Arbor Technology Triple Wheelie Bin Storage Bedienungsanleitung

01945 410950

support@arborgardensolutions.co.uk

http://www.arborgardensolutions.co.uk

Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR

Triple Wheelie Bin Storage Assembly Instructions

Before you commence the assembly process, we recommend that you read these instructions

thoroughly beforehand to familiarize yourself with the assembly process and to also check that

you have the correct components. If for any reason you need assistance, you can find our

contact details on the top of page of these instructions.

We highly recommend that any assembly is carried out on a flat, level surface if possible and

that you use another person to assist you if necessary for your convenience all guide holes are

pre-drilled.

You can check our YouTube channel for assembly video.

Please click here

Package contents:

•3x Back panel

•3x Doors

•2x Side panels

•3x Roof

•3x Metal bards

•1x Back bar

•1x Front bar

•2x Spacer blocks

•1x Spacer bar

•2x Middle Section divider

•60mm screws

•85mm Screws

•32mm Black screws

•

Tools required:

Electric screwdriver with No2 Pozidrive

bit or No2 Pozidrive screwdriver

01945 410950

support@arborgardensolutions.co.uk

http://www.arborgardensolutions.co.uk

Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR

Step 1

Step 2

Step 3

Step 4

Stand the left-hand end panel upright on a flat,

level surface.

Arrange the 2 spacer blocks on the ground,

adjacent to the end panel, as shown in the photo

above. Using the 65mm screws provided, attach the

batten on the back panel to the post of the end

panel, ensuring that the batten remains vertically

aligned to the post fixing.

Now secure the right-side panel in place with 65mm

screws in the same manner as you attached the left

side panel. Repeat steps 1-3 to complete the rest of

the wheelie bin slots.

After attaching the last right-side panel, your

assembly should look like the one in the picture.

01945 410950

support@arborgardensolutions.co.uk

http://www.arborgardensolutions.co.uk

Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR

Step 5

Step 6

Step 7

Step 8

Now take the front bar and secure it with the

60mm screws as shown in the picture. Please don’t

forget to use the space bar (70cm) between the

posts to ensure that the gap is correct.

Carefully lay the assembly on its back and position

the metal bar as shown across the bottom of the

front posts. Use spacing block (70cm) on both slots

as shown to ensure the gap is the right size.

Place the roof batten section onto the store and

align with the edges of the posts. Secure with

provided 85mm screws.

Place the roofs sections onto the store and align to

the rear batten. Please note: One lid out of three is

smaller. Make sure it is fixed on a middle section.

01945 410950

support@arborgardensolutions.co.uk

http://www.arborgardensolutions.co.uk

Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR

Step 9

Step 10

Step 11

Step 12

Secure the roofs to the rear batten with the

provided black screws.

Arrange the two spacer blocks on the ground,

adjacent to the end front, as shown in the photo.

Use black screws to secure the doors.

Fit the hook to the opposite side of the doors from the

hinges to whichever height is the best for you with 2x black

screws. Don’t forget to attach the provided batten to the

other side of the doors while screwing in the black screws to

hide the pointy screw end’s sticking out of doors.

01945 410950

support@arborgardensolutions.co.uk

http://www.arborgardensolutions.co.uk

Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR

Step 13 Step 14

To fit the latch keeper plate, shut the door and hold the

latch in the horizontal position. Now fit the keeper and mark

its correct fixing position on the post using a pencil or

bradawl before securing it in place using the screws

provided.

Your Triple Wheelie Bin Store is now completed!

We hope that you found your product quick and easy to assemble but if not and

you require further assistance or have any questions you can contact us via details

above.

Also, you can check our YouTube channel for assemble videos, click on the link

below:

https://www.youtube.com/watch?v=u8NKqZ8Qvk4&t=236s

Type in YouTube search box Arbor Garden Solutions.

If you bought version with shelf –place shelf at your

required height and secure it with the provided screws.

Andere Arbor Technology Außenlagerung Handbücher

Arbor Technology

Arbor Technology Double Bay Bedienungsanleitung

Arbor Technology

Arbor Technology Triple Bay Log Store Handbuch

Beliebte Außenlagerung Handbücher anderer Marken

USP

USP DURAMAX 10 Ft x 8 Ft StoreMax Plus Bedienungsanleitung

TYGO

TYGO Nyland Bedienungsanleitung

Duratuf

Duratuf GL105 Bedienungsanleitung

Viking

Viking SD5300SS Technisches Handbuch

USP

USP DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116 Bedienungsanleitung

ModuLaro

ModuLaro Lojo WC202200 Bedienungsanleitung

Lifetime

Lifetime 6418 Bedienungsanleitung

rollaway container

rollaway container ARPCA24 Bedienungsanleitung

Duratuf

Duratuf Havelock Bedienungsanleitung

X-METAL

X-METAL 4065 Bedienungsanleitung

Outdoor Life Products

Outdoor Life Products FP2030 F Bedienungsanleitung

Royalcraft

Royalcraft Faro 295L Storage Box Bedienungsanleitung

Riverlea

Riverlea Duratuf KIWI KS3 Bedienungsanleitung

Rubbermaid

Rubbermaid 5L45 Bedienungsanleitung

garofalo

garofalo TUSCANY EVO Bedienungsanleitung

OLT

OLT GS84D-FJ-Plywood Bedienungsanleitung

Duratuf

Duratuf Kiwi MK1 Bedienungsanleitung

Eden

Eden CA2988 Bedienungsanleitung