Asante FriendlyNET FS4005P Bedienungsanleitung

Asanté FriendlyNET FS4005P Installation Guide

Page 1

Product Introduction

Congratulations on your purchase of the Asanté FriendlyNET FS4005P.These switches were

designed to give you the ultimate in performance, ﬂexibility, ease-of-use, and reliability.

Your Asanté FriendlyNET FS4005P can increase performance on your network by bringing full Ether-

net bandwidth to individual workgroups, or straight to the desktop, instead of requiring all stations to

share the bandwidth of a single network.The switch’s 100Mbps Fast Ethernet capability can eliminate

bottlenecks in connections to servers, or can link 10Mbps workgroups to a 100Mbps Fast Ethernet net-

work backbone.

For straight-through 10Base-T/100Base-TX connection to servers and workstations, the switch sup-

ports full-duplex connection, effectively doubling the total throughput on individual links.The switch’s

store-and-forward switching architecture forwards packets to their destination with a minimum of delay.

The switches can be placed on a tabletop or wall-mounted, and provide the ideal solution for your

small, medium, or large Ethernet/Fast Ethernet network. It is designed to comply fully with the IEEE

802.3 Ethernet and 802.3u Fast Ethernet standards.

Asanté FriendlyNET FS4005P

5-port Dual-speed Fast Ethernet Switch

User’s Guide

FS4005P.fm Page 1 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page

Package Contents

Your switch package should contain the following:

• The user manual

• One 10/100Mbps switch

• One AC power cable

• Four self-adhesive standoffs

If any of these items are missing, contact your dealer immediately

Installation

The Asanté FriendlyNET FS4005P switch is easy to install and requires no special training.You

should, however, read the following instructions carefully before proceeding to install your switch.The

diagram below shows the layout of the front and rear panels.

Front & Rear Panel of the Asanté FriendlyNET FS4005P

FriendlyNET

5-port Dual-speed Ethernet Switch

PWR

Collision/FullDuplex

Link/Activity

FS4005P

12345 Uplink

5VDC

FS4005P.fm Page 2 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page 3

The Asanté FriendlyNET FS4005P is designed for easy “plug and play” installation.Before you con-

nect your switch to other devices, there are several issues you should keep in mind:

∆

When connecting the switch to a workstation using unshielded twisted pair

cable, you must make sure that the cable length is not greater than 100 meters.

10Base-T twisted pair Ethernet cabling should be category 3 or better, and

100Base-TX twisted pair Fast Ethernet cabling should use tested category 5

cabling.

∆

Network cable segments can be connected to, or disconnected from the

switch while the power is on.Plugging in or removing network cables while your

switch is operating will not interrupt the operation of the switch.

∆

When placing your switch, you need to avoid dusty locations and electromag-

netically noisy areas.

Desktop Placement

You can place the switch on a table.In this case, use the four self-adhesive feet, which are provided

with the Asanté FriendlyNET FS4005P for cushioning purposes. Stick them on the four corners of the

bottom surface of the switch, as shown in diagram below to cushion it against vibration.

FriendlyNET

5-port Dual-speed Ethernet Switch

PWR

Collision/FullDuplex

Link/Activity

FS4005P

12345 Uplink

FS4005P.fm Page 3 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page

Connecting to Servers andWorkstations

Use the following procedure to connect a 10Base-T or 100Base-TX Ethernet server or worksta-

tion to the switch.

1. Make sure that the length of the straight-through cable between the switch and the station does

not exceed 100 meters, including all patch cables and cross-connect wires.

2. Connect one end of the cable to the RJ-45 connector on the switch, and the other end to the sta-

tion.

5 4 3 2 1

10Mbps

workstation 100Mbps

workstation 10Mbps

workstation 100Mbps

workstation

Connection cable may be up to 100 meters long

FS4005P.fm Page 4 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page 5

Interconnecting to switches

To connect a switch or hub, note the following:

1. Use a straight-through cable to connect uplink port or use a crossover cable to connect to any

port except uplink port. (Do not connect both uplink ports together, and do not use a crossover

cable to connect with the uplink port).

LED Indicators

Front Panel LED Indicators

FriendlyNET

5-port Dual-speed Ethernet Switch

PWR

Collision/FullDuplex

Link/Activity

FS4005P

12345 Uplink

FriendlyNET

8-port Dual-speed Ethernet Switch

PWR

5678

Collision/FullDuplex

Link/Activity

FS4008P

12345678 Uplink

Uplink Connection

FS4005P.fm Page 5 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page

Table 1: Power LED

Color Status

Green The switch is powered on and ready for use

OFF The switch is powered off or the LED has failure.

Please check the following issues:

• Make sure the power adapter is properly inserted into

the power connection on the switch.

• Determine whether or not the power adapter is func-

tional by plugging another device into the receptacle

Table 2: 100M Link/Activity

Color Status

Green The port is connected to a link partner

and the result of auto-negotiation is

100Mbps with full duplex

Flashing green The port is operating in full duplex and

there is a data being received.

FS4005P.fm Page 6 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page 7

Amber The port is connected to a link partner

and the result of the auto-negotiation is

100Mbps with half-duplex

Flashing amber The port is operating in half duplex and

there is data being received.

OFF No 100Mbps IDLE symbol signal is

being received.

Table 3: 10M Link/Activity

Color Status

Green The port is connected to a link partner

and the result of auto-negotiation is

10Mbps with full duplex

Flashing green The port is operating in Full duplex and

there is a data being received.

Amber The port is connected to a link partner

and the result of the auto negotiation is

10Mbps with half-duplex

Table 2: 100M Link/Activity

FS4005P.fm Page 7 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page

Flashing amber The port is operating in half duplex and

there is data being received.

OFF No 10Mbps link pulse signal is being

received.

Table 3: 10M Link/Activity

FS4005P.fm Page 8 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page 9

ContactingTechnical Support

To contact Asanté Technical Support:

Telephone (800) 622-7464

Fax (801) 566-3787

E-mail suppor[email protected]

World Wide Web Site http://www.asante.com

Technical Support Hours

6:00 a.m. to 5:00 p.m. Paciﬁc Standard Time USA, Monday - Friday.

FS4005P.fm Page 9 Tuesday, March 16, 1999 5:33 PM

Asanté FriendlyNET FS4005P Installation Guide

Page

ASANTÉ TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA 95131

PHONE: 800.622.7464 • FAX: 801.566.3787 • e-mail address: [email protected] •

World Wide Web site: http://www.asante.com

All brand names and products are trademarks or registered trademarks of their respective holders.

March 1999 Rev A.

FS4005P.fm Page 10 Tuesday, March 16, 1999 5:33 PM

Inhaltsverzeichnis

Andere Asante Netzwerk-Router Handbücher

Asante

Asante FriendlyNET GX5-424W Bedienungsanleitung

Asante

Asante FS4002E/FS4004E Bedienungsanleitung

Asante

Asante IntraCore IC3624PWR Bedienungsanleitung

Asante

Asante FriendlyNET FR1104-G Bedienungsanleitung

Asante

Asante FriendlyNET FR3000 Series Bedienungsanleitung

Asante

Asante FriendlyNet FS4004DS Bedienungsanleitung

Asante

Asante Asante FriendlyNET FS4124R Bedienungsanleitung

Asante

Asante IntraCore 39240/480 User's Bedienungsanleitung

Asante

Asante FriendlyNET GX5-424W Bedienungsanleitung

Asante

Asante FriendlyNet FS3208 Bedienungsanleitung

Asante

Asante FriendlyNET VR2004 Series Bedienungsanleitung

Asante

Asante IntraSwitch 5308FL Bedienungsanleitung

Asante

Asante FriendlyNET FS4116R Bedienungsanleitung

Asante

Asante Asante FriendlyNET FS4116R Bedienungsanleitung

Asante

Asante IntraSwitch 5324MT Bedienungsanleitung

Asante

Asante IntraCore 40240 Bedienungsanleitung

Asante

Asante FriendlyNET FS4124R Bedienungsanleitung

Asante

Asante FriendlyNET FS4016P Bedienungsanleitung

Asante

Asante IntraStack 6014DSB Handbuch

Asante

Asante FriendlyNET FR1000 Bedienungsanleitung

Asante

Asante IntraCore 3624/48 User's Bedienungsanleitung

Asante

Asante IntraCore 36000 Series Bedienungsanleitung

Asante

Asante IntraCore 6524 Bedienungsanleitung

Asante

Asante ReadySwitch 5104 Handbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung