knob

Function

SMOKE Turn haze on/off, adjust output volume from 0~100%

FAN Adjust fan speed from 20%~100%

Button Function

[MENU] Scroll through setting menu

▲[UP]/[TIMER] Up/Activate Timer function

▼[DOWN]/[VOLUME] Down/Activate Volume function

[STOP] Deactivate Timer/Volume function

Control Menu

Set interval from 1 to 180 seconds

Set duration from 1 to 120 seconds

Set timer output from 1 to 100%

Interval

Set 180s

Duration

Set 120s

Timer

Out 100%

Set volume output from 1 to 100%

Set fan output from 20 to 100%

Set DMX address from 1 to 511

Set DMX mode Sync, 1Ch or 2Ch

Turn On or Off wireless control

Turn On or Off run last setting function

Remote Control Operation (Optional)

To operate the machine by remote control, connect the remote to the microphone jack

located on the rear of machine. Use the switch to turn haze on/off, and use the rotary knob to

adjust the output volume from 0~100%.

Volume

Out 100%

Fan

Out 100%

DMX512

Add. 511

DMX Mode

1Ch

Wireless

OFF

Quick

StartOFF

Wireless Operation (Optional)

Wireless remote control system W-2 consists of a transmitter equipped with four buttons to

turn faze output on or off, and adjust output volume; with an onboard receiver attach to the

rear panel of Z-380.

W-2 Wireless Transmitter

Wireless Receiver

Wireless remote control function:

[A] button – Turn on faze output

[B] button – Turn off faze output

[C] button – Increase output volume

[D] button – decrease output volume

In a free open space the effective distance is 50 meters, actual usage depending on

obstacle level the effective distance is 10-25 meters.

Registering transmitter

Transmitter can be pair or deleted from the receiver. Each receiver can pair up to 10

transmitters. Follow below steps to pair or delete transmitter from receiver.

Step 1: Power off Z-380 Fazer

Step 2: Press and hold [DOWN] button

Step 3: Turn power on and hold [DOWN] button until below menu shows on display

Step 4A: Press [UP] to pair a new transmitter; press any button on the W-2 remote to finish

pairing.

Step 4B: Press [DOWN] button to delete existing transmitter.

Transmitter battery replacement

If effective distance seems to be decreased, it is possible the battery level are low and

require replacement. In order to replace the battery, undo the three screws on the back of

transmitter to release the cover. Replace with same type and specification of battery which is

27A 12V

DMX Connector Pin Assignment

The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below indicate

pin assignment information

UP: Pair

DOWN:Del

Pin Function

1 Ground

2 Data-

3 Data+

DMX Operation

Making the DMX Connection – Connect machine to a DMX controller or to one of the

machines in the DMX chain. The machine uses an 3 or 5 pin XLR connector for DMX

connection, the connector is located on the rear of the machine.

DMX Channel Function

Channel Mode Channel Value Function

2 1 0-5 Faze off

2 6-255 Faze 1-100%

1 1

0-5 Faze off

Fan 100%

6-255 Faze 1-100%

Fan 100%

Sync 1

0-5 Faze Off

Fan 20%

6-255 Faze 1-100%

Fan 21-100%

Fluid

Only use Antari FLG water-based liquid for the Z-380 Fazer. The machine is tested and

Andere Handbücher für Z-380

Inhaltsverzeichnis

Andere Antari Nebelmaschine Handbücher

Antari

Antari F-450 Bedienungsanleitung

Antari

Antari X-510PRO Bedienungsanleitung

Antari

Antari M-9 RGBAW Bedienungsanleitung

Antari

Antari Z-Stream Bedienungsanleitung

Antari

Antari 20210616 Bedienungsanleitung

Antari

Antari Z-390 Series Bedienungsanleitung

Antari

Antari Z-1500II Bedienungsanleitung

Antari

Antari F-5D Fazer Bedienungsanleitung

Antari

Antari Z-800II Bedienungsanleitung

Antari

Antari M-4 Bedienungsanleitung

Antari

Antari LCU-2S Bedienungsanleitung

Antari

Antari W-715 Bedienungsanleitung

Antari

Antari ICE Bedienungsanleitung

Antari

Antari DNG-250 Bedienungsanleitung

Antari

Antari Fog cooler DNG-100 Bedienungsanleitung

Antari

Antari II Series Bedienungsanleitung

Antari

Antari B-100X Bedienungsanleitung

Antari

Antari HZ-500 Bedienungsanleitung

Antari

Antari FT-20X Bedienungsanleitung

Antari

Antari X FOGGER Bedienungsanleitung

Antari

Antari Z-80 Bedienungsanleitung

Antari

Antari M-7 RGBA Bedienungsanleitung

Antari

Antari Z-1520 RGB Bedienungsanleitung

Antari

Antari Fog cooler DNG-100 Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung