Antec NINE HUNDRED TWO V3 User's Bedienungsanleitung

NINE HUNDRED TWO V3

SER

’

ANUAL

Table of Contents

Introduction

1.1 Case Spe ifi ations ............................................................................................. 3

1.2 Diagram .............................................................................................................. 3

Hardware Installation Guide

2.1 Setting Up .......................................................................................................... 4

2.2 Power Supply Installation .................................................................................. 4

2.3 Motherboard Installation..………………………………………………… ............................ 4

2.4 Flexi-Drive Bay System………….………………………………………… ............................... 5

2.5 Internal 3.5” Devi e Installation…………………………………………. ........................... 5

2.6 External 3.5” Devi e Installation………………………………………… ............................ 6

2.7 External 5.25” Devi e Installation………………………………………. ........................... 6

2.8 Internal 2.5” Devi e Installation…………………………………………. ........................... 7

2.9 Cable Management Compartment……………………………..………............................ 7

2.10 Water Cooling Platform…………………………………………………… .............................. 8

2.11 Three-Way SLI Configuration Option…………………………………… .......................... 8

Connecting the Front I/O Ports

3.1 USB 2.0 Ports………………………………………………….…………… .................................. 8

3.2 USB 3.0 Port…………………………………….………………………….. .................................. 8

3.3 AC’97 / HD Audio Ports……………………….…………………………. ................................ 9

3.4 Power Swit h / Reset Swit h / Hard Disk Drive LED Conne tors…. ................... 9

3.5 Rewiring Motherboard Header Conne tions…………………………… ...................... 10

Cooling System

4.1 Big Boy 200 mm TriCool™ Fan………………………………………….. ............................. 10

4.2 Front/Rear TriCool™ LED Fans …………………………………………. ............................. 11

4.3 Optional Fans.………………………………………………………………. ................................. 12

4.4 Washable Air Filters………………………………………..……………… ............................... 13

Congratulations on your pur hase of the Nine Hundred Two V3!

The best-selling Ante Nine Hundred offers gamers an unbeatable en losure, one that delivers a

ombination of ooling, performan e and onvenien e and stands head and shoulders above the

ompetition. The Nine Hundred Two V3 builds on this design, adding a CPU utout, internal bottom-

mounted 2.5” SSD drive bay and front USB 3.0 port. We know your gaming hardware produ es a lot of

heat, so we’ve built this ase for maximum ooling, with a perforated front bezel, three 120 mm fans

with mounts for even more fans and a monster top-mounted 200 mm fan.

The Nine Hundred Two V3 omes without a power supply. Make sure you hoose a power supply that is

ompatible with your omputer omponents and has a long enough power harness to rea h your

motherboard and peripheral devi es. We re ommend our High Current Gamer or High Current Pro

power supplies for the latest ATX spe ifi ation omplian e, broad ompatibility, and power-saving

apability.

At Ante , we ontinually refine and improve our produ ts to ensure the highest quality. It’s possible

that your new ase will differ slightly from the des riptions in this manual. This isn’t a problem; it’s

simply an improvement. As of the date of publi ation, all features, des riptions, and illustrations in this

manual are orre t.

Disclaimer: This manual is not designed to over CPU, RAM, or expansion ard installation. Please

onsult the motherboard manual for spe ifi mounting instru tions and troubleshooting. Before

pro eeding, he k the manual for your CPU ooler to find out if there are steps you must take before

installing the motherboard. While installing hardware, keep your ase on a flat, stable surfa e.

1.1 Case S ecifications

Case Type

Mid Tower

Color

Bla k

Dimensions

19.3” (H) x 8.7” (W) x 18.5” (D)

493 mm (H) x 218 mm (W) x 472 mm (D)

Weight

25.4 lbs / 11.5 kg

Cooling

1 x Top

200 mm

TriCool™ Blue LED 3

speed Fan

2 x Front 120 mm Blue LED Fan with Front Control Knobs

1 x Rear 120 mm TriCool™ Blue LED 3-speed Fan

1 x Side 120 mm Fan Mount (Optional)

1 x Middle 120 mm Fan Mount (Optional)

Drive Bays

Drive Bays:

-Up to 9 x External 5.25” Drive Bays

-Up to 6 x Internal 3.5” Drive Bays

-1 x External 3.5” Drive Bay Bra ket (Optional)

-1 Internal bottom-mounted 2.5” SSD drive

Expansion Slots 8 expansion slots to support three-way SLI onfiguration

Motherboard Size

Mini-ITX, mi roATX, Standard ATX

Front I/O Panel

2 x USB 2.0

1 x USB 3.0

AC’97/HD Audio In and Out

1.2 Diagram

1. 120 mm rear TriCool™ fan

2. 200 mm top TriCool™ fan

3. 2 front 120 mm fans with

front ontrol knobs

4. 1 middle 120 mm fan bra ket

5. Washable air filters

6. Motherboard mount

– Mini-ITX, mi roATX or

Standard ATX

7. CPU utout

8. Power supply mount

9. 9 total 5.25” drive bays

10. Re onfigurable 3.5” drive

ages

11. Internal 2.5” SSD drive bay

12. Front I/O panel

13. 8 expansion slots (Three-way SLI apable)

9/10

Hardware Installation Guide

2.1 Setting U

1. Pla e the ase upright on a flat, stable surfa e so that the rear panel (power supply and expansion

slots) is fa ing you.

2. Remove the panel thumbs rews from the side panel and open it by sliding it towards you.

Note: Pla e the panel thumbs rews arefully aside as they are NOT inter hangeable with the HDD

age thumbs rews.

3. Remove the panel thumbs rews from the other side panel and open it by sliding it towards you.

Pla e the s rews arefully aside. Inside the ase is the power supply mount at the lower rear of the

ase and the 5.25” drive bay area with two HDD ages inside the bays. You will also find some wiring

with marked onne tors (USB, PWR et .), an installed I/O panel and a toolbox ontaining more

hardware (s rews, brass standoffs, et .).

Note: Don’t use your fingernails to pry or lift the panels.

2.2 Power Su ly Installation

1. With the ase upright, pla e the power supply on

the four sili one pads on the bottom of the ase.

Note: Power supplies will need to be mounted

so that the PSU fan is fa ing the top of the ase.

Nine Hundred Two V3 provides mounting holes for

power supplies with standard mounting layouts

to be installed upside up or upside down.

2. Push the power supply to the ba k of the ase and

align the mounting holes.

3. Atta h the power supply to the ase with the s rews

provided.

2.3 Motherboard Installation

1. Lay the ase down so that the open side is up.

2. Make sure you have the appropriate I/O panel

for the motherboard. If the panel provided is not

suitable for the motherboard, please onta t

the motherboard manufa turer for the orre t

I/O panel.

3. Line up the motherboard with the standoff

holes. Determine whi h holes line up and

remember where they are. Not all motherboards

will mat h with all of the provided s rew holes,

and this is not ne essary for proper

fun tionality. Some standoffs may be pre-

installed for your onvenien e.

4. Lift up and remove the motherboard.

5. S rew in the brass standoffs to the threaded

holes that line up with the motherboard.

6. Pla e the motherboard on the brass standoffs.

S rew in the motherboard to the standoffs with

the provided Phillips-head s rews.

2.4 Flexi-Drive Bay System

The Nine Hundred Two V3 omes with nine 5.25” external drive bays at the front of the ase. There are

three HDD ages pre-installed inside the bottom six 5.25” bays. Ea h HDD age o upies three

onse utive 5.25” drive bays and an house three hard disk drives. For maximum flexibility you an

mount the HDD age anywhere within the external drive bays (i.e., you are not limited to the bottom six

bays).

Possible drive bay ombinations in lude but are not limited to:

• External 3 x 5.25” + internal 6 x HDD

• External 6 x 5.25” + internal 3 x HDD

• External 9 x 5.25”

There is a middle fan bra ket pre-installed on one of the HDD ages. You an install a 120 mm fan to the

bra ket so the air will be blown into the ase to use the HDD age as a ooling du t to ool your graphi s

ard or CPU. This will prevent the installation of hard drives into this age, however. Remove the middle

fan bra ket from the HDD age if you de ide to mount your hard drives into this age.

• External 3 x 5.25” + internal 3 x HDD + ooling du t

2.5 Internal 3.5” Device Installation

1. Remove both side panels per the instru tions in Setting Up.

2. Remove the age thumbs rews fastening the HDD age to

the frame.

3. Slide the HDD age forward out of the front of the ase.

4. Mount the hard drive in the drive age and fasten it using

the long s rews provided.

5. Slide the HDD age ba k into the ase and fasten it with

thumbs rews.

6. Conne t the appropriate onne tor(s) from the power supply

to the devi e(s). Leave some sla k in the onne tions so that

you an easily a ess the fan filters for leaning.

7. There is a 120 mm fan pre-installed into ea h age. Conne t

the 4-pin onne tor to the power supply.

Note: There is a middle fan bra ket pre-installed on one of

the HDD ages. Remove it from the age if you de ide to

mount your hard drives into this age.

2.6 External 3.5” Device Installation

1. Remove both side panels per the instru tions

in Setting Up.

2. Remove the drive bay over from the drive bay

you wish to install an external 3.5” drive into.

3. Install your external 3.5” devi e into the adapter.

4. Slide the drive adapter/devi e assembly into the bay.

5. S rew the adapter to the drive age.

6. Mount the fa eplate and se ure it with s rews.

2.7 External 5.25” Device Installation

Note: The HDD ages ea h o upy three onse utive

drive bays, and will blo k installation of larger devi es

su h as opti al drives, so please plan ahead before

installing your drives.

1. Remove both side panels per the instru tions in

Setting Up.

2. Remove the s rews fastening the appropriate metal

drive bay over(s) to the sides of the ase.

3. Remove the over(s).

4. If ne essary, please remove the HDD age that is

pre-installed in the bay.

5. Slide the 5.25” devi e into the bay from the front of

the ase.

6. Fasten the drive using the s rews that ame with your

drive.

7. Conne t the appropriate power and interfa e onne tors

from the power supply and motherboard to the devi e.

Make sure that you leave some sla k in the onne tions

so that you an easily a ess the fan filters for leaning.

8. Mount the other devi es a ordingly.

2.8 Internal 2.5” Device Installation

At the bottom of your ase, there are mounting holes designed to support one 2.5” SSD devi e.

1. Lo ate the plasti bag labeled “For 2.5 HDD” and

remove the 4 sili one grommets.

2. Install the grommets into the four holes at the

base of the ase at the bottom of the drive bay

area as shown. You should install them with the

thi k part of the grommets fa ing the inside of

the ase.

3. Lay the Nine Hundred Two V3 on its side, and

hold the drive in pla e on top of the grommets.

4. Se ure the devi e to the ase with the s rews

provided, tightening the s rews with your fingers

first, and then the s rewdriver.

5. Conne t the appropriate power and data ables

to your devi e

2.9 Cable Management Com artment

There is a able management ompartment between the motherboard and right side panel. You an

tu k or route ex ess ables in this ompartment.

1. Remove both side panels.

2. Choose the ables you would like to pass through the holes behind the motherboard tray and pull

them out of the power supply hamber towards the right side of the ase.

3. Use the able ties provided to hold them in pla e.

4. Feed the ables ba k through the insertion point nearest the destination of the able. Conne t the

able and then pull the sla k ba k to the right side of the ase.

Signal

Names

Signal

Names

USB

Power

USB

Power

Negative

Signal

Negative

Signal

Positive

Signal

Positive

Signal

Ground

Key

(No

Connection)

Empty

2.10 Water Cooling Platform

This ase omes with a 5.25” metal plate pre-installed in the 3rd 5.25” drive bay. This plate is designed

to allow you to easily mount omponents of a water- ooling kit su h as a pump or reservoir. The plate

an be mounted in any of the nine 5.25” drive bays for maximum flexibility.

Note: The plate is not pre-drilled. You will need to drill the appropriate holes to be ompatible with

your water- ooling kit.

2.11 Three-Way SLI Configuration O tion

The Nine Hundred Two V3 has eight expansion slots, making it apable of supporting up to three

graphi s ards in triple-SLI onfiguration. Consult your motherboard and graphi s ards manuals for

more information.

Conne ting the Front I/O Ports

3.1 USB 2.0

Conne t the front I/O panel USB able to the USB header pin on your motherboard. Che k the

motherboard manual to ensure that it mat hes the table below:

3.2 USB 3.0

There is a pre-routed able for the front-panel USB 3.0 port. Plug the ba k end of this able into an on-

board USB 3.0 port on your motherboard to enable the front USB 3.0 port.

1 2

9 10

Signal

Names

(HDA)

Signal

Names

(AC’97)

MIC2

MIC In

AGND

GND

MIC2

MIC Power

AVCC

FRO-R

Line

Out

(R)

MIC2_JD

Line

Out

(R)

F_IO_SEN

Key (no pin)

FRO-L

Line

Out

(L)

LINE2_JD

Line

Out

(L)

3.3 AC’97/HD Audio Ports

There is an Intel® standard 10-pin AC’97 onne tor and an Intel® 10-pin HDA (High Definition Audio)

onne tor linked to the front panel of the ase.

You an onne t either the AC’97 or the HDA onne tor, depending on the model of the motherboard.

Lo ate the internal audio onne tors from your motherboard or sound ard and onne t the

orresponding audio able. Consult your motherboard or sound ard manual for the pin-out positions.

Even if your system supports both audio standards, you may only use one onne tor.

3.4 Power Switch / Reset Switch / Hard Disk Drive LED Connectors

Conne ted to your front panel are LED and swit h leads for power,

reset, and HDD LED a tivity. Atta h these to the orresponding

onne tors on your motherboard. Consult your motherboard

manual for spe ifi pin header lo ations. For LEDs, olored wires

are positive ( + ). White or bla k wires are negative ( – ). If the LED

does not light up when the system is powered on, try reversing the

onne tion. For more information on onne ting LEDs to your

motherboard, see your motherboard manual.

Note: Polarity (positive and negative) does not matter for swit hes. There is also no Power LED in this

ase. The illuminated ase fans will turn on when there is power to the omputer.

Andere Antec Gehäuse Handbücher

Antec

Antec P190 Bedienungsanleitung

Antec

Antec VERIS MX-1 Bedienungsanleitung

Antec

Antec Performance TX635 Bedienungsanleitung

Antec

Antec GX300 Bedienungsanleitung

Antec

Antec Ruby / Sapphire Bedienungsanleitung

Antec

Antec 900 Bedienungsanleitung

Antec

Antec Super LANBOY Bedienungsanleitung

Antec

Antec Super LANBOY Bedienungsanleitung

Antec

Antec ISK 100 User's Bedienungsanleitung

Antec

Antec Solution SLK3700AMB Bedienungsanleitung

Antec

Antec VERIS MX-100 Bedienungsanleitung

Antec

Antec SONATA III 500 Bedienungsanleitung

Antec

Antec P160 Bedienungsanleitung

Antec

Antec Veris Fusion Remote Max Bedienungsanleitung

Antec

Antec SONATA IV Bedienungsanleitung

Antec

Antec Solution SLK1650 User's Bedienungsanleitung

Antec

Antec 902 Bedienungsanleitung

Antec

Antec Veris Fusion Remote Max Bedienungsanleitung

Antec

Antec Signature Series Bedienungsanleitung

Antec

Antec P150 Bedienungsanleitung

Antec

Antec Nine Hundred Two Bedienungsanleitung

Antec

Antec P190 Bedienungsanleitung

Antec

Antec Minuet Bedienungsanleitung

Antec

Antec Mini P180 White Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung