AOpen AX4BR-U Bedienungsanleitung

PS/2 Mouse

Connector SPP/EPP/ECP Parallel Port

LAN Ports

PS/2 Keyboard

Connector USB Ports

COM 1 Port VGA Port

SYSFAN1 Connecto

RAID IDE2 Connecto

Front Panel Connecto

FDD Connecto

2nd USB Connecto

JP14 CMOS Clear Jum

4Mbit Flash ROM

Resetable Fuse

478-pin CPU socket with Voltage and

Frequency Auto-detection that supports

Intel®Pentium®4 1.4~2.8GHz+ CPU

32-bit PCI Expansion Slot x5

CPUFAN Connector

184-pin DIMM Socket x2 supports

PC-200/266 DDR SDRAM

maximum up to 2 GB

Intel

845E chipset

2200μF Low ESR Capacitors

TX Power Connecto

4-pin 12V. ATX Power Connector

COM2 Connecto

RAID IDE1 Connecto

WOL Connecto

TA/33/66/100 IDE Connector x2

SYSFAN2 Connector

(AOpen reserves the right to revise all

the specifications and information

contained in this documentation which

is subject to change without notice.)

This motherboard comes with a 20-pin and 4-pin ATX power connector as shown below. Make sure you plug

in the right direction. We strongly recommend you to insert the 4-pin connector before connecting the 20-pin

connector.

1. JP14 Clear CMOS

Everything you need to boot this

motherboard is included in this

Easy Installation Guide. For more

information, a complete Online

User's Manual can be found in the

Bonus Pack CD. Thanks for the

help of saving our earth.

PART NO: 90.51Q30.001 DOC. NO: AX4BRU-EG-E0209B

You can clear CMOS to restore system default setting. To

clear the CMOS, follow the procedure below.

1. Turn off the system and unplug theAC power.

2. RemoveATX power cable from connector PWR2.

3. Locate JP14 and short pins 2-3 for a few seconds.

4. Return JP14 to its normal setting by shorting pin 1 & pin 2.

5. ConnectATX power cable back to connector PWR2.

Tip: When should I Clear CMOS?

1. Boot fail because of overclocking…

2. Forget password…

3. Troubleshooting…

2. Connecting ATX Power Connector

This Motherboard x1

This Easy Installation Guide x1

User Manual x 1

80-wire IDE Cable x2

Floppy Disk Drive Cable x1

COM2Cablex1

I/O Port Bracket x1

Bonus Pack CD x1

NORTON AntiVirus CD x1

Assembly Screw Pack x1

Pin 1

Normal

(

default

)

Clear CMOS

1. Pull up the CPU socket lever and up to

90-degree angle.

2. Locate Pin 1 in the socket and look fo

a (golden) cut edge on the CPU uppe

interface. Match Pin 1 and cut edge.

Then insert the CPU into the socket.

3. Press down the CPU socket lever and

finish CPU installation.

Plug in the CPU fan cable to the 3-pin CPU FAN connector. If you have chassis fan, you

can also plug it on SYSFAN2 or FAN3 (AUX Fan) connector.

5. Installing DIMM Module

This motherboard has two 184-pin DDR DIMM sockets that allow you to install DDR200 o

DDR266 memory up to 2GB.

3. Installing Processor

Note: If you do not match the CPU

socket Pin 1 and CPU cut edge well, it

may damage the CPU.

CPU socket lever CPU cut edge

Note: Some CPU fans do not have

sensor pin so they cannot support fan

monitoring.

CPUFAN Connector

4. Installing CPU & System Fan

SYSFAN1 Connector

This socket supports Micro-FC-PGA2 package CPU, which is the latest CPU package

developed by Intel. Other forms of CPU package are impossible to be fitted in.

SYSFAN2 Connector

GND

+12V

SENSOR

GND

SENSOR +12V

GND

+12V

SENSOR

DIMM1

DIMM2

6. Installing CPU & System Fan

Connect 34-pin floppy cable and 40-pin IDE cable to floppy connector FDC and IDE

connector. Pin1 of cable is normally marked with red color. Addition to IDE connectors, we

also provide two RAID IDE connectors for you to connect RAID. Be careful of the pin1

orientation. Wrong orientation may cause system damage.

IDE Secondary (2nd)

IDE Primary (1st)

ATA 66/100 IDE

Connector

FDD Connector

RAID secondary

channel

RAID primar

channel

RTS#

RI#

GND

SOUT

DCD#

USBPWR0

USB_FP_P0-

USB_FP_P0+

GND

USBPWR0

USB_FP_P1-

USB_FP_P1+

GND

1 2

9. Connecting WOL

10. Connecting Front Panel Cable

8. Connecting COM2 Connector

This motherboard comes with a COM1 connector on the back panel. However, we provide

an extra COM2 connector for your convenience. Once you need to connect a device via

COM2, just connect a suitable cable on it.

To use Wake On LAN function, you must have a network card with chipset that supports

this feature, and connect a cable from LAN card to motherboard WOL connector. The

system identification information (probably IP address) is stored on network card and

because there is a lot of traffic on the Ethernet, you need to install network managemen

software, such as ADM, for the checking of how to wake up the system. Note that, at least

600mAATX standby current is required to support the LAN card for this function.

Attach the power LED, speaker, and reset switch connectors to the corresponding pins. If

you enable “Suspend Mode” item in BIOS Setup, the ACPI & Power LED will keep

flashing while the system is in suspend mode.

Locate the power switch cable from your ATX housing. It is 2-pin female connector from

the housing front panel. Plug this connector to the soft-power switch connector marked

SPWR.

7. Support 2nd USB Port

This motherboard provides four USB connectors to connect USB devices, such as mouse,

keyboard, modem, printer, etc. There are two connectors on the PC99 back panel. You can

use proper cable to connect the other USB connector to the back panel or front panel o

chassis.

USB2 Connector

Pin 1

CTS#

DSR#

DTR#

SIN 2 1

WOL Connecto

LID

GND

+5VSB

IDE LED

+5V

GND

INTRUDER

PWR BN

GND

CPILED-

GND

CPILED

+5V

GND

SPEAKER

GND

RESET

GND

ATX_ON

GND

Power

Switch

CPI &

Power LED

RESET

SPEAKER IDE LED

13. PC99 Color Coded Back Panel

11. STBY LED

STBY LED is AOpen’s considerate design that we aim at providing you friendly system

information. The STBY LED will light up when power is provided to the motherboard. This is

a convenient indication for you to check the system power status in many circumstances

such as power on/off, stand-by mode and RAM power status during Suspend to RAM

mode.

The onboard I/O devices are PS/2 Keyboard, PS/2 Mouse, COM1, VGA port, Printer, USB, and

LAN ports. The view angle of drawing shown here is from the back panel of the housing.

14. Enlarged Aluminum Heatsink

12. Support 10/100Mbps LAN Onboard

The Intel 82551QM includes a fast Ethernet controller on chip. On the strength of this LAN

controller on board, which is a highly-integrated Platform LAN Connect device, it provides

10/100M bps Ethernet for office and home use, the Ethernet RJ45 connector is located on

top of USB connectors. The green LED indicates the link mode, it lights when linking to

network and blinking when transferring data. The orange LED indicates the transfer mode,

and it lights when data is transferring in 100Mbps mode. To enable or disable this function,

you may simply adjust it through BIOS.

Cool down CPU and Chipset is important for system reliability. Enlarged aluminum heat sink

provides better heat consumption especially when you are trying to over clocking the CPU.

System

Power LED

Warning: Do not install or

remove the DIMM module

or others devices when the

STBY LED lights on.

Green/ACT

Orange/Speed

100/10Mb Ethernet Port

PS/2 Mouse

Connector

PS/2 Keyboard

Connector

USB

Connectors

SPP/EPP/ECP

Parallel Port

VGA Port

COM 2 Port

LAN Port LAN Port

PS/2 Keyboard: For standard keyboard, which is using a PS/2 plug.

PS/2 Mouse: For PC-Mouse, which is using a PS/2 plug.

USB Port: Available for connecting USB devices.

Parallel Port: To connect with SPP/ECP/EPP printer.

COM1/COM2 Port: To connect with pointing devices, modem or others serial devices.

VGA Connector: To connect with PC monitor.

fter you finish the setting of jumpers and connect correct cables. Power on

and enter the BIOS Setup, press <Del> during POST (Power On Self Test).

Choose "Load Setup Defaults" for recommended optimal performance.

15. Power-on and Load BIOS Setup

16. Installing Intel INF Utility 18. Model name and BIOS version

Model name and BIOS version can be found on upper left corner of first boot screen

(POST screen). For example:

17. Installing Intel IAA Driver

Windows 95/98 cannot recognize this chipset, because it was released before the Intel

845E chipset. You can install the Intel INF Update Utility from the Bonus Pack CD auto-run

menu to eliminate the “?” marks.

Del

You can install Intel IAA Driver to increase the performance of software applications and

reduce PC boot times. You can find it in the AOpen Bonus Pack CD.

AX4BR-U R1.02 Sep. 01. 2002

AX4BR is model name of motherboard; R1.02 is BIOS version

If you encounter any trouble to boot you system, follow the procedures

accordingly to resolve the problem.

Part Number and Serial Number

The Part Number and Serial number are printed on bar code label. You can find this bar

code label on the outside packing or on component side of PCB. For example:

Make sure if the jumper settings for CPU and DRAMs are correct.

Clear CMOS.

Install the VGA card. Then connect your monitor and keyboard.

The problem was probably caused

by power supply or motherboard

failure. Please contact your reselle

or local distributor for repairing.

Perhaps your VGA card or monito

is defective.

Yes

It is very possible that your keyboard

is defective.

During system rebooting, press Del to enter BIOS Setup. Choose

“Load Setup Default".

The problem should be caused by the

IDE cables or HDD itself.

Re-install Windows 95, Windows 98 or Windows NT.

Yes

Turn off the power and unplug the AC power cable, then remove all

of the addon cards and cables, including VGA, IDE, FDD, COM1,

COM2 and Printer.

Turn on the power, and check if

the power supply and CPU fan

work properly.

Start

Check if there is display.

Press Ctrl, and Alt key at the

same time, hold them and then

press Del to see if the

stem reboots.

Turn off the system and

re-connect the IDE cable.

Check if the system can

reboot successfully.

End

P/N: 91.88110.201 is part number, S/N: 91949378KN73 is serial number.

Part No. Serial No.

Dear Customer,

Thanks for choosing AOpen products. To provide the best and fastest service to

our customer is our first priority. However, we receive numerous emails and

hone-calls worldwide everyday, it is very hard for us to serve everyone on time.

We recommend you follow the procedures below and seek help before contact

us. With your help, we can then continue to provide the best quality service to

more customers.

Thanks very much for your understanding!

Open Technical Supporting Team

Online Manual: Please check the manual carefully and make sure the

jumper settings and installation procedure are correct.

http://english.aopen.com.tw/tech/download/manual/default.htm

Test Report: We recommend to choose board/card/device from the

compatibility test reports for assembling your PC.

http://english.aopen.com.tw/tech/report/default.htm

FAQ: The latest FAQ (Frequently Asked Questions) may contain a

solution to your problem.

http://english.aopen.com.tw/tech/faq/default.htm

Download Software: Check out this table to get the latest updated

BIOS/utility and drivers.

http://english.aopen.com.tw/tech/download/default.htm

News Group: Your problem probably had been answered by our support

engineer or professional users on the news group.

http://english.aopen.com.tw/tech/newsgrp/default.htm

Contact Distributors/Resellers: We sell our products through resellers

and integrators. They should know your system configuration very well and

should be able to solve your problem efficiently and provide important

reference for you if next time you want to buy something else from them.

before contacting us. The part number, serial number and BIOS version

are also very helpful.

Pacific Rim

AOpen Inc.

Tel: 886-2-3789-5888

Fax: 886-2-3789-5899

America

AOpen America Inc.

Tel: 1-510-489-8928

Fax: 1-510-489-1998

Europe

AOpen Computer b.v.

Tel: 31-73-645-9516

Fax: 31-73-645-9604

Germany

AOpen Computer GmbH.

Tel: 49-1805-559191

Fax: 49-2102-157799

China

艾爾鵬國際貿易(上海)有限公司

Tel: 86-21-6225-8622

Fax: 86-21-6225-7926

Japan

AOpen Japan Inc.

Tel: 81-048-290-1800

Fax: 81-048-290-1820

Web Site: http://www.aopen.com.tw

E-mail: Send us email by going through the contact form below.

English http://english.aopen.com.tw/tech/default.htm

Japanese http://www.aopen.co.jp/tech/default.htm

Chinese http://www.aopen.com.tw/tech/default.htm

German http://www.aopencom.de/tech/default.htm

Simplified Chinese http://www.aopen.com.cn/tech/default.htm

Andere Handbücher für AX4BR-U

Inhaltsverzeichnis

Andere AOpen Hauptplatine Handbücher

AOpen

AOpen DX6G Plus Bedienungsanleitung

AOpen

AOpen AX4SP Einrichtungshandbuch

AOpen

AOpen AK77-600N Bedienungsanleitung

AOpen

AOpen AX4PE Max Einrichtungshandbuch

AOpen

AOpen AX4B Max Datenblatt

AOpen

AOpen MX3S Einrichtungshandbuch

AOpen

AOpen i855GMEm-LFS Bedienungsanleitung

AOpen

AOpen AXPS-U Bedienungsanleitung

AOpen

AOpen MX3W Pro Einrichtungshandbuch

AOpen

AOpen MK79 Bedienungsanleitung

AOpen

AOpen AX6BC EZ Bedienungsanleitung

AOpen

AOpen AX34 Pro II Einrichtungshandbuch

AOpen

AOpen MX4SGI-4DN Einrichtungshandbuch

AOpen

AOpen AK73(A)-V Datenblatt

AOpen

AOpen i915Ga-E Bedienungsanleitung

AOpen

AOpen I915GAPLF-0410A Bedienungsanleitung

AOpen

AOpen AK79G-V Datenblatt

AOpen

AOpen AK72 Einrichtungshandbuch

AOpen

AOpen AX45-8X Max Einrichtungshandbuch

AOpen

AOpen MX3W Pro Einrichtungshandbuch

AOpen

AOpen AX45-533 PLUS Einrichtungshandbuch

AOpen

AOpen AX4B Max Datenblatt

AOpen

AOpen AX4BS Pro Einrichtungshandbuch

AOpen

AOpen Fortress 7000 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung