Argos Malibu 617/1225 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 120cm

Depth - 49cm

Height - 72cm

Malibu - Desk

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 9 - 22/11/13

Important - Please read these instructions fully before starting assembly

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

ALR2448

11/02/11 - Changes to dimensions shown on the front page.

Width now 120cm and Depth now 49cm.

29/03/11 - Added Argos codes 719/1716 and 719/1675

Issue 4 - 16/05/12 - Argos codes added.

Issue 5 - 04/09/12 - Deleted obsolete Argos codes, 630/2719 and 630/2654.

Issue 6 - 18/03/13 - Argos code added for Oak - 617/3876

Issue 7 - 23/07/13 - Argos code added - 122/7545

Issue 8 - 10/10/13 - 6 new Argos codes added and 5 obsolete ones deleted.

Issue 9 - 22/11/13 - Panels codes are now issue B due to new Black colour board.

2 cat codes that were removed for the previous issue have been added back on

to complete the final runs of those colours (Maple/Blue 719/1716 and Maple/Pink 719/1675.

173/8821

144/3642

171/7110

170/8356

181/7467

151/9514

719/1716

719/1675

617/1225

617/2107

617/1139

617/3876

305/0253

305/0260

122/7545

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 21kgs. Please lift

with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Left Side (D0094B)

(706 x 353mm)

Drawer Divider - D0034A

145 x 249mm

waterfall

Top (D0096B)

(1200 x 490mm)

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Drawer Wrap (W161)

(943 x 95mm) x 3

Right Side (D0095B)

(706 x 353mm)

2Bookcase End (D0097B)

(706 x 186mm) x 2

Shelf (D0098B)

(394 x 182mm) x 3

Drawer Front (D0101B)

(345 x 196mm) x 3

Drawer Base x 3 (T161)

(299 x 330mm)

Back (X731)

(626 x 373mm)

Rail (D0100B)

(349 x 80mm)

Plinth (D0099B)

(349 x 92mm)

Please check you have all the fittings listed below

Tools required

Glue Safety - Take care when using glue, please follow the advice below

Skin contact: Remove contami-

nation by washing with soap and

water. This procedure should be

followed prior to aeting and

drinking.

Eye contact: Rinse immediately

with clean water for 15 minutes

and seek medical advice.

If swallowed: Seek medical

advice immediately.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• From time to time check that

there are no loose screws on

this unit.

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 8

Metal dowel (F901) x 14

Large locking

nut (F900) x 8

Small locking

nut (F3) x 6

40mm Screw (F910) x 16

25mm Screw (F50) x 3

Rule Scissors Hammer Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

R (F601)

L (F600)

F599

Drawer stops (F599) x 6

Runners (F600) x 3 and (F601) x 3

Nail holder (F149) x 1

Handle (F631) x 3

Nail (F51) x 9

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Prepare drawer fronts

and wraps x 3

a: Screw 2 x metal

dowels into the holes

shown on the back of the

drawer front .

Note: Tighten metal

dowels up fully against

the panels.

b: Insert 2 small locking

nuts into the holes

shown on the drawer

wrap .

Note: Arrow on locking

nut must point towards

hole in edge of panel.

Assemble drawers x 3

a: Place drawer base

into the narrow slot on

the drawer wrap .

Fold wrap around the

base.

b: Turn drawer wrap

assembly over and push

onto the back of the

drawer front .

Note: Turn locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

9 9

Step 1

Step 2

Note: Due to the manufacturing

process, the holes for the

locking nut can be on either

surface of the drawer wrap.

Note: The locking nuts can be on

either surface of the drawer sides.

Make sure that the small groove

is on the inside, as shown.

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Attach drawer stops

Carefully break off the 2

drawer stops (F599) from

each pair of the drawer

runners .

Push the drawer stops

fully through the drawer

wraps from the

inside.

SNAP!

F599

Attach the handles

Attach a handle to

each drawer front using

screw .

Note: Do not

overtighten the screw.

F599

Step 3

Step 4

Assembly Instructions

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

Rebated Edge

F73

COVERED EDGE

Use 2nd hole in from front of

Runner F1004 to fit 1st F73 then

fit other F73 to match other hole.

F1004

When you insert F900,

make sure the arrow is

pointing towards the hole

in the edge of the panel.

F900

F73

F1004

COVERED EDGE

Prepare left and right

side

Separate runners .

a: Push fit 3 left

runners marked ‘L’

into the holes shown on

left side .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

Insert 2 large locking

nuts as shown.

Note: Arrow on locking

nut must point towards

hole in edge of panel.

Tap in wooden dowel

as shown.

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

b: Push fit 3 right

runners marked ‘R’

into the holes shown on

right side .

Insert 2 large locking

nuts as shown.

Tap in wooden dowel

as shown.

10mm

LF600

Finished

front edge

Finished

front edge F601

Step 5

Assembly Instructions

Prepare plinth and rail

Tap 2 wooden dowels

into the ends of both the

plinth and rail

Note: The plinth will

be finished with the main

unit colour on one

surface.

Note: The rail may be

plain chipboard or its

colour may differ from

the main unit colour.

6 7

Main unit

colour

Main unit

colour

Main unit

colour

Fit plinth to the right

side

Attach the plinth to

the right side with the

dowel already fitted and

secure with screw .

Fit rail to the right

side

Attach the rail to the

right side with the

dowel already fitted and

secure with screw .

Finished

front edge

(349 x 80mm)(349 x 92mm)

Step 6

Step 7

Step 8

Assembly Instructions

Fit left side

Attach the left side to

the plinth and rail

using 2 x screws .

Fit back panel

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit 5mm down

from the top of the side

panels.

Use the nail guide to

hold the nails vertical

and at the correct

distance whilst you nail

down the sides of the

back .

Note: Nails should

be spaced about 150mm

apart.

5mm

Step 9

Step 10 The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Assembly Instructions

Prepare the 2

bookcase ends

Insert 2 large locking

nuts into each

bookcase end .

Tap a wooden dowel

into the end of each

bookcase end .

Fit shelves

Attach 3 shelves to

the bookcase ends

using 12 x screws .

Finished

surface

inside

surface

inside

surface

inside

surface

Step 11

Step 12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos HOME New Pagnell Deep 3+2 Chest 610/8793 Bedienungsanleitung

Argos

Argos Dalton Metal 3ft Frame 656/9624 Bedienungsanleitung

Argos

Argos Habitat Winchester 3+2 Sideboard 417/9906 Bedienungsanleitung

Argos

Argos Camden 239/9472 Bedienungsanleitung

Argos

Argos Nordic 4x2 Drawer Chest Bedienungsanleitung

Argos

Argos San Diego 343/7058 Bedienungsanleitung

Argos

Argos COT Bedienungsanleitung

Argos

Argos 1866968 Bedienungsanleitung

Argos

Argos Habitat Maine 2 Shelf Small Bookcase... Bedienungsanleitung

Argos

Argos Camden 305/0772 Bedienungsanleitung

Argos

Argos Twister CD/DVD tower Bedienungsanleitung

Argos

Argos Westminster 424/3485 Bedienungsanleitung

Argos

Argos New Hallingford 228/6640 Bedienungsanleitung

Argos

Argos Small Mustard Fabric Ottoman 716/5467 Bedienungsanleitung

Argos

Argos Hartley 331/1538 Bedienungsanleitung

Argos

Argos Fabric Ottoman With 2 Small Stools 755/2238 Bedienungsanleitung

Argos

Argos Lawson 402/4439 Bedienungsanleitung

Argos

Argos Anderson Coffee Table 290/8021 Bedienungsanleitung

Argos

Argos Amersham 706/1262 Bedienungsanleitung

Argos

Argos Cheval 147/8985 Bedienungsanleitung

Argos

Argos New Penton 245/7864 Bedienungsanleitung

Argos

Argos Arvika 335/9789 Bedienungsanleitung

Argos

Argos Marlow 424/1195 Bedienungsanleitung

Argos

Argos Malibu 621/3310 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung