Assa Abloy Yale Essential Series Bedienungsanleitung

Essential Series YDME - 90

Installation

Operation Note

Enrolling Fingerprint User

Deleting Fingerprint User

Enrolling Code User

Deleting Code User

Enrolling Card User

Deleting Card User

Unlocking

Change Batteries

Reset

Extension Functions

Solutions for Common Error

Template

CONTENTS

YDME - 90 Essential Series

Important Tips

1. The factory default master code is . Please change the master code on the

initial use. After the master code is changed, all the exist users are deleted automatically.

2. Carefully keep the override key, take one override key with you and put the spare key

in your ofﬁce or car in case of power failure of door lock.

3. Sound deﬁnitions: one short beep indicates a sound of key pressing; one long beep

indicates a successful operation; two short beeps(three times) indicates this user is exist;

three short beeps indicates a failed operation; four very short beeps indicates low voltage

or full storage.

4. If a code is wrongly input for 3 times, the keypad is shut down for 10s.

5. The lock can store 37 ﬁngerprint users, 78 code users and 30 card users.

6. A user ID is a random 3-digit number(0-9); a user code is a random 8-digi number

(0-9); the user ID of master code is 888; a user without user ID or wrong user ID will

show 999.Other users can not use the two user ID.

7. Don't use corrosive cleaner liquid on lock surface. Clean it with furniture spray wax

in time.

“11111111”

Ensure the ﬁngerprint core is put on the ﬁngerprint scanner

during the enrollment and veriﬁcation.

When placing your ﬁnger on the scanner, make sure the ﬁngerprint

core is directly touching the scanner.

To wash your hands will improve your ﬁngerprint accuracy

on the scanner.

Choose the best ﬁnger when enrolling or verifying your

ﬁngerprint. Clear, clean and without scars.

Essential Series

4 5

1.Insta

llati

1.1 Install the mortise

1.2 Install the front lock body

1.3 Install the back

lock body

1.4 Install batteries

(8X AA Alkaline)

1.5 Install the battery

cover(switch on

“Lock” status)

UNLOC K

LOCK UNLOC KLOCK UNLOCKLOCK

Battery Cover

Card Reading

Area

LCD Screen

Keypad

Fingerprint Sensor

Mortise

Batter Cover Switch

Components

Essential Series

YDME - 90 YDME - 90

Enrolling Fingerprint User at Random(Suitable for Home Use)

Note: You can keep enrolling ﬁngerprints one

after another at this stage.

Ope r at i on Ex a m pl e

Essential Series Essential Series

2.Operation Note

Operation Note:

Press “ ”*0 Press “ ”*0

Press

“#” Press “#”

Change Master Code(or User Code)

Please change the master code before enrolling code user.

Please touch the screen to wake up the lock before operation.

Operation Example

3. Enrolling Fingerprint User

Input “Old Code”

Press “ ”1# Press “ ”1#

Press “ ”# Press “ ”#

Input “Master Code” Input “12345678”

Scanner Light on” Scanner Light on”

Place a Finger on Scanner Place a Finger on Scanner

Place Same Finger on Scanner Place Same Finger on Scanner

(A long Beep Sounds, Success) (A long Beep Sounds, Success)

(Light off, Remove Finger, Light on) (Light off, Remove Finger, Light on)

Input “11111111”

Input “New Code” (twice) Input “12345678” (twice)

Enrolling Fingerprint User with User ID (Recommended for

of convenient for future management )

Ex a m p l e

Op e r a t i o n

(Scanner Light on ）(Scanner Light on ）

Note: 1. You should the same operation once more

to delete the ﬁngerprint thoroughly since the

ﬁngerprint is registered twice.

Press “ ”1# Press “ ”1#

Press “ ”# Press “ ”#

Input “Master Code” Input “12345678”

Input “3- Digit User Id” Input “001”

Place a Finger on Scanner Place a Finger on Scanner

(Light off, Remove Finger, Light on) (Light off, Remove Finger, Light on)

(Place Same Finger on Scanner) (Place Same Finger on Scanner)

(A Long Beep Sounds, Success) (A Long Beep Sounds, Success)

Ex a m pl e

Press 2#“ ”

Op e r a t i o n

4. Deleting Fingerprint User

Deleting with Fingerprint

Press “ ”2#

Input “Master Code” Input “12345678”

Press “ ”# Press “ ”#

Place Finger Place Finger

YDME - 90 YDME - 90

Deleting all Fingerprints

Ex a m p l e

Press “3#” Press “3#”

Press “#”

Press “#” Press “#”

Press “#”

Press “2#”Press “2#”

Input Master Code“ ”

Op e r a t i o n

Deleting with User ID

Essential SeriesEssential Series

Ex a m p l e

Press “ 1* ”

Press 1 *“ ”

Op e r a t i o n

Note:

Input “12345678”

Input “3-Digit User ID (Twice) Input “001” “001”

Input Master Code“ ” Input “12345678”

Input “3-Digit User ID (Twice)

Input “8-Digit User Code (Twice) Input “01230123” (Twice)

Input “001”

Press “#” Press “#”

1. User ID is a random 3-digit number (0-9)

2. A code user ID can be the same as a

ﬁngerprint user ID.

Ex a m p l e

Press “2*” Press “2*”

Op e r a t i o n

6.Deleting Code User

Deleting with U se r ID

Deleting All Code Users

Input Master Code

“ ” Input “12345678”

Input “3-Digit User ID (Twice) Input “001” “001”

Press “#”

Press “3*”

Input Master Code

“ ”

Press “#”

Press “3*”

Input “12345678”

Example

Ex a m p l e

Press “ 5# ”

Press “ 6# ”Press “ 6# ”

Press “ 5# ”

Operation

Op e r a t i o n

7. Enrolling Card User

8. Deleting Card User

Deleting with User ID

Input Master Code

“ ” Input “12345678”

Input “3-Digit User ID

Place a Card on Reading Area Place a Card

Input “001”

Press “#” Press “#”

8 9

YDME - 90 YDME - 90

Deleting All Card Users

9.Unlocking

Unlocking with a Fingerprint

Essential Series Essential Series

Example

Operation

Unlocking with a Card

Unlocking with a Code

Turn the Handle

Unlocking with a Key

Keep pressing the switch

on back side of the handle.

Push the handle

panel to the right.

10 11

Input “Master Code”

Turn the Handle

Press”#”

Press”#” Press”#”

Press”6#” Press”6#”

Press”#”

Input “3-Digit User ID”(Twice)”

Input “12345678”

Input “001”

Input a valid 8-digit code

Swipe a valid card

Front Lock Body

Reset

11.Reset

10.Change Batteries(8 )x1.5V AA Alkaline Batteries

Turn the battery cover switch to “Unlock Status”

Turn the battery cover switch to “Lock Status”

Replace all old batteries with new batter

Remove the battery Cover

Install battery Cover

Connect the power wire on the front lock body with the batteries.

Keep pressing the RESET button on the rear metal plate of the front

lock body with a small stick for several seconds and touch the screen

to wake up the lock. Operation succeeds after hearing a long beep.

Lock will return to factory default status with master code 11111111

and all its memory is cleared.

“ ”

YDME - 90 YDME - 90

Essential Series Essential Series

12.Extension Functions

9V external battery is used in emergency, eg the power failure. Please

connect the 9v external battery electrodes with the electrodes of the lock

for seconds as the picture shows, then you can operate the lock.

12.1 9V External Battery (Available when electrodes exist on the bottom

surface of the front lock body)

12 13

12.3 Audit Trail

Setting Date and Time:

Press: 7 + # + Master Code + “YY/MM/DD/HH/MM”

(twice, 24-hour system) + #

Eg. 2012-6-18, 22:30pm,

Press: 7 + # + 11111111 + “1206182230” “1206182230” + #

Operation

12.2 Enabling/Disabling Passage Mode

Note: Under passage mode, you can unlock it by touching the screen.

Example

Press “**” Press “**”

Press

#“ ” Press

#“ ”

Input “Master Code” Input “12345678”

Check Date and Time:

Press: 7 + # + Master Code + #

Reading Fingerprint Records:

Press: 6 + * + Master Code + #

records will be shown on LCD screen.

Reading Code Records:

Press: 7 + * + Master Code + #

records will be shown on LCD screen.

Reading Card Records:

Press: 8 + * + Master Code + #

records will be shown on LCD screen.

1. 600 recordscan be stored in the lock.

2. After the records are shown on LCD screen,

press “*” means “page up”;

press “#” means “page down”;

press “0” means “back to 1st record”;

press any key to extend display time.

13. Solutions for Common Error

Phenomenon Cause Solution

2.The ﬁngerprint might be deleted

To Enroll the ﬁngerprint again

2.The ﬁngerprint is damaged

1.The ﬁngerprint is pressed

incorrectly

2.Enroll the ﬁngerprint with another

ﬁnger

1.Try to press the ﬁngerprint in correct

location

Four beeps sound when opening the door

Low battery voltage

Change the batteries

No response when pressing the buttons

No battery

Change the batteries

Often fail to verify the ﬁngerprints

1. The ﬁnger is too dirty/dry/wet

.The scanner is too dirty2

1.Clean/ Moisten/ Wipe the ﬁnger

2. Clean the scanner

Fail to enter the enrollment or deletion

mode

1.The code for enrollment or

deletionis not the master code.

2.The operational procedure is

incorrect

1.Conﬁrm that you enroll or delete with

the master code

2.Review the instructions

Place the ﬁnger on the scanner, the red

light is on with three short beeps, and

fail to open the door

Open the door with a valid ﬁngerprint, the

red light is on with three short beeps, and

fail open the door

1.The ﬁngerprint might not be

enrolled

YDME - 90 YDME - 90

Essential Series

14. Template

240.5

165.5

18 42

27.5

212

180.5

Depth95

D:3

24.5

6600-309 Template

( Euro Automatic

Reverse Mortise)

Unit:mm

YDME - 90

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Sargent FM-PE8700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRD216-ZW3 Montageanleitung

Assa Abloy

Assa Abloy ENTR Bedienungsanleitung

Assa Abloy

Assa Abloy ML52RA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT BL7300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy KESO KEK i-turn Bedienerhandbuch

Assa Abloy

Assa Abloy Corbin Russwin SE LP10 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale PAS3621 Bedienungsanleitung

Assa Abloy

Assa Abloy KESO Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT IN120 Wi-Fi Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy CL33700 TCPWI1 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 TCRNE1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT IN120 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT KP8977 Leitfaden

Assa Abloy

Assa Abloy Corbin Russwin TL3700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON M19 Bedienungsanleitung

Assa Abloy

Assa Abloy DC423.2 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin CL3800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Profile G1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy R10 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT Profile Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood Standalone Handbuch

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung