Artisan GSP-810 Bedienungsanleitung

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

GSP-810 Spectrum Analyzer

Spectrum Analyzer

GSP-810

Operation Manual

GW Part No: 82SP-81000MB

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

Table of Contents

1.0 GENERAL DESCRIPTION AND FEATURES........................................................................................ 3

2.0 USAGE PRECAUTIONS AND RECOMMENDATIONS ........................................................................ 3

3.0 PANEL DESCRIPTIONS ........................................................................................................................ 7

4.0 SETUP AND USE ................................................................................................................................. 11

5.0 QUICK USE INDEX .............................................................................................................................. 27

6.0 SPECIFICATIONS ................................................................................................................................ 28

APPENDIX 1 - REMOTE OPERATION...................................................................................................... 31

Due to continuous improvements in the GSP-810 Spectrum Analyzer, information

contained in this Manual is subject to change without notice.

Contact GW, for revisions and corrections.

Goodwill Instrument Co., LTD.

NO. 95-11, PAO-CHUNG ROAD, HSIN-HIEN CITY,

TAIPEI HSIEN, TAIWAN

Telephone – 886-2-29179188

Fax – 886-2-2918-3190

E-mail - [email protected]

URL -http://www.goodwill.com.tw

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

EC Declaration of Conformity

GOOD WILLINSTRUMENT CO., LTD.

(1) No. 95-11, Pao-Chung Rd., Hsin-Tien City, Taipei Hsien, Taiwan

(2) Plot 522, Lorong Perusahaan Baru 3, Prai Industrial Estate, 13600

Prai, Penang, Malaysia

declare, that the below mentioned product

GSP-810

are herewith confirmed to comply with the requirements set out in the

Council Directive on the Approximation of the Law of Member States

relating to Electromagnetic Compatibility (89/366/EEC, 92/31/EEC,

93/68/EEC) and Low Voltage Equipment Directive (73/23/EEC).

For the evaluation regarding the Electromagnetic Compatibility and Low

Voltage Equipment Directive, the following standards were applied:

EN 61326-1: Electrical equipment for measurement, control and laboratory use ––

EMC requirements (1997+A1: 1998)

Conducted and Radiated Emissions

EN 55011 class A: 1991 Electrostatic Discharge

EN 61000-4-2: 1995

Current Harmonic

EN 61000-3-2: 1995 Radiated Immunity

EN 61000-4-3: 1996

Voltage Fluctuation

EN 61000-3-3: 1995 Electrical Fast Transients

EN 61000-4-4: 1995

Surge Immunity

EN 61000-4-5: 1995

Conducted Susceptibility

EN 61000-4-6: 1996

Power Frequency Magnetic field

EN 61000-4-8: 1993

Voltage Dips/ Interrupts

EN 61000-4-11: 1994

Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC

Safety Requirements

IEC 61010-1: 1990+A1: 1992+A2: 1995

EN 61010: 1990+A1: 1992+A2: 1995

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

1.0 General Description and Features

The GSP-810 is designed for minimal set-up and adjustment. The user interface

allows fast and accurate measurements. The fully synthesized design of the GSP-

810 permits stable operation down to 2 kHz / division.

2.0 Usage Precautions and Recommendations

The following precautions are recommended to insure your safety and to provide the

best condition of the GSP-810.

Safety Terms and Symbols

These terms may appear in this manual or on the product:

WARNING: Warning statements identify condition or practices that could

result in injury or loss of life.

CAUTION: Caution statements identify conditions or practices that could result

in damage to this product or other property.

The following symbols may appear in this manual or on the product:

DANGER ATTENTION Protective Earth (ground)

High Voltage refer to Manual Conductor Terminal

Terminal

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

FOR UNITED KINGDOM ONLY

NOTE: This lead / appliance must only be wired by competent persons

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in this lead are coloured in accordance with the following code:

Green/ Yellow: Earth

Blue: Neutral

Brown: Live (Phase)

As the colours of the wires in main leads may not correspond with the colours

marking identified in your plug/appliance, proceed as follows:

The wire which is coloured Green & Yellow must be connected to the Earth

terminal marked with the letter E or by the earth symbol or coloured Green or

Green & Yellow.

The wire which is coloured Blue must be connected to the terminal which is

marked with the letter N or coloured Blue or Black.

The wire which is coloured Brown must be connected to the terminal marked with

the letter L or P or coloured Brown or Red.

If in doubt, consult the instructions provided with the equipment or contact the

supplier.

This cable/appliance should be protected by a suitably rated and approved HBC

mains fuse: refer to the rating information on the equipment and/or user

instructions for details. As a guide, cable of 0.75mm2should be protected by a 3A

or 5A fuse. Larger conductors would normally require 13A types, depending on the

connection method used.

Any moulded mains connector that requires removal /replacement must be

destroyed by removal of any fuse & fuse carrier and disposed of immediately, as a

plug with bared wires is hazardous if a engaged in live socket. Any re-wiring must

be carried out in accordance with the information detailed on this lable.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

Use and Wear

CAUTION

•Do not exceed +30 dBm into the RF INPUT or +30 dBm reverse power into the

TG OUTPUT.

•Do not place any heavy object on the instrument.

•Avoid severe impacts or rough handling that could damage the GSP-810.

•Use electrostatic discharge precautions while handling and making

connections to the GSP-810.

•Do not place wires into the connectors of the GSP-810, only mating connectors

and adapters.

•Do not block or obstruct cooling fan vent opening on side panels or on the rear

panel of unit.

1) Disassembly of the Instrument

•Do not disassemble the instrument; refer the instrument to a factory approved

service facility only.

2) AC Power Input

CAUTION

•AC input should be within the range of selected line voltage +/- 10%.

•Insure the correct fuse is installed prior to applying voltage for the first time -

90 V ~ 132 VAC input : T 1A / 250V

198 ~ 250 VAC input : T0.5A / 250V

•Check the line voltage setting on the rear panel. If the line voltage does not

match input voltage, change as follows:

a) Remove AC Power Cord;

b) Open cover of AC socket with flat blade screwdriver;

c) Remove selector Cam Drum and rotate to the correct voltage selection

d) Replace Cam Drum.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

3) Grounding

WARNING

•To avoid electrical shock, the power cord protective grounding conductor must

be connected to earth ground.

4) Fuse Replacement

WARNING

•For continued fire protection, replace the fuse with the specified type and rating

only.

•Disconnect power cord before replacing fuse.

•If the fuse is blown, there is something wrong with the instrument. Repair the

cause of fault before replacing fuse.

5) Cleaning

•Disconnect AC Power Cord from the instrument before cleaning.

•Use a soft cloth dampened in a solution of mild detergent and water. Do not

spray any liquid into the unit.

•Do not use chemicals or cleaners containing benzene, toluene, xylene,

acetone or other harsh chemicals.

6) Operating Environment

•The following conditions are recommended for optimum use of the instrument -

Indoor Use Altitude < 2000 m Temperature 18° to 28° C Relative Humidity < 90%

Dust Free No direct sunlight No strong magnetic fields

•Installation Category: II

•Pollution degree: 2

7) Storage Environment

•The following conditions are recommended for optimum storage of the

instrument -

Indoor Temperature 0° to 40° C Relative Humidity < 85%

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

3.0 Panel Descriptions

Front Panel

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

GSP-810 Spectrum Analyzer

Item Description

1 Cathode Ray Tube (CRT) Display, 8 x 10 graticule, 5 inch

2 Liquid Crystal Display (LCD), 4 line x 20 character

3 Keypad, field selection and data entry

4 Spinner, field selection and data change

5 RF Input, Coaxial, Type N Female

6 Tracking Generator Output, Coaxial, Type N Female (optional)

7 Switch, Power ON / OFF

8 Adjustment, CRT Trace Rotation, potentiometer

9 Control Knob, Volume (optional demod receiver)

10 Phone Jack, head set output, (optional demod receiver)

11 Control Knob, CRT Focus

12 Adjustment, CRT Y-axis position, potentiometer

13 Control Knob, CRT Intensity

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Inhaltsverzeichnis

Andere artisan Messgerät Handbücher

artisan

artisan GSP-810PM Bedienungsanleitung

artisan

artisan GSP-827 Bedienungsanleitung

artisan

artisan V490 Bedienungsanleitung

artisan

artisan LiQuilaz-S Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

artisan GSP-810 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken