ARGON18 Grey Matter Bedienungsanleitung
VALID FOR MY2022 VERSION 1 / 2022-11-15- ARTWORK 356A
2GRA1 - GREY MATTER 356A: ASSEMBLY GUIDE
Table of contents
1. Tools Needed & Spare Parts Kit 3
2. Troubleshooting / Tips & Specifications 4
3. Frameset Inspection 5
4. Frameset Skus & Descriptions 6-7
5. SeatPost Installation 8
6. SeatPost Min. & Max. Insertion 9
7. Derailleur Hanger Assembly 10
8. 3D Headset Installation 11
10. Brake Routing 12
11. Front Brake Routing 13
12. Mechanical Groupset Routing 14-15
13. eTap Groupset Routing 16
14. Di2 8100-9200 Groupset Routing 17-18
15. Di2 Groupset Routing 19-20
16. Dropper Seatpost Installation 21
17.Bottom Bracket Cable Guide Installation 22
18. Fork Installation 23
19. Bottle Cage Position 24
20. Rear Rack And Fender Installation 25
21. Front Rack And Fender Installation 26 My GREY MATTER
Date of Purchase:
Retailer:
Size:
Serial Number:
To maintain the validity of the warranty,
the bicycle must be fully assembled by
an authorized Argon 18 dealer. High-end
components, particularly carbon parts,
require extra care during assembly.
These components must be installed
using a torque wrench to ensure each bolt
is at the specified torque setting
to prevent damage.
3
1. Tools Needed & spare parts Kit
Hydraulic Hose Cutter Allen Key Set Utility Picks Clean RagFlush Cut Plier
Derailler Hanger
Alignement Gauge
Cables And
Housing Cutter
Thread Locker
Medium Strength
Isopropyl Alcohol Torque Wrench Cassette Lockring Tool
Carbon Paste & Grease
8mm Wrench Bleed Kit Torx Key Set Mineral Oil Headset Press
Rear Derailleur Hanger
100279
Seat Post Clamp
80801
Spare parts Kit
IMPORTANT:
Spare Parts Kit: Essential parts to
always have on hand
IN CASE OF EMERGENCY…THIS MIGHT
SAVE YOUR RIDE!
4GRA1 - GREY MATTER 356A: ASSEMBLY GUIDE
2. Troubleshooting / Tips & Specifications
Brakes
Front brake - 140/160mm disc rotors
Rear brake - 140/160mm disc rotors
Rear mount thickness: 20mm.
Tire Clearance
700c
Maximum clearance: 700x42c. Tires must be no wider than 43mm for both front and
rear wheels. With fenders, tires must be no wider than 38mm.
650b
Maximum clearance: 650bx47. Tires must be no wider than 47mm for both front and
rear wheels. With fenders, tires must be no wider than 42mm.
Seat Post
Ø 27.2mm
Bottom Bracket
BB86 (Press-fit)
Headset
A18 3D IST2
Bottom Bearing: MR127 - 1 1/2”, 36° x 45° Stainless Steel
Top Bearing: MR127 - 1 1/2”, 36° x 45° Stainless Steel
*Some systems may require a 1 1/2”, 45° x 45° top bearing
For more information, please refer to: Argon 18 - Internal routing compatibility
Chainring
The Grey Matter can run a 50-34 chainring maximum. It has been optimized for a
gravel crankset.
A chainring of 48T maximum can be installed in 1x configuration.
Seat Post Collar
Ø 31.8mm
Front Derailleur
The Grey Matter can be used with a 31.8mm clamp front derailleur, or with a front
derailleur clamp band adapter.
Accessories
The Grey Matter is designed to take fenders, a rear rack up to 27kg and front rack up
to 18kg.
5
Before assembling your new Grey Matter, please verify that you have all
the following:
1. Frameset parts checklist (see p.6-7)
2. Inspect the frame for cosmetic defects (scratches, bumps, cracks, paint
defects, etc.)
3. For reference, record serial number on p.2
4. All the necessary bolts (refer to frameset parts, p.6-7)
5. For optimal shifting performance, use a derailleur alignment gauge to make
sure that the derailleur hanger is straight.
3. Frameset Inspection
No. A18 SKU# Funcon Descripon Screw Type Torque Detail Qty
1 81052 Front Thru Axle M12 x 1.5 x 119mm Axle Thru Axle 12 Nm Grease 1
2 81053 Rear Thru Axle M12 x 1.5 x 161mm Axle Thru Axle 12 Nm Grease 1
3 100279* Rear Derailleur Hanger Screw M4 x 14mm Screw Taper Head 2 Nm Locte 1
4 100280* BB Cable Guide Screw M5 x 16mm Screw Flat Head Hand Tighten Locte 1
5 80801* Seatpost Collar Screw M5 x 22mm Screw Socket Head 4 Nm Grease 1
6 81249 Water Bole Screw M5 x 14mm Screw Buon Head 3 Nm Grease 10
7 100283* Cable Cover Screw M4 x 8mm Screw Flat Head Hand Tighten Locte 2
* Included with
Some of the following parts are already assembled on the frame. When
assembling the bike, you will need to adjust these parts according to their
torque specifications and fastener conditions when necessary.
For troubleshooting and FAQ, please visit :
https://www.parktool.com/en-us/blog/repair-help/rear-derailleur-hanger-alignment
Apply carbon paste on the
indicated surfaces.
Apply grease on the
indicated surfaces.
Apply threadlocker on the
indicated surfaces.
4
6Nm
2.5
1Nm
4
5.5Nm
4
7Nm
2
HT
5
12Nm
2
2Nm
3
3Nm
4
3Nm
8
35Nm
2.5
HT
3
HT
40Nm 4Nm
T25
T25
4
3Nm
10
HT
2.5 5
9Nm
2.5
HT-2
32.5
HTHT
3
4Nm
3
2Nm
6
10Nm
2.5
HT
4Nm6Nm
8
Torque Value
Allen key size
IMPORTANT:
Indicates special precautions and
important steps that must be taken to
avoid damage and/or injury.
6GRA1 - GREY MATTER 356A: ASSEMBLY GUIDE
4. Frameset SKUs and Descriptions
*Except for the frame itself, which is not sold separately as a spare part, all parts can be ordered by referring to their respective SKU number.*
80801
81052
81053
100279
100280
80811
80264
100281 100282
100283
81249
100156
100361
FK.GM.XXS-S.356A
FK.GM.M-Xl.356A
Grey Matter Frame
*Not available as a separate SKU
81054
Available Separately
38446 100362
7
4. Frameset SKUs and Descriptions
No. Name A18 SKU# Qty
1 Grey Matter Frame - 1
2Grey Matter Fork 54 mm (XXS-S)
Grey Matter Fork 49 mm (M-XL)
FK.GM.XXS-S.356A
FK.GM.M-XL.356A 1
3 Grey Matter Dropout Assembly 100279 1
4 Grey Matter BB Cable Guide Assembly 100280 1
5 Button Head Cap Screw For Water Bottle 81249 10
6 Grey Matter Cover For Mech 100281 2
7 Grey Matter Cable Cover 100282 2
8 Flat Head Cap Screw M4x8 100283 2
9 GW Front Thru Axle 12mm 81052 1
10 GW Rear Thru Axle 12mm 81053 1
11 Removable Lever For GW Thru Axle 12mm 81054 3
12 Plastic Plug For Water bottle Eyelet 80264 16
13 Foam Liner For Hydraulic Hose 80811 2
14 3D Headset Sleeve IST2 100156 1
15 3D Headset Column 25mm IST2 100361 1
16 Seatpost Collar 80801 1
Optional parts that can be ordered separately
- External Battery SP1 + Holder 38446 1
- 3D Headset Column 15mm IST2 100362 1
8GRA1 - GREY MATTER 356A: ASSEMBLY GUIDE
5SeatPost installation
1. Apply grease on the thread of the M5 x 22mm socket head screw.
2. Assemble the seat post collar (80801) as shown.
3. Adjustthe seatpostatthedesiredheight.Makesuretofollowtheseatpostmin and
max insertion limits. (p. 9)
4. Tighten the M5 x 22mm socket head screw on the seatpost clamp to 4Nm.
IMPORTANT:
Refer to p.9 for seatpost MIN
and MAX insertion limits.
M5 x 22mm
4
4Nm
4
3Nm
3Nm
2
2Nm
3
3Nm
5
9.5Nm
4
5Nm
2
HT
8
12Nm
8
35Nm
2.5
2Nm
2
0.5-1Nm
40Nm
4Nm
T25
T25
2.5
HT
80801
M5 x 22mm
4
4Nm
4
3Nm
3Nm
2
2Nm
3
3Nm
5
9.5Nm
4
5Nm
2
HT
8
12Nm
8
35Nm
2.5
2Nm
2
0.5-1Nm
40Nm
4Nm
T25
T25 2.5
HT
9
6. SeatPost MIN. & MAX. insertion
Depending on the size of the frame, the desired height and
the chosen seatpost, the seatpost might need to be cut.
Seatpost insertion Limits (mm)
SIZE Max. Insertion Min. Insertion
A B
XX-SMALL 180 80
X-SMALL 210 80
SMALL 245 80
MEDIUM 215 80
LARGE 250 80
X-LARGE 285 80
B
A
10 GRA1 - GREY MATTER 356A: ASSEMBLY GUIDE
For assistance, visit Park Tool’s website at:
https://www.parktool.com/blog/repair-help/rear-derailleur-hanger-alignment
7. Derailleur Hanger Assembly
Assembling the rear derailleur hanger:
1. Assemble the rearderailleur hanger (100279) on the frame.
2. Apply a drop of blue Threadlocker (n. 242) on the
M4x14mm screw threads and tighten to 2Nm.
3. Use a rear derailleur hanger alignment gauge to align the
rear derailleur hanger. (If necessary)
100279
Using a front derailleur :
1. The Grey Matter seattube is 31.8mm in diameter. A front
derailleur can be used with a band clamp adapter, or a
clamp band front derailleur.
Seattube OD : 31.8mm
4
6Nm
2.5
1Nm
4
5.5Nm
4
7Nm
2
HT
5
12Nm
2
2Nm
3
3Nm
4
3Nm
8
35Nm
2.5
HT
3
HT
40Nm 4Nm
T25
T25
4
3Nm
10
HT
2.5 5
9Nm
2.5
HT-2
32.5
HTHT
3
4Nm
3
2Nm
6
10Nm
2.5
HT
4Nm6Nm
8
M4 x 14mm
Inhaltsverzeichnis
Andere ARGON18 Fahrrad Handbücher
ARGON18
ARGON18 KRYPTON Bedienungsanleitung
ARGON18
ARGON18 GALLIUM CS DISC 322A Bedienungsanleitung
ARGON18
ARGON18 E-119 TRI Bedienungsanleitung
ARGON18
ARGON18 E-119 TRI Bedienungsanleitung
ARGON18
ARGON18 GALLIUM 260A Bedienungsanleitung
ARGON18
ARGON18 E-119 TRI+ Bedienungsanleitung
ARGON18
ARGON18 NITROGEN DISC 286A Bedienungsanleitung
ARGON18
ARGON18 NITROGEN 231A Bedienungsanleitung
ARGON18
ARGON18 GALLIUM DISC 339A Bedienungsanleitung
ARGON18
ARGON18 GALLIUM PRO 347A Bedienungsanleitung
ARGON18
ARGON18 E-119 TRI+ Bedienungsanleitung
ARGON18
ARGON18 E-118 NEXT Bedienungsanleitung
ARGON18
ARGON18 NITROGEN PRO 230A Bedienungsanleitung
ARGON18
ARGON18 E-118 NEXT Bedienungsanleitung
ARGON18
ARGON18 E-119 TRI+ Bedienungsanleitung
ARGON18
ARGON18 E-112 Bedienungsanleitung
ARGON18
ARGON18 E-119 TRI+ Bedienungsanleitung
ARGON18
ARGON18 GALLIUM DISC 280A Bedienungsanleitung
ARGON18
ARGON18 MY2016 Nitrogen Pro Bedienungsanleitung
ARGON18
ARGON18 GALLIUM PRO Bedienungsanleitung
