Assa Abloy Corbin Russwin BLSS ML2000 Series Bedienungsanleitung

FM521 08/19

Installation Instructions

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

WARNING

This product can expose you to lead

which is known to the state of California

to cause cancer and birth defects or other

reproductive harm. For more information

go to www.P65warnings.ca.gov.

ML2000 Series

Mortise Lock

Used with VN Escutcheon Trim

and V Series Indicators

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

TOC Table of Contents

1 Tools Required ..................................................................3

2 Indicator Variants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

3 Mortise Lock Handing Instructions...............................................4

4 Rehanding Indicator (if necessary) ...............................................5

5 Installation Instructions .........................................................6

a Prepare Door....................................................................6

b MUSÉO®LEVERS ONLY: Attach Levers to Escutcheons ............................6

c Install Lock and Outside Trim ....................................................6

d Install Cylinder ..................................................................7

e Install Inside Trim................................................................7

f STANDARD LEVERS ONLY: Attach Levers..........................................8

g Install Outside Front .............................................................9

h Perform Functional Check .......................................................9

6 Indicator Parts................................................................. 10

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

1 Tools Required

• Phillips screwdriver (#1, #2 and #3 sizes)

• Flat-blade screwdriver

• 1/8" Allen wrench - standard trim

• 3/32” - Muséo®

• 7/64” - ML20900/ML20600 - NAC

• 3/8" dia. drill bit

2 Indicator Variants

Depending on function and option ordered,

indicators are provided in the following variations.

These instructions detail how to install with

cylinder, however other variations follow similar

instructions. (Figure1)

Contact factory with any questions.

Cylinder – For installation on

inside or outside of door.

Coin Turn – For installation on

outside of door.

Thumbturn - For installation

on inside of door.

No input/blank - For

installation on inside of door.

Figure1

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

3 Mortise Lock Handing Instructions

1. Move red locking screw to side of lock body

being locked.

2. Push in latch. Depress catch plate with

screwdriver. (Figure2)

3. Pull latch out of lock body and turn latch

over. (Figure3)

4. Push in latch while holding screwdriver

behind latch tail. (Figure5)

Figure4

Figure5

MAKE SURE CATCH PLATE IS EVEN

WITH TOP SURFACE

GOOD BAD

WARNING: LOCK-IN CAN

OCCUR IF LATCH IS NOT

PROPERLY INSTALLED

Note:

Ensure that latch is pushed in until catch plate is

no longer depressed. (Figure4)

5. Rotate lock front to match bevel of door as

shown. (Figure6)

Catch Plate

Figure2

LOCK HANDING IS

CRITICAL TO ENSURE LOCK

FUNCTIONS PROPERLY

RED Locking Screw

Figure3

Figure6

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

4 Rehanding Indicator (if necessary)

1. Verify hand and bevel of door. (Figure7)

Left Hand

Hinges Left

Open Inward

Right Hand

Hinges Right

Open Inward

LHRB

Left Hand

Reverse Bevel

Hinges Left

Open Outward

RHRB

Right Hand

Reverse Bevel

Hinges Right

Open Outward

Figure7

Note:

Stand on outside of locked door when determining door hand.

2. Remove indicator back plate by pulling out from top slot.

3. Remove spindle cam from assembly.

4. Position the spindle cam in the correct direction for door hand. (Figure8)

5. Slide spindle cam post into the correct slot of the display slide (Figure9).

6. Press back plate back into original position.

Note:

Verify handing on both outside and inside

indicators.

Door Hand:

RH/RHRB

Door Hand:

LH/LHRB

Spindle Cam Position

Inside Indicator

Outside Indicator

Inside Indicator

Figure8

Spindle Cam

Back

Plate

Plate slot

for removal

Display Slide

Slot

Figure9

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

5 Installation Instructions

a Prepare Door

Prepare door for function holes, size, and location according to FM500 door marker template, if not

already prepped.

b MUSÉO®LEVERS ONLY: Attach Levers to Escutcheons

1. Thread lever onto adapter.

2. Insert spindle into adapter and fully tighten onto lever. Loosen smallest amount that allows spindle to

engage lever.

3. Verify correct spindle orientation with the lever held horizontally. (Figure10)

Lever

GOODBAD

NOTE:

Use correct spindle orientation.

(Figure10)

Lever

Adapter

Spindle

Figure10

c Install Lock and Outside Trim

1. Verify strike location according to template.

Clean out door pocket and door edge of debris.

2. Make sure handing of the lock matches handing of

door. Slide lock into the door and hold.

3. Slide outside lever and escutcheon assembly through

door; lock body and hold. (Figure11)

4. Verify indicator is in unlocked position.

NOTE:

• Keep door open while installing lock.

• Make sure lock is unlocked.

Outside of door

Inside of door

Lock

Outside

Escutcheon

Assembly

RH door

shown

Figure11

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

5 Installation Instructions (cont.)

d Install Cylinder

1. Thread cylinder into lock until flush with surface.

2. Install the cylinder clamp screw (#2 Phillips screwdriver).

3. Check operation, and adjust cylinder if necessary.

4. Secure lock in door with two (2) Combination screws

Do NOT tighten completely at this time. (Figure12)

NOTE:

• CORBIN RUSSWIN logo must be horizontal and on top

portion of cylinder.

• Designed for 1-1/8" cylinders. For longer cylinders consult

factory.

e Install Inside Trim

1. Install inside escutcheon assembly Using two (2) through-bolt screws. (Figure13)

NOTE:

Engage both spindle and spindle cam with lock body.

2. Verify indicator is in unlocked position.

Note:

• Screw heads should be visible on inside

escutcheon.

• If a turn-piece is required, it should be oriented

vertically.

Inside of door

Outside of door

Cylinder

RHdoor

shown

Cylinder Clamp

Screw

Lock Screw

Figure12

Escutcheon

Assembly

Spindle

SpindleCam

#8-32 x 2-1/4"

Screws

Figure13

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

5 Installation Instructions (cont.)

f STANDARD LEVERS ONLY: Attach Levers

1. Install outside lever or knob by inserting

adjustment bolt on opposite side of door.

Tighten bolt finger-tight and loosen a few turns.

2. Install inside lever or knob by inserting dowel

screw. (Figure14)

Figure15

Lever

GOODBAD

NOTE:

Use correct spindle orientation.

(Figure15)

NOTE:

Make sure adjustment bolt hole is aligned with lever or knob hole. (Figure16)

Figure16

Misaligned.

Adjustment bolt

needs to be threaded

in farther.

Misaligned.

Adjustment bolt needs

to be unthreaded.

Adjustment bolt fully

aligned with lever

hole and ready to be

secured with set screw.

Adjustment Bolt

AdjustmentBolt Adjustment Bolt

Figure14

Bushing

OutsideLevel

plus Spindle

Bushing

Inside

Spindle

Adjustment

Bolt

Dowel

Screw

Inside

Lever

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

5 Installation Instructions (cont.)

g Install Outside Front

1. Tighten the two (2) lock screws completely.

2. Attach the outside front with two (2) flat head screws

#8-32 x 1/4". (Figure17)

h Perform Functional Check

1. Insert key into cylinder and rotate.

• There should be no friction against lock case or any other obstructions.

2. Check that key retracts latch.

• Key should rotate freely.

3. Throw deadbolt (if present).

• Check that key retracts both deadbolt and latch.

4. Test inside lever.

• Ensure it retracts latch and deadbolt (if installed).

5. Verify indicator displays correct status when locked and unlocked. See step 4 if it does not.

#8-32 x 2-1/4"

Screws

Lock

Screw

Outside

Front

Lock

Screw

Figure17

ML2000 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

FM521 08/19

in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For installation assistance contact Corbin Russwin

1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com

6 Indicator Parts

Figure18

Figure18 Description Part Number Required

1 VN Indicator Escutcheon Consult Factory 1

2 Indicator Window 856F049 1

Indicator Display Assembly – Green ‘Unlocked’ / Red ‘Locked’ 858F241

Indicator Display Assembly – Green ‘ Vacant’ / Red ‘Occupied’ 858F251

Indicator Display Assembly – Green Unlocked Icon / Red Locked Icon 858F261

Indicator Display Assembly – White ‘Unlocked’ / Red ‘Locked’ 858F271

Indicator Display Assembly – White ‘ Vacant’ / Red ‘Occupied’ 858F281

Indicator Display Assembly – White Unlocked Icon / Red Locked Icon 858F291

4A Indicator Spindle Cam – Thumb Turn 855F619 1

4B Indicator Spindle Cam – Cylinder / No Input/Bank 855F707 1

4C Indicator Spindle Cam – Coin Turn 855F747 1

5 Indicator Escutcheon Back Plate 855F638 1

6 VN Escutcheon Screw Pack (Not shown) 858F517 x finish 1

7 Door Marker Template (Not shown) FM500 1

NOTE:

Reference ML2000 parts manual for all lock body parts.

Andere Handbücher für Corbin Russwin BLSS ML2000 Series

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Yale Essential Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDLL/BLK Fehlerbehebungshandbuch

Assa Abloy

Assa Abloy AUE100 Aperio Bedienungsanleitung

Assa Abloy

Assa Abloy ESA500 Installationshandbuch

Assa Abloy

Assa Abloy effeff 843ZY Bedienungsanleitung

Assa Abloy

Assa Abloy Yale nexTouch NTB610 Technische Daten

Assa Abloy

Assa Abloy Yale Delayed Egress Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Bedienungsanleitung

Assa Abloy

Assa Abloy DC6210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy EMTEK LISCIO Fehlerbehebungshandbuch

Assa Abloy

Assa Abloy 8654 Bedienungsanleitung

Assa Abloy

Assa Abloy LOCKWOOD 3782 Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff 309 Bedienungsanleitung

Assa Abloy

Assa Abloy ANYKEY Bedienungsanleitung

Assa Abloy

Assa Abloy shine Bedienungsanleitung

Assa Abloy

Assa Abloy 179A S4 Benutzerhandbuch

Assa Abloy

Assa Abloy CL33700 TCPWI1 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living YRD210-ZW Technische Daten

Assa Abloy

Assa Abloy 8788 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Signature Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale real Living Assure Lock SL Technische Daten

Assa Abloy

Assa Abloy Yale Essential YDME 70 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Doorman Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

We.lock

We.lock SECBNEBL51 Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

JAKO

JAKO JKBTNX4 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung