Argos 266/0709 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 152cm

Depth - 49cm

Height - 181cm

Capella - 2 Drawer 4 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 6 - 23/04/14

Important - Please read these instructions fully before starting assembly

266/0709

266/9683

241/5844

248/4112

ALR3000

04/08/11 - Drawer Front size amended to 743 x 157mm.

Drawer assembly changed to Knock-in Pegs.

Drawer Sides and Drawer Back changed to take Knock-in Pegs.

24/02/12 - Drawer Support added and drillings have been updated for the Base and Fixed Shelf.

Base and Fixed Shelf have both gone up to issue B.

Issue 4 - 16/05/12 - New Argos code added

Issue 5 - 01/04/2014 - Drawer box size increased.

Add 8 Drawer wedges.

Add 5 plastinails.

Remove old cat codes and add new ones.

Issue 6 - 23/04/14 - The flange head screws for the backs have been replaced with 6 Nail Screws and Back Holders.

The Base and Fixed Shelf are now issue C because the Drawer Support has been moved back because of the deeper drawers.

Amended the drawer assembly drawings to represent the new drawer wrap changes.

The step for adding the plastinails is now a separate step.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 96kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Tools required

Rule

Scissors

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Step

ladder

Electric drill

(only use

when drilling

into walls)

Square

mm 10 20 30 40 50 60 70 80 90 100

Components - Panels

Please check you have all the panels listed below

80% x 3

90% x 1

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Left Side (D1013A)

(1808 x 490mm)

2 3

Right Side (D1014A)

(1808 x 490mm)

Large Door (D1017A)

(1701 x 369mm) x 2

13 14

17 Large Back (X830A)

(1711 x 753mm) x 2

Hanging Rail (FHR728)

(728mm long) x 2

Mirror Door (D1030A)

(1381 x 369mm) x 2

(Mirror - SG14

1376 x 311mm

4mm Safety Back SAR)

Short Divider

(D1027A)

(323 x 470mm) x 2

Centre Divider (D1028A)

(1369 x 470mm)

Plinth (D1032A)

(1491 x 85mm)

Top (D1026A)

(1491 x 471mm)

Drawer Front (D1031A)

(743 x 157mm) x 2

Drawer Back

(W688-124BK)

(688 x 124mm) x 2

Drawer Base (T699-367)

(699 x 367mm) x 2

Fixed Shelf (D1029C)

(720 x 470mm)

Drawer Support

(D1397A)

(302 x 302mm)

Left Drawer Side

(W370-124LH)

(370 x 124mm) x 2

Right Drawer Side

(W370-124RH)

(370 x 124mm) x 2

Base (D1111C)

(1491 x 471mm)

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 10

Metal dowel (F901) x 16

D E

Large locking

nut (F900) x 12

G H I

Nail (F51) x 48

see malibu fitment mk2 for large number of panels and fittings

Rail holder

(F1014) x 4

25mm Screw (F50) x 12 13mm Screw (F79) x 1

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Ruler - Use this ruler to help correctly identify the screws

13mm Screw (F63) x 24

Drawer runner (F1004) x 4

9mm Screw (F74) x 4

Handle (F930) x 6

Small locking

nut (F3) x 4

Bracket (F327) x 1

Hinge (F522) x 6

Hinge plate

(F523) x 6

40mm Screw (F910) x 14

Hinge Plate

(F521) x 6 Hinge (F520) x 6

9mm Screw (F73) x 8

AHP1546

AHP0826

Knock-in Peg (F171GY) x 8

Plastic Nail

(F91) x 5

Wedgefix

(F639) x 8

UWX

Nail screw

(F277) x 6

Back holder (F276) x 6

*These can also be round

Assembly Instructions If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

x 2

Prepare the drawer

fronts

Screw 2 metal dowels

into the holes shown on

the back of each drawer

front .

Note: Tighten the metal

dowels up fully against

the panels.

Step 3

80%

x 2

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 2Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

x 2

12 13

x 2

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

Assembly Instructions

80%

x 2

Attach the handle

Attach a handle to

each drawer front

using 2 screws .

Step 6

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front . .

Step 5

Fit the drawer back

Fit the drawer back .

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

12 13

x 2

12 13

Fit the wedgefixes

Turn the 2 drawer

assemblies over and

slide 4 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

Step 7

Step 4

x 2

Finished

top edge

Finished

top edge

Finished

top edge

Finished

front edge

Finished

top edge

Assembly Instructions

Step 8

80%

x 3

Finished

front edge

Finished

front edge

Prepare a short

divider

a: Place 2 runners on

a short divider . Slide

back top of runner and

use 1st hole from the

front to fit 1st screw .

b: Slide runner back the

other way and use 3rd

hole from the back to fit

2nd screw .

Prepare the other

short divider

a: Place 2 runners on

a short divider . Slide

back top of runner and

use 1st hole from the

front to fit 1st screw .

b: Slide runner back the

other way and use 3rd

hole from the back to fit

2nd screw .

a: L

Back edge

Finished

front edge

Finished

front edge

Back edge

Finished

front edge

Step 9

Assembly Instructions

Step 10

Step 11

80%

x 3

Prepare the fixed

shelf

Screw 2 metal dowels

into the fixed shelf .

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Join the short dividers

to the fixed shelf

Attach the 2 short

dividers to the fixed

shelf using 4 screws

. .

Assembly Instructions

Step 12

Step 13

Finished

front edge

Prepare the centre

divider

Important: The hinge

plates used in this

step are in the bag

marked as AHP0826.

Fit 3 hinge plates to

the centre divider as

shown, making sure that

the slot is facing towards

the finished front edge.

Push a rail holder into

the centre divider .

Make sure that it is fitted

straight, in line with the

panel edges.

Turn the centre divider

over

Fit 3 hinge plates to

the other surface of the

centre divider as

shown, making sure that

the slot is facing towards

the finished front edge.

Push another rail holder

. into the centre divider

. .

QFinished

front edge

Turn the centre

divider over

AHP1546

AHP0826

Finished

front edge

Fit the centre divider

Attach the centre divider

. to the fixed shelf

using 2 screws . G

3 8

Assembly Instructions

Step 14

Step 12

Step 15

Prepare the drawer

support

Insert 2 large locking

nuts into the

drawer support .

Note: Due to the manufacturing process,

the drawer support may either have 1 or

2 plain chipboard surfaces.

Finished

front edge

Prepare the top and

base

a: Tap 4 wooden dowels

. into the top .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 4 large locking

nuts into the top .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

b: Tap 4 wooden

dowels into the base

. .

Insert 4 large locking

nuts into the base

Finished

front edge

plain chipboard surface

Plain

chipboard

surface

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 411/3883 Bedienungsanleitung

Argos

Argos New Sywell 355/9510 Bedienungsanleitung

Argos

Argos Ontario 149118 Bedienungsanleitung

Argos

Argos 603/4135 Bedienungsanleitung

Argos

Argos Shelby 322/0296 Bedienungsanleitung

Argos

Argos Home 615/1795 Bedienungsanleitung

Argos

Argos Arvika 357/6823 Bedienungsanleitung

Argos

Argos Heathdon Habitat Lavendon 953/0083 Bedienungsanleitung

Argos

Argos HOME Bedienungsanleitung

Argos

Argos 875/4860 Bedienungsanleitung

Argos

Argos SKYE WOOD 476/7538 Bedienungsanleitung

Argos

Argos Haversham Bedienungsanleitung

Argos

Argos 869/6571 Bedienungsanleitung

Argos

Argos Mia 2627436 Bedienungsanleitung

Argos

Argos Solid Wood Linen Bin 8318471 Bedienungsanleitung

Argos

Argos ASHWELL 806/3922 Bedienungsanleitung

Argos

Argos Aspley 498/9622 Bedienungsanleitung

Argos

Argos Matrix Glass Nest Table Bedienungsanleitung

Argos

Argos 435/6152 Bedienungsanleitung

Argos

Argos Marcell 4ft6 Frame Bedienungsanleitung

Argos

Argos 346/0348 Bedienungsanleitung

Argos

Argos Silbury 4146922 Bedienungsanleitung

Argos

Argos Alex Headboard 634/1880 Bedienungsanleitung

Argos

Argos 875/5106 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung