Argos 906/5716 Bedienungsanleitung

Dimensions

Width - 80cm

Depth - 33cm

Height - 86cm

Venetia - Shoe Storage

Assembly Instructions - Please keep for future reference

Issue 8 - 06/10/14

ALR2595

Issue 2 - 02/06/11 - Tools and Rule added to fittings page.

906/5716

Issue 3 - 17/05/12 - Argos code added.

Issue 4 - 20/12/12 - Title changed to Venetia.

Rebates taken off of the Left Side, Right Side, Top and Base - all gone up to issue B.

Shelves increased in size to 760 x 312mm - gone up to issue B.

MADE IN

BRITAIN

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928

or email: [email protected] (quoting your original order number)

Important - Please read these instructions fully before starting assembly

Issue 5 - 29/07/13 - Click have agreed with Argos to put their help line number on the Venetia range as a trial.

Issue 6 - 06/02/14 - Replaced the F284 screw (6x5/8 flange head) with a F79 screw (6x1/2 flange head).

Issue 7 - 25/07/14 - Deleted the blow up diagram at steps 4b and 5b and updated the text to current.

Issue 8 - 06/10/14 - The unit is now available in Oak or White with a different handle on each.

The handle screw has been changed to a Flange Blunt End.

Oak

White

323/9603

White

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 28kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Tools required

Rule

Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(only use when drilling

walls and doors)

Square

mm 10 20 30 40 50 60 70 80 90 100

80%

x 2

7 8

Back (X803)

(848 x 780mm)

Drawer Wrap (W429)

(1393 x 95mm)

Drawer Base (T429)

(319 x 740mm) 11

Left Side (D0844B)

(830 x 312mm)

Right Side (D0845B)

(830 x 312mm) Base (D0847B)

(797 x 329mm)

Top (D0846B)

(797 x 329mm)

Loose Shelf (D0850B)

(760 x 312mm) x 3

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

Oak Drawer Front (D0848A)

(786 x 138mm)

White Drawer Front (D3060A)

(786 x 138mm)

Oak Left Door (D3058A)

(683 x 392mm)

Oak Right Door (D3059A)

(683 x 392mm)

White Left Door (D3061A)

(683 x 392mm)

White Right Door (D3062A)

(683 x 392mm)

A B

Large locking

nut (F900) x 4

G H

Small locking

nut (F3) x 2

9mm Screw (F74) x 2

9mm Screw (F73) x 4

Drawer runner (F1004) x 2

Metal dowel (F901) x 6

Nail (F51) x 22

40mm Screw (F910) x 4 25mm Screw (F95) x 6

13mm Screw (F63) x 8

Plastic Nail (F91) x 4 Shelf support (F121) x 12

M ON

Bracket (F327) x 1

Handle (F236) x 3

Hinge plate (F523) x 4 Hinge (F518) x 4

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

13mm Screw (F79) x 1

Handle (F315) x 3

OAK UNIT WHITE UNIT

Step 1

Prepare the drawer

front and wrap

a: Screw 2 metal dowels

. into the holes shown

on the back of the

drawer front .

Note: Tighten the metal

dowels up fully against

the panel.

b: Insert 2 small locking

nuts into the holes

shown on the drawer

wrap .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Assemble the drawer

a: Place the drawer

base into the narrow

slot on the drawer wrap

. . Fold the wrap

around the base.

b: Turn the drawer wrap

assembly over and push

it onto the back of the

drawer front .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Step 2

plain surface

Note: Due to the manufacturing

process, the holes for the

locking nut can be on either

surface of the drawer wrap.

Note: The locking nuts can be on

either surface of the drawer sides.

Make sure that the small groove

is on the inside, as shown.

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 3

Step 4

Attach the handle

Attach a handle to the

drawer front using 2

screws .

Fit runners to left side

a: Place a runner on

the left side . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

c: Insert 2 large locking

nuts into the left side

. .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Fit 2 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

Finished

front edge

This shows the handle

for the Oak unit.

You may have the

White unit.

Assembly Instructions

Step 5

Finished

front edge

Finished

front edge

Fit runners to right

side

a: Place a runner on

the right side . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

c: Insert 2 large locking

nuts into the right

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Fit 2 hinge plates onto

the right side , making

sure that the slot is

facing towards the

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 6

Prepare the top

Note: The top and base

panels are very similar but,

the holes in the top panel

are not drilled all the way

through.

Fix a bracket to the

middle of the top ,

flush to the back edge,

using screw .

Screw 4 metal dowels

into the holes shown on

the top .

Finished

front edge

Join the top and right

side

Push the top onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the right side .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Step 7

Finished

front edge

Finished

front edge

Assembly Instructions

Step 8

Fit the left side

Push the left side

onto the top .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the left side .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Fit the base

Attach the base to

the left side and right

side using 4 screws

. .

Step 9

Assembly Instructions

Step 10

Fit the plastic nails

Tap the plastic nails

into the base as

shown.

The plastic nails

must go up into

the bottom

edge of the left

side and

right side .

Step 11

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around the

outside edges of the

back .

Note: Nails should

be spaced about

150mm apart.

Stand the unit up

for the next step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Charlie 332/7553 Bedienungsanleitung

Argos

Argos Shelby 322/0296 Bedienungsanleitung

Argos

Argos Rattan 3566651 Bedienungsanleitung

Argos

Argos Ohio Ottoman 143/6563 Bedienungsanleitung

Argos

Argos 609/7024 Bedienungsanleitung

Argos

Argos ORLEANS Bedienungsanleitung

Argos

Argos Nordic 3 Drawer Chest Bedienungsanleitung

Argos

Argos 600/3575 Bedienungsanleitung

Argos

Argos Malibu 621/3310 Bedienungsanleitung

Argos

Argos Hygena Bedienungsanleitung

Argos

Argos 244/9315 Bedienungsanleitung

Argos

Argos Baltimore 603/0115 Bedienungsanleitung

Argos

Argos Foley 333/7976 Datenblatt

Argos

Argos Costello 0504/8036 Bedienungsanleitung

Argos

Argos Seville 147/4556 Bedienungsanleitung

Argos

Argos Malibu Series Bedienungsanleitung

Argos

Argos 719/1792 Bedienungsanleitung

Argos

Argos New Hallingford Bedienungsanleitung

Argos

Argos BRADLEY 2581747 Bedienungsanleitung

Argos

Argos Anderson 2 Door Tall Robe 274/3750 Bedienungsanleitung

Argos

Argos Jonas 889 / 4184 Bedienungsanleitung

Argos

Argos 408/5935 Bedienungsanleitung

Argos

Argos Jenson Bedienungsanleitung

Argos

Argos Phoenix 2 Door Storage Cubes Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung