ARC ARC FLEX Bedienungsanleitung

FLEX

User’s Manual

Table of Contents

Page

1. Introduction 2

2. Radio Controlled Safety 3

3. General System Information

A. Transmitter Handset

1. External Illustration 4

2. Internal Illustration 5

B. Receiver Unit

1. External Illustration 6

2. Internal Illustration 7

4. Function Settings

A. Transmitter Handset

1. System Channel Settings 8

2. Pushbutton Functions with LED Display Settings 9~13

B. Receiver Unit

1. System Channel Settings 13

2. Output Relay Configurations 14~15

3. Dip-switch Settings 16~17

4. Jumpers Settings 18

5. System Channels Table 19

6. Receiver Installation

A. Output Relay Contact Diagrams 20

B. Receiver Mounting

1. Pre-installation Precautions 21

2. Step-by-Step Installation 21~22

3. System Testing 22

7. Operating Procedure

A. Transmitter Operation 23

B. Status Light Indicators &Warnings

1. Transmitter STATUS Light Indication 24

2. Receiver STATUS Light Indication 25

3. Receiver SQ Light Indication 25

4. Receiver Power Light Indication 25

5. Receiver COM Light Indication 25

C. Trouble Shooting Tips 26

8. System Specification 27

9. Spare Parts 28

1. Introduction

The ARC FLEX radio remote control systems are designed for control of industrial equipment and

machinery such as overhead traveling cranes, jib cranes, gantry cranes, tower cranes, electric hoists, winches,

monorails, conveyor belts, mining equipment and other material handling equipment where wireless control is

preferred.

Each FLEX system consists of a transmitter handset and receiver unit. Other standard-equipped

accessories include transmitter waist belt, “AA”batteries, compass direction decal sheet and user’s manual.

List of notable features include:

*62 user-adjustable channels –no more fixed channels and fragile quartz crystals to break.

*Over one million sets of unique ID codes (20-bit) –unlike many other radio control systems on the

market, the FLEX system never repeats ID codes.

*Advanced microprocessor controls with 32-bit CRC and Hamming Codes programming –ultra fast,

safe, precise and error-free encoding and decoding.

*Ultra-durable transmitter push button –good for up to one million press cycles.

*Ultra power-saving transmitter –requires only two “AA”Alkaline or rechargeable batteries

(2000mA or above) for more than 100 hours of continuous operating time between replacements or

recharging.

*Ultra durable nylon and fiberglass composite enclosures –resist breakage from high impacts and

frequent drops; no more fragile casings to replace.

*100% water and shock resistant

*Adjustable waist belt for easy carry and operation.

2. Radio Controlled Safety

Flex radio remote control system should be operated by persons with sufficient amount of knowledge and

skill in crane operation and safety. Persons being trained to operate a radio remote controlled crane should

possess the knowledge of all hazards peculiar to radio remote controlled crane operation, ability to judge

distance and moving objects, equipment capacity and radio remote controlled safety rules. Radio remote

controlled cranes should not be operated by any person with insufficient eyesight, hearing, illness, and under

influence of drugs and medications that may cause loss of crane control.

Below are some general operating safety tips that should be strictly followed when operating a radio

remote controlled crane.

1. Prior to crane operation always check the transmitter handset for any damage that might inhibit

proper crane operation.

2. Always check if the red emergency stop button is working properly prior to crane operation.

3. Check the battery status LED on the transmitter for any signs of low battery power.

4. Check the Status LED on the transmitter for any signs of irregularities. Please refer to the

“Transmitter Status Light Indicators & Warnings”on page 24.

5. The crane limit switches should be checked prior to crane operation or at the beginning of each shift.

When checking limit switches the hoist should be centered over an area free of personnel and

equipment.

6. If power to the crane is removed, the operator should turn off the transmitter power immediately

until the power to the crane is restored.

7. If the crane fails to respond properly to operator’s command the operator should stop operation, turn

the transmitter power off, and then report the condition to their supervisor.

8. The transmitter power should be turned off after each use. If the transmitter handset is not in use

always turn the power off and stored it in a safe or designated location. Never leave the transmitter

handset unattended in the working area.

9. Even though Flex system is capable of allowing up to four systems with same channel in use

without interfering with one another, it is always a good practice not to use the same RF channel as

any other Flex systems in use within a distance of 200 feet.

10. Never operate a crane or equipment with two identical channel and ID transmitter handsets at the

same time within the same facility.

3. General System Information

A. TRANSMITTER HANDSET

1. External Illustration

Fig. 01 Fig. 02

1. Emergency Stop Button 8. Push button #12 15. Strap Holder

2. Power Key Switch 9. Push button #1 16. System Information

3. Push button #2 10. Push button #3 17. System Channel

4. Push button #4 11. Push button #5 18. Crane Number

5. Push button #6 12. Push button #7 19. Battery Cover

6. Push button #8 13. Push button #9 20. FCC/CE Information

7. Push button #10 14. Push button #11

2. Internal Illustration

Fig. 03 Fig. 04

1. ArialAntenna 5I-CHIP

2. Transmitting Board 6Function Dip-Switch

3. Status LED Display 7Channel Dip-Switch

4. Function LED Display

B. RECEIVER UNIT

1. External Illustration

Fig. 05

1. ShockAbsorber 6.COM LED Display

2. External Antenna BNC Jack 7.Output Contact Diagram

3. Power LED Display 8.System Information

4. Status LED Display 9.Cable Gland/ Cord Grip

5. SQ LED Display

2. Internal Illustration

Fig. 06

1. AC Line Filter 4.Decoder Board

2. Power Transformer 5.Relay Board

3. Receiving Board

71 42 3 5 6 8

4. Function Settings

A. TRANSMITTER HANDSET

1. System Channel Settings

Fig. 07

Set the transmitter channel simply by adjusting the channel dip-switch located on the backside of the

transmitter encoder board. The system channel table located on page 19 will tell you which dip setting

correspond to which channel. Do make sure that when you change the channel of the transmitter you

must also change the channel of the receiver as well. The channel on both transmitter and receiver must

be identical in order for the system to work.

Example:

Top slot ? “1”

(Fig. 08)Bottom slot ? “0”

The above dip setting would be “100100”, which corresponds to “channel 36”in the system

channels table on page 19.

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

CHANNEL FUNCTION

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

CHANNEL FUNCTION

2. Push Button Functions with LED Display Settings

A. 1-Stage Toggle Switch with LED Display

Below are settings for toggle or latching functions. You can set each and every push button

on the transmitter with toggled(latching) relay contact.The number (1to 4) below the

push button tells you which LED on the transmitter will light up when the push button is

pressed.

Fig. 08

DIP PB1

PB2

PB3 PB4

PB5

PB6 PB7 PB8

PB9

PB10

PB11

PB12

100000001

200000010 34

300000011 234

400000100 1234

500000101 4

600000110 34

700000111 234

800001000 1234

900001001 4

00001010 34

00001011 234

00001100 1234

00001101 4

00001110 34

00001111 234

00010000 1234

1 ?LED #1 will light up when the push button is pressed

2 ?LED #2 will light up when the push button is pressed

3 ?LED #3 will light up when the push button is pressed

4 ?LED #4 will light up when the push button is pressed

Inhaltsverzeichnis

Andere ARC Fernbedienung Handbücher

ARC

ARC ECO Series Bedienungsanleitung

ARC

ARC Flex Series Bedienungsanleitung

ARC

ARC Automate Installationshandbuch

ARC

ARC Flex ECO Series Bedienungsanleitung

ARC

ARC LYCT-505 Bedienungsanleitung

ARC

ARC TMT-918 Bedienungsanleitung

ARC

ARC Flex ECO 4S MRX Bedienungsanleitung

ARC

ARC FLEX 8EX Bedienungsanleitung

ARC

ARC ECO8S/X Bedienungsanleitung

ARC

ARC FLEX 12EX Bedienungsanleitung

ARC

ARC LYCT-820 Bedienungsanleitung

ARC

ARC MEBT-1706 Bedienungsanleitung

ARC

ARC MKFT-1704 Bedienungsanleitung

ARC

ARC MJLT-2005 Bedienungsanleitung

ARC

ARC FLEX EPV Bedienungsanleitung

ARC

ARC Flex 2JX Bedienungsanleitung

ARC

ARC FLEXEPH Bedienungsanleitung

ARC

ARC FLEX ECO 8S Bedienungsanleitung

ARC

ARC FLEX6EX Bedienungsanleitung

ARC

ARC MYCT-1702 Bedienungsanleitung

ARC

ARC PBT-707 Bedienungsanleitung

ARC

ARC AT401 Bedienungsanleitung

ARC

ARC ECO4S/X Bedienungsanleitung

ARC

ARC FLEX4EX Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung