Assembly & User Instructions - Please keep for future reference 745/2761
OPTI FULL SIZE NETBALL
Important – Please read these instructions fully before assembly or using
These instructions contain important information which will help you get the best from your
equipment and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline:0345 6402020
Issue 1 9/26/16
Components - Parts
Assemble Instructions
This product should be assembled by two adults
prior to use.
The suppliers cannot accept responsibility for
any damage caused to or by the product through
misuse or incorrect installation.
Please read the Instructions carefully and check
all component parts before assembly.
Before assembly carefully choose the location of
the finished unit. The chosen area should be flat,
smooth and free from obstructions, gravel or
sharp objects.
The base should be fully filled with either water or
sand before assembly.
When moving the unit be careful not to cause
damage by dragging the base.
This equipment is for home use only and it is not
designed or intended for formal matches or
competition.
Do not wear any type of jewellery (rings,
watches, necklaces etc) while using this
equipment. Such Items can become caught
against the rim or the net and cause serious
Injury .
Do not use this equipment during severe weather
conditions as the unit may fall over. When severe
weather is expected adjust the unit to Its lowest
height and store in a safe and secure place.
Check the equipment for loose and damaged
parts prior to each use. If any problems are found
discontinue use immediately.
This equipment must be assembled,
Do not hang or
swing on the ring or
use it to “Slam
Dunk” or anything
similar where you
may touch the ring, Attach tube (E) to water base (A)
.Use metal Axle (J) put it thorugh
wheel (K) Tube (E) and water base
(A) .
Connect tube (C) into tube (D) ,screw
both frame by bolt (S) Put Tube (D)
into (E) , Twist to lock the tube in
place.
Note when adjusting the height of the pole,match
with the white heights line on the ploe.Exceeding
the white line may cause dangerous
Fill the water base (A) with water or
sand to secure it in place. Cover with
the supplied plastic cap (Q)
