ARRI CLAYPAKY TAMBORA LINEAR 60 Bedienungsanleitung

INS RUC ION MANUAL

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

INDEX

ENGLISH

Page Contents

2 1. Safety information

3 2. Unpacking and preparation

3 3 Installation and start-up

3 3.1 Fixture overview

4 3.2 Installing the fixture

5 3.3 Connecting to mains supply

5 3.4 Connecting the control signal line: DMX / Art-Net

6 3.5 Switching on the fixture and basic SetUp

7 4. Maintenance

7 4.1 Fuses replacing

8 4.2 Periodical cleaning & Caution

9 4.3 Battery removal

10 5. Dimensions

10 6. Cause and solution of problems

CL2021

TAMBORA LINEAR 60

SAFE Y INFORMA ION

IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link:

www.claypaky.com

Ref: FIS02J – Safety Information Tambora inear 60

INFORMAZIONI DI SICUREZZA

IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link:

www.claypaky.com

Rif: FIS02J – Safety Information Tambora inear 60

INFORMA IONEN ZUR SICHERHEI

WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem ink auffindbar:

www.claypaky.com

Ref: FIS02J – Safety Information Tambora inear 60

INFORMACIONES DE SEGURIDAD

IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

www.claypaky.com

Ref: FIS02J – Safety Information Tambora inear 60

CONSIGNES DE SÉCURI É

IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives

à ce produit, disponibles en version digitale au lien suivant:

www.claypaky.com

Réf. : FIS02J – Safety Information Tambora inear 60

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекоменд ет внимательно прочитать и сохранить инстр кцию по технике безопасности

данного изделия, которая всегда дост пна в электронном формате по след ющей ссылке:

www.claypaky.com

Наименование: FIS02J - Safety Information Tambora inear 60

1. SAFE Y INFORMA ION

Packing contents - Fig. 1

TAMBORA LINEAR 60

2. UNPACKING AND PREPARA ION

Fan

Handle

Fan

Neutrik PowerCON

TRUE1 (IN/OUT)

Safety loop

Fuse

LCD Display

User buttons

5pin DMX IN/THRU

Ethernet

3. INS ALLA ION AND S AR -UP

3.1 Fixture overview

Continue ‘

TAMBORA LINEAR 60

Projector installation - Fig. 3

The projector can be installed on the floor resting on specific rubber feet, on a truss, on the ceiling or wall.

WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105041-003 available upon request).

his must be secured to the projector support structure and then hooked to the fastening point at the centre of the fixture.

3.2 Installing the fixture

TAMBORA LINEAR 60

Continue ‘

Connections to the power mains - Fig. 5

Power

Supply

Connecting and disconnecting the power cord - Fig. 4

DMX 512

SIGNAL

SCREEN

DMX 512

5 PIN

SIGNAL

Ethernet

Connections to the control signal line (DMX) - Fig. 6

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. End connections must be made using X R type 5-pin male/female

connectors. A terminating plug must be inserted on the last projector with a resistance of 120 (minimum 1/4 W) between terminals 2 and 3.

IMPOR AN : The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the

shield braid and pin 1 of the connectors.

3.3 Connecting to mains supply

3.4 Connecting the control signal line: DMX / Art-Net

TAMBORA LINEAR 60

Switching on the projector - Fig. 7

Switch-on the fixture. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Model Firmware Dmx Address xxx System errors

ambora Version X.X.X .........................

Linear 60 Date - Hour .........................

The control panel (Fig. 7) has a display and buttons for the complete programming and management of the projector menu. The display can be in one

of two conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.

During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

key will be cancelled.

Dmx Address

War ning Message

3.5 Switching on the fixture and basic SetUp

Reversal of the display - Fig. 8

To activate this function, press UP

and DOWN

keys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

Setting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

The address can also be set with the projector switched off.

Functions of the buttons - Using the menu

Confirms the displayed value, or activates the displayed function, or enters the successive

menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level

Enters the successive menu

DOWN

EFT

RIGHT

TAMBORA LINEAR 60

Fuse replacing - Fig. 9

Each Tambora inear 60 has 1 fuse T8A 250V, associated with the main power cord connection.

T8A 250V

Continue ‘

4. MAIN ENANCE

4.1 Fuse replacing

Setting addresses and options with the projector disconnected

The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity

supply. All that is needed is to press

RIGHT

to momentarily activate the display and thus access the settings. Once the required operations have

been carried out, the display will switch off again after a wait time of 30 seconds.

USING HE MENU:

1) Press EFT

once – “Main Menu” appears on the display.

2) Use the UP

and DOWN

keys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Informations (Informations Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functionning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.

3) Press

to display the first item in the selected menu.

4) Use the UP

and DOWN

keys to select the MENU items.

WARNING:

no alcohol

TAMBORA LINEAR 60

CAU ION:

•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The

frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality

of the working environment (air humidity, presence of dust, salinity, etc.).

It is recommended that the projector undergoes an annual service by a qualiﬁed technician for special maintenance involving at least the

following operations:

- General cleaning of internal parts.

- General visual check of the internal components, cabling, mechanical parts, etc.

- Electrical, photometric and functional checks; eventual repairs.

Cleaning the LED cover

Only use neutral soap and water to clean the ED cover, then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other

detergent could damage the ED cover).

4.2 Periodical cleaning & Caution

Parts requiring frequent cleaning.

Light collimation system

This product contains internal light

collimation system. Avoid intense

light from any angle.

TAMBORA LINEAR 60

This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the

regulation in force.

4.3 Battery removal

(2.91")

Rotating angle

600

(23.62")

180°

172

(6.77")

5. DIMENSIONS

TAMBORA LINEAR 60

THE PROJECTOR WI NOT SWITCH ON

TROUBLE

E ECTRONICS NON-OPERATIONA

DEFECTIVE PROJECTION

REDUCED UMINOSITY

POSSIBLE CAUSES CHECKS AND REMEDIES

No power supply.

ED burnt out or defective.

Signal transmission cable faulty or disconnected.

Incorrect addressing.

Fault in the electronic circuits.

Optic fault.

Dust or grease deposits.

Check the power supply voltage.

Call an authorised technician.

Replace the cables.

Check addresses (see instructions).

Call an authorised technician.

Clean (see instructions).

6. CAUSE AND SOLU ION OF PROBLEMS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ARRI Beleuchtungsausrüstung Handbücher

ARRI

ARRI M Series Bedienungsanleitung

ARRI

ARRI ARRILITE 2000 Plus Handbuch

ARRI

ARRI SkyPanel S30 Bedienungsanleitung

ARRI

ARRI Orbiter Einrichtungshandbuch

ARRI

ARRI Orbiter L2.0039439 Bedienungsanleitung

ARRI

ARRI SkyPanel X Preliminary Bedienungsanleitung

ARRI

ARRI EB MAX 12/18 Bedienungsanleitung

ARRI

ARRI Orbiter L2.0039421 Bedienungsanleitung

ARRI

ARRI L0.0003381 Bedienungsanleitung

ARRI

ARRI L1.31230TA Bedienungsanleitung

ARRI

ARRI L1.0001764 Bedienungsanleitung

ARRI

ARRI ARRIMAX 18/12 Bedienungsanleitung

ARRI

ARRI L5 Bedienungsanleitung

ARRI

ARRI SkyLink Bedienungsanleitung

ARRI

ARRI ARRI D 5 Bedienungsanleitung

ARRI

ARRI SkyPanel Handbuch

ARRI

ARRI L7 Bedienungsanleitung

ARRI

ARRI Orbiter Anleitung zur Verwendung

ARRI

ARRI SkyPanel Bedienungsanleitung

ARRI

ARRI L10-C Bedienungsanleitung

ARRI

ARRI ARRI D 5 Bedienungsanleitung

ARRI

ARRI DAYLIGHT 18/12 PLUS Bedienungsanleitung

ARRI

ARRI ARRILITE 750 Plus Bedienungsanleitung

ARRI

ARRI MaxMover DayLight Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung