Argos Habitat Winchester 3+2 Sideboard 417/9906 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk

or email: Help@ClickSpares.co.uk (quoting your original order number)

Alternatively, call the Spares Helpline on: 0370 112 1928.

For any other queries please contact the Customer Helpline on: 0345 640 2020

Important - Please read these instructions fully before starting assembly

Winchester - 3+2 Sideboard

Assembly Instructions - Please keep for future reference

ALR3162

417/9906

Width - 119.9cm

Depth - 39.4cm

Height - 76.8cm

Issue 1 - 14/07/15

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 44kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

overbalance protector kit

supplied or, an alternative fixing

method of your choice.

• Dispose of all packaging

carefully and responsibly.

Tools required

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(do not use for

fitting screws)

Components - Panels

Please check you have all the panels listed below

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk

or email: Help@ClickSpares.co.uk (quoting your original order number)

Alternatively, call the Spares Helpline on: 0370 112 1928.

For any other queries please contact the Customer Helpline on: 0345 640 2020

80%

x 2 12 3

Left Side (DF2803)

(74.6 x 37.4cm)

Left Divider (DF2807)

(62.4 x 37.2cm)

Top (DF3357)

(119.9 x 39.4cm)

Base (DF2806)

(112.9 x 37.3cm)

Right Side (DF2804)

(74.6 x 37.4cm)

Shelf (DF2813)

(33.3 x 34.9cm) x 2

Narrow Rail (DF2809)

(43.3 x 9.2cm) x 2

4Right Divider (DF2808)

(62.4 x 37.2cm)

Long Rail (DF2805)

(112.9 x 9.2cm) x 4

Front Plinth (DF2810)

(119.1 x 9.2cm)

Side Plinth (DF2386)

(37.4 x 9.1cm) x 2

Drawer Front (DF2811)

(42.7 x 19cm) x 3

Drawer Back

(W400-124)

(40 x 12.4cm) x 3

Left Drawer

Side (W350-124LH)

(35 x 12.4cm) x 3

Right Drawer

Side (W350-124RH)

(35 x 12.4cm) x 3

Door (DF3359)

(61.8 x 32.7cm) x 2

8 9

10 11

12 13 14 15

16 17 18 Back (X1155-665)

(115.5 x 66.5cm)

Drawer Base (T411-347)

(41.1 x 34.7cm) x 3

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Components - Fittings

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk

or email: Help@ClickSpares.co.uk (quoting your original order number)

Alternatively, call the Spares Helpline on: 0370 112 1928.

For any other queries please contact the Customer Helpline on: 0345 640 2020

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

A B

D F

G H I

Small locking

nut (F3) x 6

J K

Drawer runner (F1004) x 6

Large locking

nut (F900) x 26

Metal dowel (F901) x 32

Wooden dowel (F22) x 22

25mm Screw (F50) x 6 9mm Screw (F74) x 6

9mm Screw (F73) x 12 Plastic Nail (F91) x 6

P Q

Hinge plate

(F523) x 4 Hinge (F522) x 4

Shelf stud (F110) x 8

13mm Screw (F63) x 8

Wedgefix (F639) x 6

Knock-in Peg (F171GY) x 12

Bag of Nails

(F51) x 1

Handle

(F463) x 5

38mm Screw (F81) x 5

40mm Screw (F910) x 4

TStrap Screw Washer x 2

Overbalance protector kit (F269) x 1

Assembly Instructions

Step 1

x 3

13 14

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

13 14

Attach the handles

Attach a handle to

each of the drawer fronts

. using screw .

Note: Do not

overtighten the screw.

13 14

Step 7

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 2 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

x 3

Finished

front edge D

Finished

front edge

Finished

front edge

Assembly Instructions

Step 8

Prepare the left divider

a: Place 3 runners on

the left divider as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left divider .

c: Screw 2 metal

dowels into the left

divider .

Insert 2 large locking

nuts into the left

divider .

Note: The arrow on the

locking nuts must point

towards the hole in the

edge of the panel.

Tap 2 wooden dowels

into the left divider .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

10mm

Assembly Instructions

Step 9

Prepare the right

divider

a: Place 3 runners on

the right divider as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right divider .

c: Screw 2 metal

dowels into the right

divider .

Insert 2 large locking

nuts into the right

divider .

Tap 2 wooden dowels

into the right divider .

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

x 2

Prepare the 2 narrow

rails

Insert 2 large locking

nuts into each of the

2 narrow rails .

Tap 2 wooden dowels

into each of the 2 narrow

rails .

Finished

front edge

Fit the 2 narrow rails

onto the right divider

Push the 2 narrow rails

onto the right divider .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the narrow rails .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Fit the left divider

Push the left divider

onto the narrow rails .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the narrow rails .

Step 11

Step 12

Finished

front edge

Assembly Instructions

Step 13

Finished

front edge

Prepare the base

Insert 4 large locking

nuts into the base

Tap 2 wooden dowels

into the base .

Fit the base

Attach the base to

the left divider and

right divider with 4

screws .

Step 14

x 2

Prepare 2 of the long

rails

Screw 2 metal dowels

into 2 of the long rails .

Insert 2 large locking

nuts into 2 of the long

rails .

Tap 2 wooden dowels

into 2 of the long rails .

Step 15

Finished

front edge

Andere Argos Inneneinrichtung Handbücher

Argos

Argos avignon 544/2687 Bedienungsanleitung

Argos

Argos SKYE WOOD Datenblatt

Argos

Argos Silbury 4146922 Bedienungsanleitung

Argos

Argos 7592573 Bedienungsanleitung

Argos

Argos Aruba 617/2602 Bedienungsanleitung

Argos

Argos Half Width Tall Extra Deep Bookcase Bedienungsanleitung

Argos

Argos 603/4135 Bedienungsanleitung

Argos

Argos 1866968 Bedienungsanleitung

Argos

Argos Pacific 6 Seater Patio Set 651/1531 Bedienungsanleitung

Argos

Argos WOW 152/7252 Datenblatt

Argos

Argos Arvika 357/6823 Bedienungsanleitung

Argos

Argos 240/9922 Bedienungsanleitung

Argos

Argos 418/9329 Bedienungsanleitung

Argos

Argos KINGSTON 6029731 Bedienungsanleitung

Argos

Argos Lima Bedienungsanleitung

Argos

Argos Hallingford 305/2811 Bedienungsanleitung

Argos

Argos Small Pink Velvet Ottoman 452/9848 Bedienungsanleitung

Argos

Argos Darcy 428/5890 Bedienungsanleitung

Argos

Argos Penelope Ottoman 899/8190 Bedienungsanleitung

Argos

Argos 609/0117 Bedienungsanleitung

Argos

Argos 719/0023 Bedienungsanleitung

Argos

Argos 428/7070 Bedienungsanleitung

Argos

Argos Heavy Duty Bunk Bed 557/5554 Bedienungsanleitung

Argos

Argos Gloss Double HOME Wall Cabinet Grey Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung