Argos 184/9198 Bedienungsanleitung

Assembly Instructions - Please keep for future reference

Issue 2 - 21/01/15

MADE IN

BRITAIN

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928

or email: [email protected] (quoting your original order number)

Important - Please read these instructions fully before starting assembly

Dimensions

Seville - 5 Drawer Chest

184/9198

145/0862

184/8319

189/6385

ALR2910

Width - 66cm

Depth - 33cm

Height - 91cm

Issue 2 -21/01/15 - Overbalance Bracket replaced with Strap.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 21kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

overbalance protector kit

supplied or, an alternative fixing

method of your choice.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

80%

Top (D2488A)

(627 x 327mm)

Plinth (D2491A)

(627 x 80mm)

Drawer Front (D2492A)

(623 x 157mm) x 5

Back (X653-648)

(653 x 648mm)

Left Side (D2503A)

(896 x 328mm)

Right Side (D2504A)

(896 x 328mm)

Drawer Base (TSAV)

(299 x 608mm) x 5

6Drawer Wrap (WSAV)

(1221 x 95mm) x 5

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Tools required

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Ruler - Use this ruler to help correctly identify the screws

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

Wooden dowel (F22) x 4

Metal dowel (F901) x 10

D E F

Small locking

nut (F3) x 10

40mm Screw (F910) x 6

Handle (F300) x 10

Nail (F51) x 15

IR (F601)

L (F600)

F599

Drawer stops (F599) x 10

Runners (F600) x 5 and (F601) x 5

25mm Screw (F95) x 10

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(do not use for

fitting screws)

Strap Screw Washer x 2

Overbalance protector kit (F269) x 1

Step 1

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

x 5

Prepare the drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panel.

x 5

Fit the drawer base

Place the drawer base

into the narrow slot on

the drawer wrap .

Fold the wrap around the

drawer base.

Step 3

Prepare the drawer

wraps

Insert 2 small locking

nuts into each of the

drawer wraps .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 2

Note: Due to the manufacturing

process, the holes for the

locking nut can be on either

surface of the drawer wrap.

Note: The locking nuts can be on

either surface of the drawer sides.

Make sure that the small groove

is on the inside, as shown.

Plain chipboard

surface

Assembly Instructions

Step 4

Attach the handles

Attach 2 handles to

each of the 5 drawer

fronts using 2

screws .

Note: Do not

overtighten the screws.

Step 6

Step 5

x 5

Attach the drawer

stops

Carefully break off 2

drawer stops (F599) from

a set of drawer runners

. .

Push the drawer stops

fully through the drawer

wrap from the inside.

F599

x 5

SNAP!

F599

x 5

Fit the drawer front

Turn drawer wrap

assembly over and push

it onto the back of the

drawer front .

Note: Turn the locking

nuts clockwise to

secure the panels - more

than 1/2 a turn.

Assembly Instructions

Step 7

Prepare the right side

Push fit 5 right runners

marked ‘R’ into the right

side .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

Step 8

Step 9

Finished

front edge

F601

Finished

front edge

Prepare the left side

Separate the runners .

Push fit 5 left runners

marked ‘L’ into the left

side .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

LF600

Finished

front edge

Prepare the top

Tap 2 wooden dowels

into the top .

plain chipboard surface

Assembly Instructions

Finished

front edge

Step 10

Join the top to the

right side

Push the top onto

the right side and

secure with 2 screws .

Step 11

Prepare the plinth

Tap 2 wooden dowels

into the plinth .

plain chipboard surface

Finished

front edge

Assembly Instructions

Step 12

Join the plinth to the

right side

Push the plinth onto

the right side and

secure with screw .

Fit the left side

Push the left side

onto the assembly and

secure with 3 screws .

Step 13

Support the plinth

until the left side

has been fitted in

the next step.

Assembly Instructions

Step 14

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the 3

edges of the back ,

as shown.

Note: Nails should

be spaced about 150mm

apart.

Stand the unit up for

the next step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Warning: The

unit is heavy.

Lift with care.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 906/4638 Bedienungsanleitung

Argos

Argos 346/4423 Bedienungsanleitung

Argos

Argos High Back Sofa Set 743/7377 Bedienungsanleitung

Argos

Argos 309/1951 Bedienungsanleitung

Argos

Argos White Tidy Cupboard 830/1732 Bedienungsanleitung

Argos

Argos Stakka 632/0973 Bedienungsanleitung

Argos

Argos Capella Bedienungsanleitung

Argos

Argos 617/2516 Bedienungsanleitung

Argos

Argos 875/5429 Bedienungsanleitung

Argos

Argos 600/6479 Bedienungsanleitung

Argos

Argos 389/6400 Bedienungsanleitung

Argos

Argos 343/3980 Bedienungsanleitung

Argos

Argos Vancouver II 643/8133 Bedienungsanleitung

Argos

Argos Chrome Tidy Rail 875/8457 Bedienungsanleitung

Argos

Argos 832/7149 D Bedienungsanleitung

Argos

Argos Austen 804/3416 Bedienungsanleitung

Argos

Argos Romana 305/1850 Bedienungsanleitung

Argos

Argos Solid Wood Linen Bin 8318471 Bedienungsanleitung

Argos

Argos 709/2626 Bedienungsanleitung

Argos

Argos Chequer Corner 609/2452 Bedienungsanleitung

Argos

Argos Ottawa 194803 Bedienungsanleitung

Argos

Argos Fabric Ottoman With 2 Small Stools 755/2238 Bedienungsanleitung

Argos

Argos Wooden Filer Bedienungsanleitung

Argos

Argos 719/3594 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung