Art's-Way Manufacturing 6812 Bedienungsanleitung

Art’s-Way Manufacturing Co., Inc.

Model 6812-

613600 - Hydraulic Radiator Kit

Illustrated Parts List

619050

Issued March 2016

KIT INSTRUCTIONS

1. MOUNT THE ASSEMBLED COOLER KIT AS SHOWN WITH THE BOTTOM OF THE COOLER

ROUGHLY EVEN WITH THE TOP OF THE HYDRAULIC TANK.

2. DISCONNECT THE OIL RETURN HOSE FROM THE OIL FILTER, LEAVE THE 90° FITTING

INSTALLED.

3. RECONNECT THE OIL RETURN HOSE TO THE BOTTOM OF THE OIL COOLER.

4. CONNECT THE NEW INCLUDED HOSE TO THE TOP OF THE OIL COOLER AND THEN TO THE

OIL FILTER, ADJUST THE DIRECTION OF THE 90° FITTINGS AS NECESSARY.

5. REMOVE THE ELECTRICAL COVER FROM THE CENTER AXLE SUPPORT BEAM NEAR THE

CENTER OF THE MACHINE.

6. DRILLING 2 HOLES, MOUNT THE FAN CONTROLLER TO THE UNDERSIDE OF THE ELECTRICAL

COVER.

7. LOCATE THE WHITE AND BLUE WIRES WHICH ARE PART OF THE CURRENT HARVESTER

WIRE HARNESS.

8. CONNECT THE RED WIRE FROM THE FAN CONTROLLER TO THE BLUE WIRE (KEYED ON) ON

THE HARVESTER HARNESS.

9. CONNECT THE WHITE AND BLACK WIRES FROM THE FAN CONTROLLER TO THE WHITE

WIRE (GROUND) ON THE HARVESTER HARNESS

10. CONNECT THE OIL COOLER HARNESS TO THE FAN AND THEN TO THE FAN CONTROLLER.

11. RE-INSTALL THE ELECTRICAL COVER, LOOPING ANY EXCESS WIRES UNDERNEATH

BEFORE TIGHTENING DOWN.

INSTRUCTIONS

NOTES:

INCLUDES MANUAL P/N: 613620

INCLUDES HOSE P/N: 604030

INCLUDES FAN CONTROLLER: 613610

INCLUDES JUMPER HARNESS: 613790

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

1 021180

WASHER, LOCK 3/8

2021190

WASHER, FLAT 3/8 STD

3468370

BOLT, U 1/2-13 X 2.06 X 4.25

4530160

FITTING, HYD 90°

5600050

BOLT, HFH 3/8-16 X 1.00"

6600120

NUT, HFH NYLOC 3/8-16

7 600140

NUT, HFH NYLOC 1/2-13

8612510

COOLER, HYDRAULIC OIL

9613320

BOLT, SHCS 3/8-16

10 613630

FLAP, OIL COOLER

11 615150

MOUNT, OIL COOLER

12 615190

TUBE, SPACER

13 615310

ROD, THREADED 3/8-16

14 615525

SHROUD, OIL COOLER

DRAWING NO.

613600

KIT, OIL COOLER

1:3

6812 BOLT-ON

LISTED

N. WHITMAN

6812

E.C.N.

DATE

APPR

DESCRIPTION

LTR

MATERIAL

REV.

EP#

REVISIONS

DRAWN

CHK

APPR

MACHINING DRAWINGS: REMOVE

ALL BURRS & SHARP EDGES.

MODEL

NOTE: DO NOT SCALE

EXCEPT AS MAY BE OTHERWISE PROVIDED BY

CONTRACT. THESE DRAWINGS AND SPECIFI-

CATIONS ARE THE PROPERTY OF ARTS-WAY

MFG. CO., ARE ISSUED IN STRICT CONFIDENCE,

AND SHALL NOT BE REPRODUCED OR COPIED,

OR USED AS THE BASIS FOR THE MANUFACTURE

OR SALE OF APPARATUS WITHOUT PERMISSION.

TITLE

DATE

SCALE

DRAWING NO.

SIZE

Art's-Way Manufacturing Co., Inc.

Phone: (712) 864-3131

Fax: (712) 864-3154

Armstrong, Iowa 50514-0288

±.010

±.O30

±.060

(.XXX)

(.XX)

(.X)

ANGLES ± 1°

THREE PLACE

TWO PLACE

ONE PLACE

DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED

NEW RELEASE ON SOLIDWORKS

NRW

464.97

WEIGHT

SIMILAR PART(S):

12/18/15

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 021180 WASHER, LOCK 3/8 4

2 021190 WASHER, FLAT 3/8 STD 4

3 468370 BOLT, U 1/2-13 X 2.06 X 4.25 2

4 530160 FITTING, HYD 90° 2

5 600050 BOLT, HFH 3/8-16 X 1.00” 3

6 600120 NUT, HFH NYLOC 3/8-16 15

7 600140 NUT, HFH NYLOC 1/2-13 4

8 612510 COOLER, HYDRAULIC OIL 1

9 613320 BOLT, SHCS 3/8-16 4

10 613630 FLAP, OIL COOLER 1

11 615150 MOUNT, OIL COOLER 1

12 615190 TUBE, SPACER 4

13 615310 ROD, THREADED 3/8-16 4

14 615525 SHROUD, OIL COOLER 1

Art’s-Way Manufacturing Co., Inc. TECHNICAL MANUALS

Manuals are available from your local dealer or Art’s-Way Manufacturing Co., Inc. for the operation, service, and repair of your

machine. For prompt convenient service, contact your local dealer for assistance in obtaining the manuals for your machine.

Your local dealer can expedite your order for operator manuals, illustrated parts catalogs, service manuals, and maintenance

records.

Always give the Machine Name, Model, and Serial Number so your local dealer can provide the correct manuals for your

machine.

Art’s-Way Manufacturing Co., Inc. reserves the right to make improvements in design or changes in specications at any time

without incurring any obligation to install them on units previously sold.

Except as expressly authorized, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or

stored in any storage medium, for any purpose without the express prior written consent of Art’s-Way Manufacturing Co., Inc.

ART’S-WAY MANUFACTURING CO., INC.

HWY 9 WEST - PO Box 288

Armstrong, IA. 50514 U.S.A

ART’S-WAY MANUFACTURING CO., INC.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Art's-Way Manufacturing Landwirtschaftliche Geräte Handbücher

Art's-Way Manufacturing

Art's-Way Manufacturing Forage Box Bedienungsanleitung

Art's-Way Manufacturing

Art's-Way Manufacturing 6812B Bedienungsanleitung

Art's-Way Manufacturing

Art's-Way Manufacturing 6812A Bedienungsanleitung

Art's-Way Manufacturing

Art's-Way Manufacturing 660800 Bedienungsanleitung

Art's-Way Manufacturing

Art's-Way Manufacturing 7165 Bedienungsanleitung

Art's-Way Manufacturing

Art's-Way Manufacturing 6812D Bedienungsanleitung

Art's-Way Manufacturing

Art's-Way Manufacturing 166 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung