Antari Z-350 FAZER Bedienungsanleitung

Z-350 FAZER

USER MANUAL

English Français Deutsch€ € €

2013 Antari Lighting and Effects Ltd.

www.clubsoundrent.nl

User Manual

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

Keep this device dry.

Always connect to a grounded circuit to avoid risk of electrocution.

Before connecting machine to power, always check voltage indicate on machine match

to your local AC voltage. Do not use the machine if AC power voltage does not match.

Disconnect the machine from AC power before servicing and when not in use.

This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,

immediately unplug the machine and contact your local Antari dealer for advice.

No user serviceable and modifiable parts inside. Never try to repair this product,

unauthorized technician may lead machine to damage or malfunction.

For adult use only. Never leave the machine running unattended.

Installed in well ventilated area. Provide at least 50 cm space around the machine.

Never add flammable liquid of any kind to the machine.

Make sure there are no flammable materials close to the machine while operating.

Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advise.

Before transporting the machine, make sure the fluid tank is completely drained.

Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retrain the

packing material for inspection.

What is included: 1 x Z-350 Fazer

1 x Power Cord

1 x User Manual

Product Dimension

Product Overview

Fan

Smoke Output Nozzle

DIP Switch (DMX

Address Setting)

Wire Remote Socket

Fluid Level Gauge

Fluid Tank Cap

Output Level

Adjustment Knob

Fan Speed

Adjustment Knob

Power Inlet

Main Power Switch

XLR 3-Pin DMX

Connector

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 4 mintues.

Once the machine has reached operating temperature, the status LED will light €Solid

Green•. Now the machine is ready for operation.

Step 5: To start making haze, locate the SMOKE rotary knob on the back side of machine,

and simply turn it clockwise to start.

Step 6: To turn off the machine, put the power switch to the OFF position.

Operation

Control Panel Operation

The machine can be operated with the two rotary knobs located on the rear.

Rotary Knob

Function

SMOKE

Turn haze on/off, adjust output volume from 0~100%

FAN

Adjust fan speed from 20%~100%

Remote Control Operation (Optional)

To operate the machine by remote control, connect the remote to the microphone jack

located on the rear of machine. Use the switch to turn haze on/off, and use the rotary knob to

adjust the output volume from 0~100%.

DMX Operation

Making the DMX Connection ‚ Connect machine to a DMX controller or to one of the

machines in the DMX chain. The machine uses an 3-pin XLR connector for DMX connection,

the connector is located on the rear of the machine.

Address Setup ‚ Use the DIP switch located on the rear of the machine to set the DMX

address. The machine occupies 2 control channels. The starting address is defined as the

first channel from which the machine will respond to the controller. Always double check to

make sure there are no overlapping channles in order to control the machine correctly.

DMX Channel Function

Channel 1

DMX Value Range

Function

Haze Output Level

0 ‚ 4

Haze Off

5 ‚ 255

Haze Output 1 ‚ 100%

Channel 2

DMX Value Range

Function

Fan Output Level

0 ‚ 4

Fan 20%

5 ‚ 255

Fan 21 ‚ 100%

Fluid

Only use Antari FLG water-based liquid for the Z-350 Fazer. The machine is tested and

calibrated with this liquid to get the best output performance. Warranty will be void if any

other type of liquid is used, improper use of liquid may lead to machine failure and

malfunction.

Service and Maintenance

Do not allow the machine to become contaminated.

Remove dust from air vents with air compressor, vacuum or a soft brush.

Only use a damp cloth to clean the casing.

Before storing run distilled water through the system to help avoid condensing the pump

or heater.

It is recommended to run the machine on a monthly basis in order to achieve best

performance and output condition.

Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

Fuse Replacing

Disconnect AC power before replacing fuse. Only replace fuse with same type

and rating.

Step 1: Disconnect power cord from supply.

Step 2: Use a flat-head screwdriver to release fuse holder.

Step 3: Replace fuse with exact same type and rating as indicated below.

Step 4: Reinsert fuse holder.

Fuse

100V = T6.3A 250V

110 ‚ 120V = T7A 250V

220 ‚ 240V = T4A 250V

Status Messages

Status LED

Indication

Flashing Green

Machine is heating up

Flashing Green (3 seconds)

Self Cleaning

Solid Green

Machine ready for operation

Flashing Amber

Producing haze

Solid Amber

DMX signal received

Solid Red

Heater is overheating, machine can

not be operated

Flashing Red

Liquid detected backflow to air pump

Flashing Red/Green

Machine cannot heat up

Technical Specifications

Input voltage 110-120V 60Hz

220-240V 50Hz

Fuse 100V = T6.3A 250V

110 ‚ 120V = T7A 250V

220 ‚ 240V = T4A 250V

Heater 100Vac - 520W , 120Vac ‚ 800W

220Vac - 600W , 240Vac ‚ 730W

Warm-up time 3.5 ‚ 4 min. (approx.)

Coverage volume 3000 cu.ft./min. (85 m•/min.)

Max. operating time 7.2 hrs max. output

Fluid tank capacity 1.3 l (0.34 gal)

Fluid consumption 3 ml/min.

Compatible fluid Antari FLG water-based fluid

Control option DMX 512, Cable remote, Manual,

Adjustable haze volume and fan speed

DMX channels 2 channels, haze volume and fan speed

Power connection IEC

DMX data connection 3-pin XLR

Remote control connection 3.5mm headphone jack

Dimension L 320 x W 153 x H 391 mm

(L 12.59 x W 6.02 x H 15.30 inch)

Dry weight 8.82 kg (19.44 lb)

Accessories (Optional) Z-3 remote control

Inhaltsverzeichnis

Andere Antari Nebelmaschine Handbücher

Antari

Antari Ip-1000 Bedienungsanleitung

Antari

Antari S-500 Bedienungsanleitung

Antari

Antari HZ-100 Bedienungsanleitung

Antari

Antari WiFi-800 Bedienungsanleitung

Antari

Antari M-9 RGBAW Bedienungsanleitung

Antari

Antari FT-50 Bedienungsanleitung

Antari

Antari W-715 Bedienungsanleitung

Antari

Antari HZ-350 Bedienungsanleitung

Antari

Antari Z-380 Bedienungsanleitung

Antari

Antari Z-1500II Bedienungsanleitung

Antari

Antari IP-1500 Bedienungsanleitung

Antari

Antari FT-20 Bedienungsanleitung

Antari

Antari Z-1200 III Bedienungsanleitung

Antari

Antari F-5D Fazer Bedienungsanleitung

Antari

Antari Z Series Bedienungsanleitung

Antari

Antari Z Series Bedienungsanleitung

Antari

Antari M-11 Bedienungsanleitung

Antari

Antari DNG-200 Bedienungsanleitung

Antari

Antari B-200 Bedienungsanleitung

Antari

Antari F-80Z Bedienungsanleitung

Antari

Antari M-7 RGBA Bedienungsanleitung

Antari

Antari W-508 Bedienungsanleitung

Antari

Antari Z-1020 Bedienungsanleitung

Antari

Antari SFX-1000 Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung