Apogee NAVIK 100 Bedienungsanleitung

User Guide

Version –1.0

November 2021

NAVIK 100

GNSS Receiver

Corporate office

G-177, Sector 63

Noida, 201301, Uttar Pradesh

Website: http://www.apogeegnss.com/

Email: sales@apogeegnss.com

No: 7624002254

This is the V1.0 (Oct, 2021) revision of the NAVIK 100 GNSS Receiver User Guide. It cannot be

copied or translated into any language without the written permission of Apogee GNSS Pvt Ltd.

Technical Assistance

If you have any question and can't find the answer in this manual, please contact your local dealer

from which you purchased the NAVIK 100 GNSS Receiver. Alternatively, request technical support

from Apogee GNSS Pvt Ltd Website: https://www.apogeegnss.com/

Safety Information

Before using the receiver, please make sure that you have read and understood this user Guide, as

well as the safety requirements.

Connect your devices strictly based on this User guide.

Install the GNSS receiver in a location that minimizes vibration and moisture.

Avoid falling to ground, or colliding with other items.

Do not rotate 7-pin Lemo port.

Do not cover the radio, keep a sound ventilation environment.

To reduce radiation, please keep above 2 meters away from the radio station.

Take lighting protection measures when installing antennas.

Change the cable if damaged.

Related Regulations

The receiver contains integral Bluetooth® wireless technology and UHF. Regulations regarding the

use of the datalink vary greatly from country to country. In some countries, the unit can be used

without obtaining an end-user’s license. But in some countries the administrative permissions are

required. For license information, please consult your local dealer.

Use and Care

The receiver can withstand the rough treatment that typically occurs in the field. However, the

receiver is high-precision electronic equipment and should be treated with reasonable care.

Warning and Caution

An absence of specific alerts does not mean that there are no safety risks involved. A Warning or

Caution information is intended to minimize the risk of personal injury and/or damage to the

equipment.

WARNING- A Warning alerts you to a potential risk of serious injury to your person and/or damage

to the equipment, because of improper operations or wrong settings of the equipment.

CAUTION- A Caution alerts you to a possible risk of damage to the equipment and/or data loss.

Warranty Notice

Apogee GNSS Pvt Ltd does not warranty devices damage because of force majeure (lighting,

high voltage or collision).

Apogee GNSS Pvt Ltd does not warranty the disassembled devices.

CONTENTS

1Introduction.................................................................................................................6

1.1 About the Receiver........................................................................................6

1.2 Receiver Features..........................................................................................6

1.3 NAVIK 100 Receiver Parts List........................................................................6

1.3.1 Basic Supply Kit...............................................................................7

2 Setting Up the Receiver................................................................................................8

2.1 Environmental Requirements........................................................................8

2.2 Front Panel.....................................................................................................8

2.3 Lower Housing................................................................................................9

2.4 Power Supply..................................................................................................9

2.4.1 Internal Battery................................................................................9

2.4.2 External Power Supply....................................................................10

2.5 Pole-Mounted Setup.....................................................................................10

3General Operation.......................................................................................................10

3.1 Button Functions...........................................................................................11

3.2 LED Behavior..................................................................................................11

4 Static Survey…………………………………………………………………………………………………………....12

4.1 Receiver Configuration..................................................................................12

4.2 Static Data Collection.....................................................................................12

4.3 Static Data Download.....................................................................................13

4.4 RINEX Convert................................................................................................13

5 Real Time Kinematic Survey (RTK)................................................................................14

5.1 Installation of Geo Master Survey App...........................................................14

5.2 Wizard Function in Geo Master......................................................................14

5.3 Start a New Project.........................................................................................17

5.4 Bluetooth Connection.....................................................................................18

5.5 Internal Radio Mode.......................................................................................19

5.5.1 Start Base Station by Geo Master Survey App.................................20

5.5.2 Start Rover Station by Geo Master Survey App...............................21

5.6 External Radio................................................................................................23

5.7 Internal GPRS Mode.......................................................................................23

5.7.1 Internal 4G.......................................................................................24

6Basic Survey Function...................................................................................................24

6.1 Topo Survey....................................................................................................24

6.2 Auto Survey/Area Survey...............................................................................25

6.3 Stake points/lines..........................................................................................26

6.4 PPK................................................................................................................26

6.5 Site Calibration/Grid Reset............................................................................27

6.5.1 Site Calibration................................................................................27

6.6 Area Calculation and COGO............................................................................27

7Data Export/Import.......................................................................................................27

7.1 Import.............................................................................................................27

7.2 Export.............................................................................................................28

7.3 NMEA 0183 Output................................................................................................29

1 Introduction

The NAVIK 100 GNSS Receiver User Guide is aimed to help you get familiar with the NAVIK 100

Receiver and start your project effectively. We highly recommend you to read this manual before

surveying.

1.1 About the Receiver

NAVIK 100 GNSS Receiver can be applied in RTK mode with all GNSS constellations. NAVIK 100

Receiver has ultra-small size and strong anti-interference ability to make it possible to work even in

harsh environments. It is the ideal RTK/GNSS product for surveyors.

1.2 Receiver Features

The NAVIK 100 GNSS Receiver key features:

Ultra small and super light

- Size (W × H): 140 mm × 99 mm

- Weight: 850 g

184 channels of simultaneously tracked satellite signals

Cable-free Bluetooth wireless technology

Keypad with on/off buttons and LED indicators for power, radio,

WiFi/GPRS, and satellite tracking

IP67 waterproof and dustproof

Full base/rover interoperability

Integrated receiving & transmitting radio with 12.5KHz frequency interval

Integrated 4G module, support Ntrip and Point to Point/Points protocols

1.3 NAVIK 100 Receiver Parts List

This section provides overall NAVIK 100 receiver parts list, including basic supplies and customized

kits based on your requirements.

1.3.1 Basic Supply kit

NAVIK 100 GNSS Receiver Basic Supply kit contains two receivers and related accessories.

1. NAVIK 100 GNSS Receiver

2. RF Antenna

3. D-45 Data Collector

4. Lemo to DB9 Cable

5. Adapter

6. Quick start guide

7. Survey Pole

8. Power Supply

2 Setting up the receiver

This chapter provides general information on environmental requirements, setup,

power supply and connection of the NAVIK 100 receiver.

2.1 Environmental requirements

To keep the receiver with a reliable performance, it is better to use the receiver in

safe environmental conditions:

Operating temperature :0 °C to + 50 °C

Storage temperature :-10 °C to + 60 °C

Humidity : 90%

Waterproof and dustproof : IP67

Shock : Designed to withstand upto 2 m drop

2.2 Front panel

Receiver front panel contains five indicator light emitting diodes (LEDs), Power

button. The indicator LEDs show the status of power, Satellite Tracking, GPRS Status and

Differential Data.

2.3 Lower housing

Receiver lower housing contains a serial port, UHF radio antenna connector, one

removable battery compartments (the SIM card slot is located in compartment),

and a threaded insert.

2.4 Power supply

NAVIK 100 GNSS receiver supports internal battery and external power input.

2.4.1 Internal battery

The receiver is equipped with one rechargeable Lithium-ion battery, which can be

removed for charging. The NAVIK 100 receiver adopts the hot swap battery design that provides

you an effective survey workflow. Receiver is powered by high capacity 6800 mAh Li-ion battery. Its

operating time depends on that it is working as a rover or as a base station with internal UHF Tx

(transmit at 1 W adjustable). And, this operating time also varies based on environmental

conditions.

Battery Safety

Charge and use the battery only in strict accordance with the instructions below:

Do not use or charge the battery if it appears to be damaged. Signs of damage include, but

are not limited to, discoloration, warping, and leaking battery fluid.

Do not expose the battery to fire, high temperature, or direct sunlight.

Do not immerse the battery in water.

Do not use or store the battery inside a vehicle during hot weather.

Do not drop or puncture the battery.

Do not open the battery or short-circuit its contacts.

Charging the Lithium-ion Battery

Although a battery charger is provided, the lithium-ion battery is supplied partially charged. To

charge the battery, first remove the battery from the receiver, and then place it in the battery

charger, which is connected to AC power. Please obey the following instructions when charging

your batteries:

Charge the battery completely before using it for the first time.

Fully charge takes approximately 6-8 hours at room temperature.

If the battery has been stored for a long time, charge it before your field work.

Re-charge the battery at least every three months if it is to be stored for long

time.

Storage of the Lithium-ion Battery

Do not keep batteries inside the receiver if the receiver not used for long time.

Keep batteries in dry conditions.

Take out the batteries from receiver for shipment.

Dispose of the Lithium-ion Battery

Discharge a Lithium-ion battery before dispose of it.

Dispose of batteries is an environmentally sensitive manner, and adhere to any local and

national regulations concerning battery disposing or recycling.

WARNING –Do not damage the rechargeable Lithium-ion battery. A damaged battery can cause an

explosion or fire, and can result in personal injury and/or property damage.

2.4.2 External Power Supply

The receiver is connected to an external power supply through a lemo to RS232 cable, and make

sure that the red alligator clip is connected to the positive of external power supply, black one to

negative. Over-voltage function cannot protect your NAVIK 100 receiver if reverse connection.

2.5 Pole-mounted setup

To mount the receiver on a range pole as the figure shown below:

Thread the receiver onto the range pole

Mount the controller bracket to the pole

Inhaltsverzeichnis

Andere Apogee Empfänger Handbücher

Apogee

Apogee NAVIK 200 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung