Argos Canterbury 2 DR 2 DRW ROBE Bedienungsanleitung

Canterbury 2 DR 2 DRW ROBE

Assembly Instructions - Please save for future reference

803/5754

803/9664

797/9055

Dimensions

Width - 104.3cm

Depth - 62.7cm

Height - 202.1cm

Important – Please read these instructions carefully before starting the assembly

If you need help or have damaged or missing parts, call the Customer Helpline:

Argos = 0345 6400800

71938 Version F Date 22/02/2018

max.

lbs

Rev B 19-01-2016 ahs: 4 stk. grebsskruer skiftet fra 26228 til 26232.

Nb: ingen syl på argos vejledninger

Rev C 14-11-2017 kol: Skuffedele udskiftet, Trimann logo tilføjet.

71938

-50

71938

www.tvilum.com

max.

lbs

Rev B 19-01-2016 ahs: 4 stk. grebsskruer skiftet fra 26228 til 26232.

Nb: ingen syl på argos vejledninger

Rev C 14-11-2017 kol: Skuffedele udskiftet, Trimann logo tilføjet.

71938

-50

71938

www.tvilum.com

Safety and Care Advice

Important – Please read these instructions carefully before starting the assembly

Note: If required, the next

page can be cut out and used

as reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• Check that you have all the

components and tools as listed

on the following pages.

• Remove all ttings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area - small

parts can choke if swallowed.

• Make sure that you have

enough space to lay out the

parts before starting.

• During assembly, do not stand

or put weight on the product, as

this may cause damage.

• Assemble the item as close

to its nal position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your oor.

• Parts of the assembly will

be easier with 2 people to

complete.

• We do not

recommend the use

of power drivers for

inserting screws, as

this could damage

the unit. Please only use hand

screw drivers.

• Only clean the unit using a

damp cloth and mild detergent.

Do no use bleach or abrasive

cleaners.

• From time to time, check to

see if screws have become

loose. If so, please tighten them

again.

• This product should not be

discarded with household waste.

Take it to your local authority

waste disposal centre.

Care and maintenance

• The provided tip-over restraint

must be installed in order to

optimize user safety.

Safety

Components - Panels

Please check that you have all the panels as listed below (1/2)

If you have damaged or missing components, call the

Customer Helpline: Argos = 0345 6400800

00734

Left drawer side

(45.0 x 14 cm) x 2

00733

Right drawer side

(45.0 x 14 cm) x 2

03328

Drawer back

( 43.7 x 14 cm) x 2

06383

Drawer bottom

(44.8 x 44.7 cm) x 2

09788

Back Panel (201.5 x 97.9 cm)

18731

Frame door

(169.3 x 48.2 cm) x 2

76427

Side Profile

(62 x 2.5 cm) x 2

76428

Side Profile

(62 x 2.5 cm) x 2

76430

Front Profile (103.5 x 4 cm) x 2

Components - Panels

Please check that you have all the panels as listed below (2/2)

If you have damaged or missing components, call the

Customer Helpline: Argos = 0345 6400800

Drawer front

(48.2 x 22.1 cm) x 2

Side panel L / R

(198.8 x 58 cm) x 2

Divider Panel (25 x 57.8 cm)

Bottom / Top panel (104.3 x 62.4 cm) x 2

Fixed shelf (95.5 x 57.9 cm) x 2

Drawer runner x4

41421

Hanger x1

72509

Please check that you have all the ttings as listed below

Note: The quantities below are the correct amounts to complete the assembly.

In some cases, more ttings may be supplied than required.

Components - Fittings

Ruler - Use this ruler to help correctly identify the screws

Tools required

Allen key x1

97642

Dowel (ø5 x 30mm) x20

20203

Hinge x8

52291

Floor glider x6

63008

Handle x4

81040

Stop x4

96203

Strap x2

94009

Cross head screwdriver

(medium & large)

Wooden block

Books x6

Tape measure

Flathead screwdriver

(medium)

Ruler

01 02 03 04 05 06 07 08 09 0 100 110 120 130 140 150

01 23 45 6

Eye protection

(when using a

hammer or glue)

Hammer

Holder x2

10601

Bracket x8

11229

Screw (ø5 x 7.5mm) x8

11230

Drawer fastener x8

20228

25 pcs

Nails x3

23006

Flat head screw

(ø3 x 15mm) x8

25233

Screw (ø7 x 8mm) x16

26071

Machine screw

(M4 x 23mm) x4

26232

Flat head screw

(ø3 x 12mm) x2

25215

Connector bolt

(ø7 x 50mm) x15

25610

Flat head screw

(ø6.3 x 27mm) x18

26033

Flat head screw

(ø5.8 x 9mm) x8

26020

Cam bolt x6

31513

Cam x6

31687

Wedges x4

33204

Hinge plate x8

50491

Machine screw

(M4 x 9mm) x4

26214

Machine screw

(M4 x 7mm) x8

26211

Awl

Assembly Instructions

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

Step 2

Attach hanger holder

Attach holder 10601

with at head screw

25215 on side panel

FA .

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

Dowel

#20203 x12

Cam

#31687 x2

Fittings you will need for this step:

Holder

#10601 x2

Flat head screw

#25215 x2

Step 1

Insert dowels

Insert dowels 20203

into outer holes on the

ends of side panel FA +

divider panel GA

Place cam 31687 into

the holes on divider pan-

el GA with the arrows

facing the edges of the

panels.

Step 3

Assembly Instructions

Step 4

# $PRPVIEW:{Pos_Beslag}

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

Fittings you will need for this step:

Screw

#26071 x16

Machine screw

#26211 x8

Hinge Plate

#50491 x8

Fittings you will need for this step:

# $PRPVIEW:{Pos_Beslag}

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

Screw

#11230 x8

Attach hinge plates

Fix each hingplate

50491 with two screw

26071 .

Insert machine screw

26211 in the center of

each hinge plate as illus-

trated.

Attach screws

Attach screw 11230 in

the holes of the top and

bottom hole rows as

illustrated.

Assembly Instructions

# $PRPVIEW:{Pos_Beslag}

241

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

Front

Fittings you will need for this step:

# $PRPVIEW:{Pos_Beslag}

241

FA FA

Beslag sættes ind i scala 1:2 som udgangspunkt

Flat head screw

#26020 x4

Flat head screw

#25233 x4

Drawer runner

#41421 x2

Step 5

Mount drawer runners

1. Note the holes when

extending drawer runner

41421 . The arrow at

the end of the drawer

runners must face

towards the front edges

as illustrated.

2. Extend the drawer

runner 41421 , and

attach one at head

screw 26020 in hole

nr. 1 on panel FA , as

illustrated.

3. Pull drawer runner

41421 backwards, and

attach the next at head

screw 26020 in hole

nr. 22, through the hole

in the drawer runner

41421 .

4. Extend drawer runner

41421 a bit forward, and

use an awl to pre-drill

a hole in hole nr. 24 of

drawer runner 41421 .

Then, insert at head

screw 25233 in that

hole.

5. Like step 4, use an awl

in hole nr. 12, and then

insert at head screw

25233 .

Repeat these 5 steps

for the remaining drawer

runner 41421 .

Assembly Instructions

Step 6

# $PRPVIEW:{Pos_Beslag}

241

Beslag sættes ind i scala 1:2 som udgangspunkt

71938

-50

# $PRPVIEW:{Pos_Beslag}

241

Beslag sættes ind i scala 1:2 som udgangspunkt

71938

-50

# $PRPVIEW:{Pos_Beslag}

241

Beslag sættes ind i scala 1:2 som udgangspunkt

71938

-50

# $PRPVIEW:{Pos_Beslag}

241

Beslag sættes ind i scala 1:2 som udgangspunkt

71938

-50

# $PRPVIEW:{Pos_Beslag}

241

Beslag sættes ind i scala 1:2 som udgangspunkt

71938

-50

Front

Fittings you will need for this step:

Flat head screw

#26020 x4

Flat head screw

#25233 x4

Drawer runner

#41421 x2

Mount drawer runners

1. Note the holes when

extending drawer runner

41421 . The arrow at

the end of the drawer

runners must face

towards the front edge as

illustrated.

2. Extend the drawer

runner 41421 , and

attach one at head

screw 26020 in hole

nr. 1 on panel GA , as

illustrated.

3. Pull drawer runner

41421 backwards, and

attach the next at head

screw 26020 in hole

nr. 22, through the hole

in the drawer runner

41421 .

4. Extend drawer runner

41421 a bit forward, and

use an awl to pre-drill

a hole in hole nr. 24 of

drawer runner 41421 .

Then, insert at head

screw 25233 in that

hole.

5. Like step 4, use an awl

in hole nr. 12, and then

insert at head screw

25233 .

Repeat these 5 steps

for the remaining drawer

runner 41421 .

Assembly Instructions

Step 7

Step 8

# $PRPVIEW:{Pos_Beslag}

76428

76430

76427

76428

Beslag sættes ind i scala 1:2 som udgangspunkt

# $PRPVIEW:{Pos_Beslag}

76428

76430

76427

76428

Beslag sættes ind i scala 1:2 som udgangspunkt

Top

Bottom

Fittings you will need for this step:

# $PRPVIEW:{Pos_Beslag}

76428

76430

76427

76428

Beslag sættes ind i scala 1:2 som udgangspunkt

Wedges

#33204 x4

Fittings you will need for this step:

Screw

#26033 x18

Assemble proles

Insert wedges 33204

into the slots on the an-

gle ends of side proles

76427 + 76428 and

front prole 76430 .

Use a hammer for this

assembly step.

Attach panel

Place bottom panel IB

on top of the proles

as illustrated, and then

insert at head screw

26033 .

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos ASHWELL 806/3922 Bedienungsanleitung

Argos

Argos Le Marais 393/0782 Bedienungsanleitung

Argos

Argos 875/0383 Bedienungsanleitung

Argos

Argos Single Robe 234046 Bedienungsanleitung

Argos

Argos 700-3024 Bedienungsanleitung

Argos

Argos Stirling 345/8312 Bedienungsanleitung

Argos

Argos Belle HOME 886/8763 Bedienungsanleitung

Argos

Argos Nordic 1663886 Bedienungsanleitung

Argos

Argos Haversham Bedienungsanleitung

Argos

Argos Cheval 147/8985 Bedienungsanleitung

Argos

Argos 903/6240 Bedienungsanleitung

Argos

Argos SKYE WOOD Datenblatt

Argos

Argos New Penton 246/4943 Bedienungsanleitung

Argos

Argos Canterbury 3 DR Robe Bedienungsanleitung

Argos

Argos Stakka 475/9955 Bedienungsanleitung

Argos

Argos habitat DAXTON 941/1834 Bedienungsanleitung

Argos

Argos 245/7424 Bedienungsanleitung

Argos

Argos Tammy 918-2723 Bedienungsanleitung

Argos

Argos Avalon 4'6 Bedienungsanleitung

Argos

Argos TOBY 8559230 Bedienungsanleitung

Argos

Argos 239/2352 Bedienungsanleitung

Argos

Argos Cheval 147/5634 Bedienungsanleitung

Argos

Argos Marlow 424/1195 Bedienungsanleitung

Argos

Argos 461/8144 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung