Argos Malibu Series Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 38cm

Depth - 40cm

Height - 61cm

Malibu - 3 Drawer Bedside Chest

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 7 - 24/06/14

Important - Please read these instructions fully before starting assembly

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

267/7905

262/9049

257/8633

262/1449

268/4943

ALR3028

29/03/11 - Added Argos Codes 719/1709 and 719/1699

Issue 3 - 17/09/12 - Added notes to drawer wrap preparation stages telling customer the cams can be either surface of the wrap

Issue 4 - 10/10/13 - Title changed from ‘Malibu 3 Drawer Bedside’ (ZMB3D2) to ‘Malibu 3 Drawer Chest’ (ZMBK3D2).

6 new codes added to front page.

Issue 5 - 18/02/14 - 5 new HD codes added to front page.

Issue 6 - 23/03/14 - New version with metal runners, 3 piece drawer wraps etc...

Issue 7 - 24/06/14 - Removed cat codes 258/2801, 278/9783, 262/1236, 258/8207, 242/8941 and added cat code 275/5549.

266/8275

274/8762

249/7264

278/4056

267/8076

275/5549

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 14kgs. Please lift

with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Drawer Divider - D0034A

145 x 249mm

waterfall

1 2

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Drawer Back (W317-124)

(317 x 124mm) x 3

Drawer Front (D2824A)

(345 x 156mm) x 3

Drawer Base (T328-367)

(328 x 367mm) x 3

Left Side (D2821A)

(591 x 394mm)

Plinth (D2825A)

(349 x 92mm)

Rail (D2826A)

(349 x 72mm)

Back Rail (D2836A)

(349 x 60mm)

Back (X511-373)

(511 x 373mm)

Left Drawer Side (W370-124LH)

(370 x 124mm) x 3

Right Drawer Side (W370-124RH)

(370 x 124mm) x 3

Right Side (D2822A)

(591 x 394mm)

Top (D2823A)

(388 x 396mm)

8 9

11 12

Please check you have all the fittings listed below

Tools required

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 10

Metal dowel (F901) x 8

Nail holder (F149) x 1

Large locking

nut (F900) x 2

Small locking

nut (F3) x 6

40mm Screw (F910) x 4

25mm Screw (F50) x 3 Handle (F631) x 3

Rule Scissors Hammer Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Nail (F51) x 12

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Drawer runner (F1004) x 6

Plastic Nail (F91) x 4

Wedgefix (F639) x 6

9mm Screw (F74) x 6

Knock-in Peg (F171GY) x 12

9mm Screw (F73) x 12

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

x 3

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

8 9

Attach the handles

Attach a handle to

each of the drawer fronts

. using screw .

Note: Do not

overtighten the screw.

8 9

Step 7

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 2 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

x 3

Finished

front edge

Finished

front edge

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 8

Finished

front edge

Prepare the left side

a: Place 3 runners on

the left side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

Insert a large locking

nut into the left side

. .

Note: The arrow on the

locking nuts must point

towards the hole in the

edge of the panel.

Tap a wooden dowel

into the left side .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

10mm

Assembly Instructions

Step 9

Prepare the right side

a: Place 3 runners on

the right side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

Insert a large locking

nut into the right side

. .

Note: The arrow on the

locking nuts must point

towards the hole in the

edge of the panel.

Tap a wooden dowel

into the right side .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Finished

front edge

Finished

front edge

Finished

front edge

Step 10

Prepare the plinth, rail

and back rail

a: Tap 2 wooden

dowels into the plinth

. .

b: Tap 4 wooden

dowels into the rail .

a: Tap 2 wooden

dowels into the back

rail .

Finished

front edge

plain chipboard surface

Finished

front edge

Assembly Instructions

Step 11

Step 12

Fit the rail to the right

side

Push the rail onto the

right side .

plain chipboard surface

Finished

front edge

plain chipboard surface

Fit the plinth and back

rail to the right side

Push the plinth onto

the right side and

secure it with screw .

Push the back rail

onto the right side

and secure it with screw

. .

plain chipboard surface

Note: Support the back

rail until the left side has

been fitted in the next step.

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 13

Fit the left side

Push the left side

onto the unit and secure

it with 2 screws .

Prepare the top

Screw 2 metal dowels

into holes shown on the

underside of the top .

Step 14

plain chipboard surface

Finished

front edge

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Solid Wood Linen Bin 8318471 Bedienungsanleitung

Argos

Argos New Sywell 259/1892 Bedienungsanleitung

Argos

Argos Modular Bedienungsanleitung

Argos

Argos Stirling 345/8312 Bedienungsanleitung

Argos

Argos Stakka 475/9955 Bedienungsanleitung

Argos

Argos 355/3932 D Bedienungsanleitung

Argos

Argos CANVAS 214/6601 Bedienungsanleitung

Argos

Argos Seville 147/4556 Bedienungsanleitung

Argos

Argos Florenza 162/2377 Bedienungsanleitung

Argos

Argos New Sywell 355/9510 Bedienungsanleitung

Argos

Argos Stirling 343/9049 Bedienungsanleitung

Argos

Argos WOW BUTTERFLY 6006558 Bedienungsanleitung

Argos

Argos Abigail 3 Bedienungsanleitung

Argos

Argos 656/0159 Bedienungsanleitung

Argos

Argos Habitat DUO CLIC CLAC 3553657 Bedienungsanleitung

Argos

Argos Le Marais 393/0782 Bedienungsanleitung

Argos

Argos Porto 650/3037 Bedienungsanleitung

Argos

Argos HOME Apartment Tall Boy Bedienungsanleitung

Argos

Argos Evelyn 340/3790 Bedienungsanleitung

Argos

Argos Betsy 404/4842 Bedienungsanleitung

Argos

Argos Jarvia 143/6202 Bedienungsanleitung

Argos

Argos 501-3298 Bedienungsanleitung

Argos

Argos Vancouver II 643/8157 Bedienungsanleitung

Argos

Argos White Tidy Cupboard 830/1732 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung