Assa Abloy Yale 8800 Series Bedienungsanleitung

Installation Instructions

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

This product can expose you to

lead which is known to the state

of California to cause cancer and

birth defects or other reproductive

harm. For more information go to

www.P65warnings.ca.gov.

WARNING!

8800 Series Mortise Lock

Used with VN Escutcheon Trim and V Series

Indicators

80-8800-0017-000 12/20

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

8800 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

80-8800-0017-000 12/20

1Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Indicator Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Lock Set Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Rehanding Indicator (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Prepare Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Install Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Install Outside Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Install Inside Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install Outside Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Perform Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Indicator Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

TOC Table of Contents

1 Tools Required

#2 & #3 Phillips

head screwdrivers

Flat blade

screwdriver

1/8" Allen

Wrench 3/32" Drill bit T20 Torx Screw

with Tamper Pin

Driver

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

Installation Instructions

8800 Series Mortise Lock

80-8800-0017-000 12/20

Used with VN Escutcheon Trim and V Series Indicators

2 Indicator Variants

4 Rehanding Indicator (If required)

Depending on function and option ordered,

indicators are provided in the following

variations, these instructions detail how to install

with cylinder, however other variations follow

similar instructions. (Figure 1)

Contact factory for any questions.

Figure 1 Cylinder - For

installation

on inside or

outside of door.

Thumbturn -

For installation

on inside of

door.

Coin Turn - For

installation

on outside of

door.

No input / blank -

For installation on

inside or outside

of door.

3 Lock Set Configuration

To re-hand lock, see instructions on lock body.

Left Hand

Hinges Left

Open Inward

Right Hand

Hinges Right

Open Inward

LHRB

Left Hand

Reverse Bevel

Hinges Left

Open Outward

RHRB

Right Hand

Reverse Bevel

Hinges Right

Open Outward

Figure 2

Verify hand and bevel of door. (Figure 2) Spindle Cam Position for Locks with Deadbolt

(*includes 8864 function)

Outside Indicator Inside Indicator

Door Hand LH/LHRB

Spindle Cam Position for Locks without Deadbolt

(*does not include 8864 function)

Door Hand LH/LHRB

Figure 3

Note:

Stand on outside of locked door when determining door hand.

Next, verify inside and/or outside indicators are handed correctly,

using Spindle Cam Position chart. (Figure 3) If they are handed

correctly, skip to Step 5 “Prepare Door”.

If they are not handed correctly:

1. Remove indicator back plate by pulling out from top slot, then

remove spindle cam from assembly. (Figure 4)

2. Position spindle cam in correct direction for door hand.

(Figure 3)

Important:

• For thumbturn indicators, make sure thumbturn is positioned

in the 12 o’clock direction as shown. (Figure 5)

3. Slide spindle cam post into correct slot of display slide.

(Figure 4)

4. Re-seat back plate into original position.

5. Return indicator to the vacant/unlocked position for

installation.

Thumbturn

Position

Figure 4

Figure 5

Backing

Plate

Spindle cam

Door Hand RH/RHRB

Inside Indicator Outside Indicator

Door Hand RH/RHRB

Outside Indicator Inside Indicator

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

8800 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

80-8800-0017-000 12/20

5 Installation

1Prepare Door

Prepare door for function holes, size, and location

according to 7088-0005 door marker template, if not

already prepped.

Figure 6

Inside of door Outside

of door

RH door

shown

Lock

Screws

2Install Lock

1. Verify strike location according to

template. Clean out door pocket and

door edge of debris.

2. Make sure handing of lock matches

handing of door. Slide lock into door.

(Figure 6)

3. Temporarily hand tighten two (2)

lock screws (#12 x 1-1/4" wood

screws, or #12-24 x1/2" machine

screws).

NOTE: Keep door open until installation is complete.

3Install Outside Trim

Figure 7

1. Verify lock is in unlocked state (square control

hub slot should be oriented as a diamond).

2. Unscrew the inside spindle from the outside lever

assembly 1/2 turn and align the ramp in the hori-

zontal position before inserting into the lock.

3. Slide outside escutcheon assembly on door and

insert outside lever assembly and plastic bushing

into lock body. Lever must be horizontal. (See

Figure 7)

NOTE: If indicator is used on outside, align indicator

spindle with control hub.

Outside Escutcheon

Assembly

Outside Lever

Assembly

Plastic Bushing

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

Installation Instructions

8800 Series Mortise Lock

80-8800-0017-000 12/20

Used with VN Escutcheon Trim and V Series Indicators

5 Installation, continued

4Install Inside Trim

1. Verify lock is in unlocked state

(turn outside lever to ensure).

2. Align inside escutcheon assembly

and install onto inside door face.

(Figure 8)

3. Note: If indicator is used on

inside, align indicator spindle with

control hub.

4. Through-bolt inside escutcheon

to outside escutcheon with two

(2) #8-32 x 2-1/4" screws.

Figure 8

Inside Escutcheon Assembly

#8-32 x 2-1/4" screw

#8-32

x 2-1/4"

screw

Set

screw

Plastic

Bushing

Inside

Lever

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

8800 Series Mortise Lock

Installation Instructions

Used with VN Escutcheon Trim and V Series Indicators

80-8800-0017-000 12/20

5 Installation, continued

7Install Cylinder

Figure 9

Figure 10

Figure 11

1. Thread cylinder into lock until flush with escutch-

eon surface. (Figure 9)

• Pull key slightly out of cylinder to help thread into

lock body.

2. Tighten cylinder clamp screw with #2 Phillips

screwdriver.

• Check operation and adjust if necessary.

Notes:

• Yale logo must be horizontal and on top. (See

Figure 10.)

• If double cylinder function is used, repeat steps 7.1

and 7.2 for second cylinder.

• Interchangeable Core cylinders require a control

key to remove and install the core. This is not pro-

vided standard. It must be requested seperately.

Cylinder

Clamp

Screw

Key and cylinder must be rotated as shown.

8Install Outside Front

1. Tighten the two (2) lock screws completely:

(Figure 11)

2. Attach outside front with two (2) flat head screws

#8-32 x 1/4".

9Perform Functional Check

DO NOT FORCE if resistance is encountered during

functional check. Refer back to Rehanding Indicator (if

required) section to ensure correct handing. Rehand if

necessary.

1. Insert key into cylinder (if present) and rotate:

• Ensure there is no friction against lock case or any

other obstructions.

2. Check key retracts latch:

• Key should rotate freely.

3. Throw deadbolt (if present):

• Check key retracts both deadbolt and latch.

4. Test levers:

• Confirm latch and deadbolt (if installed) retract.

5. Verify indicator displays correct status when

locked and unlocked.

Correct Incorrect

Lock Screw

Outside

Front

#832

x 1/4"

Screws

Lock Screw

without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited

For technical support contact Yale®at 800.438.1951 x5033 or [email protected]

Installation Instructions

8800 Series Mortise Lock

80-8800-0017-000 12/20

Used with VN Escutcheon Trim and V Series Indicators

6 Indicator Parts List

Figure 12

#Description Part # Req.

1 VN Indicator Escutcheon Consult Factory 1

2 Indicator Window 856F049 1

Indicator Display Assembly - Green Unlocked / Red Locked 82-5602-4000

Indicator Display Assembly - Green Vacant / Red Occupied 82-5603-4000

Indicator Display Assembly - Green Unlocked Icon / Red

Locked Icon

82-5604-4000

Indicator Display Assembly - White Unlocked / Red Locked 82-5605-4000

Indicator Display Assembly - White Vacant / Red Occupied 82-5606-4000

Indicator Display Assembly - White Unlocked Icon / Red

Locked Icon

82-5607-4000

Indicator Display Assembly - Green Ouvert / Red Fermé 82-5684-4000

Indicator Display Assembly - Green Libre / Red Occupée 82-5685-4000

4A Indicator Spindle Cam - Thumbturn 50-8800-9328

4B Indicator Spindle Cam - Cylinder/No Input 50-8800-7335*

4C Indicator Spindle Cam - Cylinder Overtravel 50-8800-0378*

4D Indicator Spindle Cam - Thumbturn Overtravel 50-8800-0346

4E Indicator Spindle Cam - Coin Turn 50-8800-7339*

5 Indicator Backing Plate 855F638 1

6 VN Escutcheon Screw Pack (Not shown) 858F517 FIN* 1

7 Field Prep Marker Template (Not shown) 7088-1008 1

*These parts are for 1-3/4" standard thickness doors. For other thicknesses, contact the factory.

NOTE: Reference 8800 Series parts manual for all lock body parts.

80-8800-0017-000 12/20

THE YALE BRAND, with its unparalleled global reach and

range of products, reassures more people in more countries

than any other consumer locking solution.

THE ASSA ABLOY GROUP is the world´s leading

manufacturer and supplier of locking solutions, dedicated to

satisfying end-user needs for security, safety and convenience.

Yale Commercial is a business associated with ASSA ABLOY Access and Egress

Reproduction in whole or in part without the express written permission of

ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

U.S.A.

Yale Locks & Hardware

Address: 225 Episcopal Road

Berlin, CT 060374004

Tel: 18004381951

Fax: 18003380965

yalecommercial.com

Canada:

ASSA ABLOY Door Security Solutions Canada

Address: 160 Four Valley Drive

Vaughan, Ontario L4K 4T9

Tel: 18004613007

Fax: 18004618989

assaabloydss.ca

International:

ASSA ABLOY Americas International

Tel: 19058217775

Fax: 19058211429

assaabloyai.com

Customer Service Phone:

1-800-438-1951

Customer Service Fax:

1-800-338-0965

Technical Product Support:

techsupport.yale@assaabloy.com

Customer Service:

customerservice.yale@assaabloy.com

Website:

Yalecommercial.com

Email for orders:

orders.yaleus@assaabloy.com

Trusted every day

Part of ASSA ABLOY

Inhaltsverzeichnis

Andere Assa Abloy Sperren Handbücher

Assa Abloy

Assa Abloy 8800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy hes 8000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 841C Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 309N Bedienungsanleitung

Assa Abloy

Assa Abloy Yale inTouch Technische Daten

Assa Abloy

Assa Abloy APERIO P100 Handbuch

Assa Abloy

Assa Abloy 813C-50 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1655 Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite DL100 Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 819N Bedienungsanleitung

Assa Abloy

Assa Abloy medeco Aperio M100 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin IN100 Bedienungsanleitung

Assa Abloy

Assa Abloy EMTEK CF Mechanism Bedienungsanleitung

Assa Abloy

Assa Abloy Yale P117 Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 519N Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRC216 Technische Daten

Assa Abloy

Assa Abloy Yale Real Living YRD210-ZW Technische Daten

Assa Abloy

Assa Abloy SECURITRON 32 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron CEPT-10-10 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 7370 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 8200 Bedienungsanleitung

Assa Abloy

Assa Abloy EMTEK EMTouch Classic Style Betriebsanleitung

Assa Abloy

Assa Abloy Sargent SN Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale SIMPLICITY Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung