Argos Malibu 305/1805 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 145.5cm

Depth - 50cm

Height - 181cm

Malibu - 3 Drawer 2+2 Door Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 3 - 03/09/13

Important - Please read these instructions fully before starting assembly

ALR2846

305/1805

305/1795

305/1829

305/1788

305/1812

Issue 2 - 12/06/13 - Drawer Base code corrected to T162.

Issue 3 - 03/09/13 - Rail Holders now secured with screws - Quantity of 6 x 1/2 csk screws increased from 24 to 30.

The number of Nail Screws and Back Holders have been reduced to 8

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 91kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

4Top (D2035A)

(1423 x 494mm)

5Base (D2040A)

(1423 x 494mm)

Drawer Front (D2044A)

(707 x 157mm) x 3

32 Drawer Wrap (W162)

(1308 x 95mm) x 3

Drawer Base (T162)

(299 x 695mm) x 3

Components - Panels

Please check you have all the panels listed below

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Left End (D2036A)

(1808 x 496mm)

7Right End (D2037A)

(1808 x 496mm)

Left Divider (D2038A)

(1684 x 477mm)

Right Divider (D2039A)

(1684 x 477mm)

8 9

15 Large Door (D2042A)

(1678 x 352mm) x 2

16 Small Door (D2043A)

(1198 x 352mm) x 2

Short Back (X953)

(1210 x 726mm)

Long Back (X952)

(1710 x 362mm) x 2

10 Plinth Rail (D2046A)

(1423 x 92mm) x 2

Long Hanging Rail (FHR704)

(704mm long)

Short Hanging Rail (FHR330)

(330mm long) x 2

11 Fixed Shelf (D2041A)

(714 x 476mm) x 2

Loose Shelf (D2045A)

(338 x 476mm) x 2

Please check you have all the fittings listed below

Tools required

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 28

Metal dowel (F901) x 6

D E

G H I

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Small locking

nut (F3) x 6

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

40mm Screw (F910) x 28

J K

Electric drill

(do not use for

fitting screws)

Nail (F51) x 44

25mm Screw (F50) x 10

13mm Screw (F79) x 1

13mm Screw (F63) x 30

Rail holder

(F1014) x 6 Bracket (F327 x 1)

M N R (F601)

L (F600)

F599

Drawer stops (F599) x 6

Runners (F600) x 3 and (F601) x 3

Hinge (F522) x 12

P Q

Hinge plate (F523) x 12

Handle (F631) x 10

Shelf stud (F110) x 8

Back holder (F276) x 8 Nail screw (F277) x 8

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Step 2

x 3

Prepare the 3 drawer

fronts and 3 drawer

wraps

a: Screw 2 metal dowels

. into the holes on the

back of the drawer fronts

. .

Note: Tighten the metal

dowels up fully against

the panels.

b: Insert 2 small locking

nuts into the holes

shown on the drawer

wrap .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Assemble the drawers

a: Place the drawer

base into the narrow

slot on the drawer wrap

. . Fold the wrap

around the base.

b: Turn each of the

drawer wrap assemblies

over and push them onto

the back of the drawer

fronts .

Note: Turn the locking

nuts clockwise to

secure the panels - more

than 1/2 a turn.

1Drawer Front (D2044A)

(1707 x 157mm) x 3

32 Drawer Wrap (W162)

(1308 x 95mm) x 3

Drawer Base (D2044A)

(299 x 695mm) x 3

80% x 3

Assembly Instructions

Step 3

Push the drawer stops

into the drawer wraps

Carefully break off the 2

drawer stops (F599) from

each pair of the drawer

runners .

Push the drawer stops

fully through the large

drawer wraps from

the inside.

SNAP!

Attach the handles

Attach 2 handles to

each drawer front

using screws .

Note: Do not

overtighten the screws.

F599

Step 4

Step 5

x 3

x 2

10mm

Prepare the 2 fixed

shelves

Tap 4 wooden dowels

into each of the 2 fixed

shelves .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Finished

front edge

80% x 3

Finished

front edge

Assembly Instructions

Step 6

Prepare the left

divider

Separate runners .

a: Push fit the 3 left

runners marked ‘L’

into the holes shown on

the left divider .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

Push a rail holder into

the left divider . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Fit 3 hinge plates onto

the left divider ,

making sure that the slot

is facing towards the

finished front edge.

Turn the left divider

over

b: Tap 4 wooden

dowels into the left

divider .

Push a rail holder into

the left divider . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Prepare left and right

side

Separate runners .

a: Push fit the left

runner marked ‘L’ into

the holes shown on left

side .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

Insert large locking

nut as shown.

Note: Arrow on locking

nut must point towards

hole in edge of panel.

Tap in wooden dowel

as shown.

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

b: Push fit the right

runner marked ‘R’

into the holes shown on

left side .

Insert large locking

nut as shown.

Tap in wooden dowel

as shown.

F600

Finished

front edge

Turn the left

divider over

80% x 2

90% x 1

80% x 1

Finished

front edge

Assembly Instructions

Step 7

Prepare the right

divider

a: Push fit the 3 right

runners marked ‘R’

into the holes shown on

the right divider .

Push a rail holder into

the right divider .

Make sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Fit 3 hinge plates onto

the right divider ,

making sure that the slot

is facing towards the

finished front edge.

Turn the right divider

over

b: Tap 4 wooden

dowels into the right

divider .

Push a rail holder into

the right divider .

Make sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

RF601

Finished

front edge

Turn the left

divider over

Assembly Instructions

Step 8

Prepare left and right

side

Separate runners .

a: Push fit the left

runner marked ‘L’ into

the holes shown on left

side .

Note: Runners must be

be fitted flat against the

panel. If necessary

gently tap into final

position.

Insert large locking

nut as shown.

Note: Arrow on locking

nut must point towards

hole in edge of panel.

Tap in wooden dowel

as shown.

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

b: Push fit the right

runner marked ‘R’

into the holes shown on

left side .

Insert large locking

nut as shown.

Tap in wooden dowel

as shown.

Finished

front edge

Finished

front edge

Finished

front edge

Fit the fixed shelves

to the left divider

Push the 2 fixed shelves

. onto the left divider

and secure with 4

screws .

11 8

Fit the right divider

Push the right divider

onto the 2 fixed shelves

. and secure with 4

screws .

D11

Step 9

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Prepare the top and

base

Tap 4 wooden dowels

into the top .

Tap 4 wooden dowels

into the base .

Finished

front edge

plain chipboard surface

Finished

front edge

plain chipboard surface

Fit the top and base

Push the top and

base onto the 2

dividers and and

secure with 8 screws .

Step 11

8 9

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Jakob 851/7739 Bedienungsanleitung

Argos

Argos TOBY 8559230 Bedienungsanleitung

Argos

Argos Scandinavia Bedienungsanleitung

Argos

Argos Heart of House kent 3 door 3 drawer wardrobe... Bedienungsanleitung

Argos

Argos Canterbury 5 DRW CHEST Bedienungsanleitung

Argos

Argos Habitat 600/5779 Bedienungsanleitung

Argos

Argos Malibu Series Bedienungsanleitung

Argos

Argos HOME MID BACK GAMING CHAIR BLK 608/8734 Bedienungsanleitung

Argos

Argos Jenson Mirror Bedienungsanleitung

Argos

Argos Mix Bedienungsanleitung

Argos

Argos 906/4023 Bedienungsanleitung

Argos

Argos Porto 650/3037 Bedienungsanleitung

Argos

Argos 617/3113 Bedienungsanleitung

Argos

Argos 875/5106 Bedienungsanleitung

Argos

Argos Thornbury 343759 Bedienungsanleitung

Argos

Argos Aspley 498/9622 Bedienungsanleitung

Argos

Argos 213/7816 Bedienungsanleitung

Argos

Argos Chequer 399/901 Bedienungsanleitung

Argos

Argos 603/3796 Bedienungsanleitung

Argos

Argos Iceland 178/6361 Bedienungsanleitung

Argos

Argos Adult Malibu 532/8038 Bedienungsanleitung

Argos

Argos OSCAR 389/7612 Datenblatt

Argos

Argos Osaka 2283935 Bedienungsanleitung

Argos

Argos Dalton 228/5713 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung