Argos Malibu 3 Drawer 2 Door Robe Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 74.5cm

Depth - 50cm

Height - 181cm

Malibu - 3 Drawer 2 Door Robe

Assembly Instructions - Please keep for future reference 227/8232

258/7679

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 9 - 12/01/15

Important - Please read these instructions fully before starting assembly

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

ALR3033

238/3574

237/1287

258/2904

Issue 2 - 17/09/12 - Added notes to drawer wrap preparation stages telling customer the cams can be either surface of the wrap

279/1496

258/8032

279/1960

257/2512

262/6217

Issue 3 - 11/10/13 - 6 new codes added to front page.

Issue 4 - 18/02/14 - 5 new HD codes added to front page.

Issue 5 - 25/03/14 - New version with metal runners, 3 piece drawer wraps etc...

Issue 6 - 02/06/14 - Code and size of the Back updated to X1710-740

Issue 7 - 30/06/14 - Corrected size of Drawer Front to 710 x 156mm on panels page.

255/7788

247/7662

249/6612

278/0830

278/5189

266/7355

Issue 8 - 04/09/14 - Changed Drawer Back description to W682-124BCK.

Issue 9 - 12/01/15 - Remove Overbalance bracket and scew.

Add overbalance strap kit.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 49.5kgs. Please

lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

strap supplied.

• Dispose of all packaging

carefully and responsibly.

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Drawer Divider - D0034A

145 x 249mm

waterfall

80%

x 2

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

2 5

Left Side (D2871A)

(1808 x 496mm)

Base (D2841A)

(716 x 476mm)

Top (D2870A)

(716 x 494mm)

Right Side (D2872A)

(1808 x 496mm)

Plinth (D2873A)

(716 x 92mm) x 2

Back Rail (D2847A)

(716 x 92mm)

Rail (D2874A)

(716 x 92mm)

Drawer Base (T693-367)

(693 x 367mm) x 3

Left Drawer Side (W370-124LH)

(370 x 124mm) x 3

Right Drawer Side (W370-124RH)

(370 x 124mm) x 3

Door (D2857A)

(1198 x 353mm) x 2

Drawer Back (W682-124BCK)

(682 x 124mm) x 3

Drawer Front (D2783A)

(710 x 156mm) x 3

Back (X1710-740)

(1710 x 740mm)

7 8

Hanging Rail (FHR704)

(704mm long)

Please check you have all the fittings listed below

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 14

Metal dowel (F901) x 6

D F

40mm Screw (F910) x 14

25mm Screw (F50) x 8 Handle (F631) x 8

Nail (F51) x 33

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

M ON

P Q

Small locking

nut (F3) x 6

Rail holder

(F1014) x 2

13mm Screw (F63) x 10

19mm Connecting bolt

(F461) x 2

Hinge plate

(F523) x 4

Hinge (F522) x 4

25mm Connecting sleeve

(F432) x 2

Ruler - Use this ruler to help correctly identify the screws

Tools required

R S

Drawer runner (F1004) x 6

Knock-in Peg (F171GY) x 12

Plastic Nail (F91) x 5

9mm Screw (F74) x 6

9mm Screw (F73) x 12

Wedgefix (F639) 12

Rule

Square

Scissors

Spirit level

Hammer

Bradawl

Electric drill

Step ladder

Cross-head screwdriver

Eye protection (when

using a hammer or drill)

TStrap

Screw Washer x 2

Overbalance protector kit (F269) x 1

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

80%

Step 1

x 3

x 3x 3

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the small groove is on the inside, as shown.

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

6 7

Attach the handles

Attach a handle to

each of the drawer fronts

. using screw .

Note: Do not

overtighten the screw.

x 3

6 7

x 3

Step 7

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 4 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

Finished

front edge

Assembly Instructions

Step 8

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 1

80% x 3

Finished

front edge

Finished

front edge

Finished

front edge

Prepare the left side

a: Place 3 runners on

the left side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

c: Fit 2 hinge plates

onto the left side

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the left side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Assembly Instructions

Step 9

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Prepare the right side

a: Place 3 runners on

the right side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

c: Fit 2 hinge plates

onto the right side

making sure that the slot

is facing towards the

finished front edge.

Push a rail holder into

the right side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Prepare top and base

a: Tap 2 wooden

dowels into the ends

of the top .

b: Tap 2 wooden

dowels into the ends

of the base .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Fit the top and base

to the right side

Push the top

onto the right side

and secure with 2

screws .

Push the base

onto the right side

and secure with 2

screws .

Step 11

plain chipboard surface

10mm

Finished

front edge

Finished

front edge

plain chipboard surface

Assembly Instructions

Fit the rail

Push the rail onto the

right side .

Finished

front edge

Finished

front edge

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Step 12

Step 13

Prepare the 2 plinths,

the rail and the back

rail

a: Tap 2 wooden

dowels into the ends

of the 2 plinths .

b: Tap 4 wooden

dowels into the ends

of the rail .

c: Tap 2 wooden

dowels into the ends

of the back rail .

x 2

Plain chipboard

surface

Plain chipboard

surface

Finished

front edge

Plain chipboard

surface

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 831/9188 Bedienungsanleitung

Argos

Argos 1516610 Bedienungsanleitung

Argos

Argos Landon 241/7990 Bedienungsanleitung

Argos

Argos Home Wow Oslo 482/2844 Bedienungsanleitung

Argos

Argos ORLEANS Bedienungsanleitung

Argos

Argos Wooden Filer Bedienungsanleitung

Argos

Argos Henley 428/0369 Bedienungsanleitung

Argos

Argos Verona 610/3475 Bedienungsanleitung

Argos

Argos ASTON 152/5546 Bedienungsanleitung

Argos

Argos 603/0263 Bedienungsanleitung

Argos

Argos SAN DIEGO 395/6199 Bedienungsanleitung

Argos

Argos Foley 333/7976 Datenblatt

Argos

Argos HOME New Pagnell 3 Dr 4 Drw Wardrobe... Bedienungsanleitung

Argos

Argos 460/9830 Datenblatt

Argos

Argos 875/9047 Bedienungsanleitung

Argos

Argos Jakob 851/7739 Bedienungsanleitung

Argos

Argos Le Marais Double Unit Grey 502/6797 Bedienungsanleitung

Argos

Argos 166/6890 Bedienungsanleitung

Argos

Argos Brooklyn 8529198 Bedienungsanleitung

Argos

Argos Hygena Genoa 464/2718D Bedienungsanleitung

Argos

Argos Florenza 162/2377 Bedienungsanleitung

Argos

Argos Malibu 617/1225 Bedienungsanleitung

Argos

Argos Brooklyn 709/2688 Bedienungsanleitung

Argos

Argos 033 3042 Series Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung