Ashcroft 2032 Bedienungsanleitung

I&M008-10162-10/08

Digital

Sanitary

Gauge

Operating

Instructions

Congratulations on your purchase of the Ashcroft

digital sanitary gauge. This feature-packed gauge

offers a menu-driven display for easy customization.

User selectable features include 12 units of measure-

ment, password protected calibration and disable

functions, adjustable bar graph and update rate. A

five digit display for maximum resolution is standard.

Optional 4-20mA output, switching and line- power

add to the versatility of the gauge. With the range

printed on the keypad, Ashcroft digital gauges meet

ASME B40.7 specification. See a complete listing of

product features and specifications on pages 16.

TAB E OF CONTENTS

Quick Reference ............................................4-5

Keypad Functions ..........................................6-8

• ON/O KEY

• ZERO/CLEAR KEY

• MIN/MAX KEY (down arrow key)

• MENU KEY

• BACKLITE KEY (up arrow key)

• ENTER KEY

MENU Functions (MENU Mode) ................................8-15

• Engineering Units

• CON IG Mode

• Set Password

• Recalibration of Gauge

• Zero Key Adjustment

• Disabling Menu Options

• Bar Graph Options

• Auto Off Options

• Update Options for Displayed Pressure

• Dampening Options

• Backlite Options (Backlite Optional)

• Set Switch(es) Option(s) (Switches Optional)

Specifications ................................................16

Ranges ........................................................16

Display Messages ..........................................17

Wiring Diagrams ........................................18-22

Gauge Installation & Maintenance........................24

• Mounting

• Battery Replacement & Installation

Bar graph

% of full scale

Flashing display when unit

pressured below zero

Press to indicate minimum

or maximum pressure

gauge has measured

Press again to return to

pressure units

Press to read menu

316LSS

UNITS (Pressure)

ENGLISH

INHG

PSI*

INH2O

@ 4°C, 20°C, 60°F

FTW

FTSW

ETRIC

BAR

KPA

C H2O

KG/C 2

UPDATE RATE

(Pressure measurement

per second)

10x (100 MS)*

5x (200 S)

2x (500 S)

1x (1 Sec)

BACKLITE

(Off options)

Never

2 SEC

5 SEC*

15 IN

30 IN

.88˝ high digital display (41⁄2˝ case)

.60 high digital display(3˝ case)

QUICK RE

12-20RA Surface finish

While in unit of measurement mode (eg: psi),

press the ZERO CLEAR button to rezero the

gauge. This feature functions when displayed

pressure is within ±5% or 10% of zero value

This bar graph indicates battery level;

the more segments, the closer the

battery is to full charge (only dis-

played on units with battery

Flashing display when unit

pressurized beyond full-scale

Press to turn backlite on or off

(backlite optional)

Range on keypad;

complies with AS E B40.7

Press to turn unit on or off

AUTO OFF

(Turns unit off after

option selected)

Never*

2 minutes

5 minutes

15 minutes

30 minutes

CALIBRATE

Zero and span

adjustments,

password

protected

DISABLE

Allows for

“lockout” of

ENU

options

DA PENING

(Takes pressure reading

and averages

process pressure

None*

Avg 2

Avg 4

Avg 6

Avg 8

*Indicates Default

FERENCE

Turns the gauge on and off. When pressing the

ON/O key while in the off position, gauge start-

up display first indicates the software version

followed by the model number and gauge pres-

sure range. The gauge will then display indicated

pressure and be ready for use.

Press this key for one second prior to gauge

usage to rezero any initial zero shift. If zero shift

is greater than programmed zero allowance, the

gauge will display O SET (blinking) for 1 sec-

ond, then return to the measure mode. To clear

minimum and maximum values, press

ZERO/CLR button (when min/max values are

indicated). Gauge will auto advance once zeroed.

KEYPAD FUNCTIONS

ON/OFF

ZERO

C R

MAX/MIN The Max/Min key allows review of minimum and

maximum pressure values since unit start-up or

last push of the clear key. Press key to:

1) Indicate maximum pressure.

2) Indicate minimum pressure.

3) Exit MAX/MIN mode and return the unit to

pressure measurement mode. To clear mini-

mum and maximum values press ZERO/CLR

key (must be in MAX/MIN mode).

The (down arrow key) is used in the MENU

mode, see following MENU key section.

This key allows for customization of the gauge.

Pressing the MENU key allows cycling through

the main MENU items; UNITS, CON IG, GRAPH,

O , UPDAT & DAMP. Any item changed in the

Menu become the new default setting(s).

Revised settings are saved in the event of power

loss.

The (up arrow key) or (down arrow key)

on the keypad allows for scrolling through the

MENU options to increase or decrease numeric

values as required. If in the menu mode, gauge

will automatically advance to measure mode

once selected MENU item has been set.

This key manually turns the backlite on or off.

five options are available. They include NEVER,

10 sec, 30, sec, 1 min, 5 min*. With the NEVER

option, the gauge BACKLITE will remain lit

whenever the gauge is in the ON mode or until

the BACKLITE button is pushed again. Options,

10 sec, 30 sec, 1 min, 5 min*. allow the BACK-

LITE to automatically turn-off after a selected

period of time.

To use the BACK ITE option:

Step 1: Press the MENU key.

Step 2: Press the (up arrow key) or (down

arrow key) until the word LITE appears.

Step 3: Press ENTER.

Step 4: Press the (up arrow key) or (down

arrow key) to select the BACKLITE option.

Step 5: Press the ENTER key to finalize your

choice of LITE options.

KEYPAD FUNCTIONS

Key for g uge

with B cklite

Key for g uge

without B cklite

displ yed with

(up rrow

icon only)

KEYPAD FUNCTIONS

MENU OPTIONS

UNITS: 12 units of measurement are available: psi, mmHG,

inH2O with three temperature options: 20°C, 60° , 4°C*,

mBar, inHg, ftH2O, mPa, kPa, kg/cm2and bar.

Step 1: Press the MENU key until the word UNITS appears.

Step 2: Press Enter.

Step 3: Press the (up arrow key) or (down arrow

key) to select the required unit of measure.

Step 4: Press ENTER to finalize the UNIT selection.

Note: For inH20 r nge with three temper ture options,

press the



(up rrow key) nd



(down rrow key) to

select the desired temper ture, then press ENTER to fin l-

ize the UNIT selection.

CONFIG: This option allows access to additional Menu

options. Options include:

• ENTPW or enter password (this ppe rs s sub-menu

in the CONFIG mode if user p ssword h s been set).

• RECA (allows for zero, span and mid-scale calibra-

tion of the gauge).

• 0bUTN or zero key (allows for adjustment of % of

range that can be zeroed),

• dISAb, allows for disabling MENU options.

• SETPW: This feature allows for a user defined numer-

ic password. If a user password is not set, all features

in the CON IG mode will be accessible without a

password. If a user password is set, all items in the

CON IG menu options are accessible with or without

a user password. If a user password is programmed,

it will be required to access the CON IG menu options.

*Indicates default.

ENTER

This key allows for selecting gauge features in the

menu finalizing selection. Use of the enter key is

described throughout operating instructions.

MENU FUNCTIONS

How to Use Your Menu Functions

To set a user password (SETPW):

Step 1: Press the Menu key on the keypad

Step 2: Press the (up arrow key) or (down arrow

key) until the word CON IG appears.

Step 3: Press Enter. The word SETPW appears on the

gauge display

Step 4: Press Enter. A five digit numeric password is now

required.

Step 5: Press the (up arrow key) or (down arrow

key) on the keypad to select the first digit of the password.

Step 6: Press ENTER.

Step 7: Repeat until the five-digit password is shown on

the gauge display.

Step 8: Press ENTER.

Note: to er se p ssword t ny time while in the SETPW

(set p ssword) mode, press the ZERO/CLEAR key. The

user will be prompted to reprogr m the p ssword once the

five-digit p ssword is entered. The g uge will displ y SAVE.

Step 9: Press Enter to save the password setting.

ENTPW: Once a user password has been established and

entry into the CON IG mode is required, the user will be

prompted to ENTPW or enter password.

Follow setup steps 4-8 above.

RECA : or recalibrate allows for zero, mid-scale, full-scale

and factory default calibration of the gauge. The RECAL

feature also allows for recalibration of gauges with

4-20mA output.

*Indicates default.

KEYPAD FUNCTIONS

To use RECA option:

Step 1: Press the Menu key on the keypad

Step 2: Press the (up arrow key) or (down arrow

key) on the keypad until the word CON IG appears.

Step 3: Press Enter.

Step 4: Enter user password if it has been programmed.

Step 5: Press (up arrow key) or (down arrow key)

until the word RECAL appears.

Step 6: Press Enter.

Step 7: The gauge will now flash between INPUT and unit

of measure on the lower line and .00 on the top line. Apply

zero pressure to the gauge.

Step 8: Press Enter. Zero pressure is now set.

Step 9: The gauge will display full-scale pressure. Apply

full-scale pressure to the gauge.

Step 10: Press Enter. ull-scale pressure is now set.

Step 11: The gauge will now display mid-scale pressure.

Apply mid-scale pressure to the gauge.

Step 12: Press Enter. Mid-scale pressure is now set.

(Note: For compound r nges this rec libr tion is zero,

full-sc le, mid-sc le nd full-v c.)

FOR FACTORY CA IBRATED SETINGS:

Step 13: To reinstate factory calibrated settings for zero,

full-scale and mid-scale press the (down arrow key)

Menu key until the word ACT appears.

Step 14: Press Enter. actory calibration settings are now

reinstated.

Step 15: After zero, full-scale and/or mid-scale or factory

default calibration have been set, the word SAVE appears

on the gauge display.

Step 16: Press Enter to finalize calibration.

MENU FUNCTIONS

*Indicates default.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ashcroft Messgerät Handbücher

Ashcroft

Ashcroft N5500 Bedienungsanleitung

Ashcroft

Ashcroft 50 HPS Bedienungsanleitung

Ashcroft

Ashcroft 1132 Bedienungsanleitung

Ashcroft

Ashcroft DG25 Bedienungsanleitung

Ashcroft

Ashcroft a4a Handbuch

Ashcroft

Ashcroft 2074 Bedienungsanleitung

Ashcroft

Ashcroft A5400 Bedienungsanleitung

Ashcroft

Ashcroft N5500 Bedienungsanleitung

Ashcroft

Ashcroft F5509 Bedienungsanleitung

Ashcroft

Ashcroft F5504 Bedienungsanleitung

Ashcroft

Ashcroft F5503 Bedienungsanleitung

Ashcroft

Ashcroft TC Bedienungsanleitung

Ashcroft

Ashcroft Digital Test Gauge Bedienungsanleitung

Ashcroft

Ashcroft P6500 Bedienungsanleitung

Ashcroft

Ashcroft 2074 Bedienungsanleitung

Ashcroft

Ashcroft T5500 Bedienungsanleitung

Ashcroft

Ashcroft 8008 Bedienungsanleitung

Ashcroft

Ashcroft t5500e Bedienungsanleitung

Ashcroft

Ashcroft T5500 Technische Daten

Ashcroft

Ashcroft 1131 Bedienungsanleitung

Ashcroft

Ashcroft T5500 Gebrauchsanweisung

Ashcroft

Ashcroft F5509 Bedienungsanleitung

Ashcroft

Ashcroft A Bedienungsanleitung

Ashcroft

Ashcroft F5503 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung