Assa Abloy Sargent PE8500 Series Bedienungsanleitung

1-800-727-5477 • www.sargentlock.com

Installation Instructions

permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

Attention Installer: Improper

installation may result in damage

to the product and void the factory

warranty.

WARNING

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

For Standard, Fire Rated and Aluminium Doors

PE8500 - Standard

12-PE8500 - Fire Rated

AD-PE8500 - Aluminum Door

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

Screw Chart

SCREW

TOTAL QTY

SUPPLIED

WHERE USED

1/4"-20 X 1-1/4" FLAT HEAD

MACHINE SCREW

(2) CHASSIS

OUTER MOUNTING HOLES

(METAL DOOR)

#12 X 1-1/4" FLAT HEAD

WOOD SCREW

(2) CHASSIS

OUTER MOUNTING HOLES

(WOOD DOOR)

#10-24 X 1-1/2" OVAL HEAD

MACHINE SCREW

(2) CHASSIS

INNER MOUNTING HOLES

(METAL DOOR, FIRE RATED)

#10-24 X 3/4" ROUND HEAD

MACHINE SCREW

(2) REAR MOUNTING PLATE

(METAL DOOR)

#10 X 1-1/4" ROUND HEAD

WOOD SCREW

(2) REAR MOUNTING PLATE

(WOOD DOOR)

#10-24 X 3/4" OVAL HEAD

MACHINE SCREW

(2) 657 STRIKE

(METAL FRAME)

#10 X 1-1/4" OVAL HEAD

WOOD SCREW

(2) 657 STRIKE

(WOOD FRAME)

#8-32 X 5/16" W/ #6 OVAL HEAD

MACHINE SCREW

(4) CHASSIS COVER

(2) END CAP

1/4"-20 X 2-3/8" KNURLED FLAT HEAD

MACHINE SCREW

(2) EXIT TRIM

(IF USED)

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

Exploded View

Tools Needed

Chassis

Strike #657

Rail Assembly

Mounting

Plate

Cover

End Cap

DOOR HANDS DETERMINED FROM OUTSIDE OF DOOR

OR SECURED SIDE

Rail Cutting Guide (Provided)

Support Block (Provided)

16- Cylinder Lockdown

(Exploded View For Clarity)

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

Before installation:

1. Install mullion, if used.

2. Fit and hang door.

3. Check the box’s label for the size of the exit device.

4. For wood doors, use wood screws and prep accordingly.

The surface of the door where the exit device is to be applied must be flush. Clear away any

raised projections to allow exit device to rest on the flat surface of the door. If shim kit is

required, contact your distributor.

Note: Please refer to trim and other installation instructions provided in the box.

Strike Mounting Options

650A MULLION WITH 658 FLAT

STRIKE (ALTERNATE STRIKE)

SURFACE

APPLIED 649 STRIKE, 12-PE8500, AD-PE8500,

OPTIONAL STANDARD APPLICATION

INTEGRAL STOP

657 STRIKE

SURFACE APPLIED 657 STRIKE

(STANDARD STRIKE)

BLADE STOP

657 STRIKE

ATTACH WITH SCREWS

PROVIDED. FURNISHED

WITH 650A MULLIONS

ATTACH WITH (2) STRIKE SCREWS

AND USE (2) LOCK WASHERS

BETWEEN FRAME AND STRIKE

DRILL AND COUNTERSINK FOR 1/4"

FLAT HEAD SCREWS

ALUMINUM FRAMES: DRILL (2) 3/8" HOLES FOR

MOLLY-JACK NUTS. REINFORCED METAL FRAMES:

DRILL AND TAP (2) 10-24 HOLES

DRILL (2) 3/8"

HOLES FOR

MOLLY-JACK NUTS

DRILL (2) 3/8"

HOLES FOR

MOLLY-JACK NUTS

L980 MULLION

656 STRIKE

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

Place strike against frame, centered on the line

marked in Step 1. With the strike pressed against the

closed door, trace upper and lower strike slots.

Measure 39-5/8” from the finished floor and mark

door and frame. Temporarily hold strike against

frame. Measure 13/16” from surface of strike (Refer

to the strike template.) for vertical centerline.

Drill and tap #10-24 holes for strike (2 places). Install strike using oval head phillips #10-24 x 3/4”

screws supplied.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

Place supplied paper template against the strike.

Mark hole and mounting holes per device

function.

Using a square, extend centerline marks created

in Step 1.

If there is a trim, the chassis is only held on to the door

by the trim screws. Use the thru holes. See 7a or 7b.

Drill and tap #10-24 thread.

If there isn’t a trim, drill and tap

1/4-20 thread.

Drill and tap #10-24 thread.

If there isn’t a trim, drill and tap

1/4-20 thread.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

7a If you do have a trim: PE8500 / 12-PE8500 - 04, 44, 10, 40 Functions

• Thru-bolt chassis to the trim.

• 04/44 functions: Install cylinder adapter on cylinder before installing cylinder in door. Ensure cylinder

tail piece fully engages spindle hub. Trim excess tail piece.

• 10/40 Functions: Same except, no cylinder.

• DO NOT FULLY TIGHTEN SCREWS.

7b If you do have a trim: PE8500

/ 12-PE8500 13, 15, 43, 73, 74

Functions

• Thru-bolt chassis to trim.

• Ensure spindle engages chassis.

• DO NOT FULLY TIGHTEN SCREWS.

Install chassis mounting screws. DO NOT FULLY

TIGHTEN SCREWS.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

If the rail doesn’t need to be cut, continue to page 10, step 9.

If the rail must be cut, follow these steps on page 8 and 9:

Refer to the individual exit device installation instructions for rail cutting requirements / restrictions.

Instructions will vary based on device type and options.

Do not cut closer than 1-5/8" from

the the front edge of the rail insert.

• Determine cut off dimension “X” by subtracting 2-7/8"

from dimension “Y”. Mark cut off point on mounting

rail. (See below.)

Vertical reference line (C of chassis)

2-7/8"

min.

For doors with stile rail, the stile must overlap by 5/16"min.

A. Ensure there isn’t a gap between the insert

and the dogging slope, and the carrier is

flush with the mount.

B. Mark rail at the required cut length.

Insert

Dogging

slope

Cut line

Mount

Carrier

Information for Cutting Rails

Rail Sizes Door Widths

MinimumStandard

E 32" 24"

F 36" 33"

J 42" 37"

G 48" 43"

Rail cutting guide

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

F. Using a hack saw with a new blade or a chop

saw with a metal cutting blade, cut the rail,

ensuring that the blade stays pressed against

the rail cutting guide.

G. Deburr and smooth all cut edges with a file.

D. Wrap the rail and insert in masking tape, as

shown.

E. Place the rail cutting guide over the masking tape and align it with the cut line. Clamp the cut guide to the rail

using a C-clamp.

C. Ensure plastic insert support is installed under the

cut line.

Cut line

Rail Cutting Guide

Rail cutting guide, continued.

1-800-727-5477 • www.sargentlock.com

the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent

www.assaabloydss.com/patents.

A8302-1 5/23

PE8500 Series - Narrow Rim Exit Devices

Installation Instructions

For Standard, Fire Rated and Aluminium Doors

Depress chassis lift arm, and slide rail assemby

onto chassis.

9 10

Fully tighten chassis screws.

Insert the end cap bracket into the rail assembly.

Ensure rail carrier tabs are aligned with

chassis.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Corbin Russwin CL3300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Arrow Revolution U4A-YRHCPZW0 Technische Daten

Assa Abloy

Assa Abloy KESO KEK i-handle S Bedienerhandbuch

Assa Abloy

Assa Abloy PADDE Series Bedienungsanleitung

Assa Abloy

Assa Abloy MSL mFlipLock standard Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED2400 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Connect 310 Bedienungsanleitung

Assa Abloy

Assa Abloy ePED 1386-00 Bedienungsanleitung

Assa Abloy

Assa Abloy EL580 Bedienungsanleitung

Assa Abloy

Assa Abloy 8654 Bedienungsanleitung

Assa Abloy

Assa Abloy Code Handle Handbuch

Assa Abloy

Assa Abloy Yale Real Living YRDZW Technische Daten

Assa Abloy

Assa Abloy Corbin Russwin ED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Pro SL Technische Daten

Assa Abloy

Assa Abloy Yale YDM3109A Bedienungsanleitung

Assa Abloy

Assa Abloy eCLIQ Bedienungsanleitung

Assa Abloy

Assa Abloy Yale nexTouch Technische Daten

Assa Abloy

Assa Abloy Corbin Russwin HP3000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy EMTEK Tubular Monolithic Entry Set Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 800 9800 TCWI1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC6210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy EL460 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRD226 Technische Daten

Assa Abloy

Assa Abloy CL33700 TCPWI1 Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung