Associated Electrics RC10B6.2 KIT Bedienungsanleitung

AssociatedElectrics.com

:: Introduction:: Introduction

:: RC10B6.2 KIT Features:: RC10B6.2 KIT Features

:: Additional:: Additional

:: Other Helpful Items:: Other Helpful Items

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and

maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps.

We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations.

New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before

you start to build.

• Lightweight 7075-T6 hard anodized and +3mm increased length

• New symmetric rear arm with improved geometry and stiffness can be flipped to allow a “split” for rear shock mounting position

• Longer rear arm (75mm) improves stability and jump landing

• Outer rear hinge pin captured with bolt head and lock nut for increased durability

• Updated left side rail with motor fan mount (fan not included)

• New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment

• New front wing mount and front wing included

• Bolt-on +1 steering arms for improved steering response

• 69mm CVA bones for reduced bone plunge and minimized friction at drive pin

• New body design with lower center of mass

• Clear body and wing included

• Steel electronics and under servo plates for improved balance and lower overall center of mass

• 5mm aluminum clamping wheel hexes

• Fluid filled gear differential

• 3-gear Lay Down Stealth® transmission for lower and forward CG

• Differential height adjustment with 0, 1, 2, & 3mm insert included

• 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat, and toe adjustments

• Heavy-duty V2 routed graphite front shock tower w/tower guard

• Heavy-duty V2 routed graphite rear tower, STANDARD

• V2 12mm “Big Bore” threaded aluminum shock with x-rings

• Cyanoacrylate glue (CA)(#1597)

• Thread locking compound (#1596)

• Tires and Inserts, Fronts and Rears

• Wheels w/12mm Hex

Front Wheels#9690, #9691

Rear Wheels #9695, #9696

Associated Electrics, Inc.

21062 Bake Parkway.

Lake Forest, CA 92630

http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebook.com/TeamAssociated/

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

Your new B6.2 Team Kit comes unassembled

and requires the following items for completion

(refer to catalog section for suggestions):

• R/C two channel surface frequency radio system

• AA-size batteries for transmitter (#302 alkaline)

• Electronic Speed Control, ESC

(#27002, 27004, 27005, 27006, 27033)

• Steering servo (#27112, 27113, 27114, 27115, 27116)

• R/C electric motor

• Pinion gear (48P), size determined by type/wind of motor

• Battery charger (a peak detection charger, or LiPo compatible charger)

• 2 cell LiPo battery pack (#27318, 27335, 27336, 27337, 27338)

• Polycarbonate specific spray paint

• Silicone Shock Fluid (Refer to catalog for complete listings)

• Body Scissors (AE Part #1737) • FT Body Reamer (#1499) • Shock Pliers (#1675)

• FT Hex/Nut Wrenches (AE Part #1519, 1650) • FT Ballcup Wrench (#1579) • FT Universal Tire Balancer (#1498)

• Green Slime shock lube (AE Part #1105) • FT Dual Turnbuckle Wrench (#1114) • Calipers or a Precision Ruler

• Soldering Iron • Hobby Knife • Wire Cutters

• Needle Nose Pliers

:: Hardware - 1:1 Scale View:: Hardware - 1:1 Scale View

Notes:

2x3mm (91749)

2.5x8mm (31448)

3x8mm (25201)

Aluminum (8553)

Titanium (91592)

3x10mm (25202)

Aluminum (8555)

Titanium (91593)

3x12mm (25203)

Aluminum (8556)

Titanium (91594)

3x14mm (89208)

Aluminum (8567)

Titanium (91595)

3x16mm (25204)

Titanium (91596)

3x18mm (89209)

Titanium (91597)

Flat Head (fhcs)

2x4mm (31510)

Aluminum (8545)

2.5x6mm (31520)

2.5x8mm (31521)

2.5x10mm (31522)

3x4mm (91158)

3x5mm (31530)

3x6mm (31531)

Titanium (91580)

3x8mm (31532)

Aluminum (8552)

Titanium (91581)

3x10mm (25211)

Aluminum (8554)

Titanium (91582)

3x12mm (89202)

Titanium (91583)

3x14mm (25187)

Titanium (91584)

3x16mm (89203)

Titanium (91585)

3x18mm (2308)

3x20mm (25188)

Titanium (91587)

3x22mm (25189)

Titanium (91588)

3x24mm (89204)

Titanium (91589)

3x30mm (91478)

Button Head (bhcs) Ball Bearings

3x7x3mm (91475)

5x8x2.5mm (31400)

5x10x4mm (91560)

6x13x5 (91562)

10x15x4 (91563)

3x2.5mm (31500)

3x3mm (25225)

3x10mm (4671)

Set Screws

5.5x0.5mm (31381)

5.5x1.0mm (31382)

5.5x2.0mm (31383)

2.6x6mm Washer (89278)

3x8mm Washer (89218)

Shims and Washers

5/64 Diff Thrust Balls (6574)

3/32 Carbide Diff Balls (6581)

3/32 Ceramic Diff Balls (6584)

Diff Balls

M3 Plain Nut (91477)

M3 Alum. Locknut, Blue (31550)

M3 Locknut, Black (25215

M3 Locknut w/Flange (25612)

FT 3mm Locknuts, Blue(25392)

M4 Nuts:

Serrated Steel (Silver)(91826)

Flanged (Black) (91148)

FT Alum. Locknut (Blue) (25391)

Serrated Steel (Black) (91738)

Nuts (lock/plain)

Socket Head (shcs)

1.6 x 5mm (91611)

Ballstuds

Silver 5mm long (31283)

Silver 8mm long (31284)

HD 6mm (91047)

Ti Nitride HD 6mm (91118)

Ti HD 6mm (91751)

HD 8mm (91048)

Ti HD 8mm (91752)

HD 10mm (91049)

Ti HD 10mm (91753)

:: Table of Contents:: Table of Contents

:: Notes:: Notes

This symbol indicates a special

note or instruction in the manual.

This symbol indicates a Racers Tip.

1................... Cover

2................... Introduction

3...................1:1 Hardware “Fold Out”

4................... Table of Contents

5....................Bag 1

6 - 8..............Bag 2

8 - 9..............Bag 3

9 - 10...........Bag 4

10 - 11.........Bag 5

11 - 13........Bag 6

13 - 14........Bag 7

14 - 15........Bag 8

15 - 17........ Bag 9

17 - 19........Bag 10

20 - 22.......Tuning Tips

23 - 31....... Catalog

31................ Contact Info

32................Setup Sheet “Kit Setup”

33................Setup Sheet “Blank”

34................Back Cover

!There is a 1:1 hardware foldout page in the

front of the manual. To check the size of a part,

line up your hardware with the correct drawing

until you find the exact size. Each part in the

foldout has a number assigned to it for ordering

replacement parts.

Associated Electrics, Inc.

21062 Bake Parkway.

Lake Forest, CA 92630

http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebook.com/TeamAssociated/

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

:::: Bag 1Bag 1 -- StepStep 22

:::: BagBag 11-- StepStep 33

:::: Bag 1 -Bag 1 - Step 1Step 1

1/20

91667

Steering

Bellcrank

Brace

x2x2

25188

M3 x 20mm

BHCS

Do not overtighten steering bolts. Make sure

there is free movement in the steering rack.

91475

3 x 7 x 3

Ball Bearing

91475

3 x 7 x 3

Ball Bearing

91667

Steering

Rack

91667

Steering

Bellcrank

(Right)

Front

91667

Steering

Bellcrank

(Left)

x4x4

x2x2 x2x2

91048

Heavy-duty

Ballstud,

8mm

31382

FT Ballstud

Washer,

Aluminum

(1mm)

x2x2

89202

M3 x 12mm

BHCS

31283

5mm Ball

Stud, Long

Note orientation

of steering rack.

The steering

bellcrank brace

has offsets on one

side. They should be

installed towards

the bearings.

!x2x2

x2x2

91049

Heavy-duty

Ballstud,

10mm

31382

FT Ballstud

Washer,

Aluminum

(1mm) 91766

Front

Ball Stud

Mount

TOP

25225

M3 x 3mm

Set Screw

91821

Anti-Roll

Bar Collar

91822

Anti-Roll Bar,

Blue (1.0mm)

Do not overtighten

#25225 - M3 x 3mm set screw.

You could bend the bar!

31520

M2.5 x 6mm

BHCS

x2x2

:::: Bag 2Bag 2 --Step 1Step 1

:::: Bag 2Bag 2 --Step 3Step 3

:::: Bag 2Bag 2 --Step 2Step 2

4671

M3x10mm

Set Screw

91820

Steering

Link, B6.1

31382

FT Ballstud

Washer, aluminum

(1mm)

Tighten the

steering link ball

cups all the way

until snug.

x2x2

91728

Servo Horn

Ring

31284

8mm Ball

Stud, Long

91728

Servo

Horn

Servo not

included!

31532

M3 x 8mm

BHCS

x4x4

x6x6 x5x5

25202

M3 x 10mm

FHCS

91749

M2 x 3mm

FHCS

91652

Side Rails

(L & R)

91747

B6 FT Steel

Chassis Weight,

24g

91748

B6 FT Steel

Chassis Weight,

36g

25201

M3 x 8mm

FHCS

91734

Battery

Foam, B6

#91734 - Side Rail Foams

Have two thickness

options to accomodate

any battery size.

x2x2

25204

M3 x 16mm

FHCS

91656

Bulkhead

91850

Chassis,

B6.2 There are two bulkhead settings

(25 °, 30 °). 25 °is the standard used.

The arrow should point

forward for the desired setting.

:::: Bag 2 -Bag 2 - Step 6Step 6

:::: Bag 2Bag 2 --Step 5Step 5

:::: Bag 2Bag 2 --Step 4Step 4

The front hinge pin

brace has a sharp

edged side, and a

rounded edge side.

Mount the sharp

edge side towards

the bulkhead.

#91728 - Servo Spacers

are not required for all servos.

Align the servo

horn 90 degrees

89218

M3 x 8mm

Washer

91719

Servo

Mount

91728

Servo

Spacers

31532

M3 x 8mm

BHCS

x4x4

x2x2

x4x4

25211

M3 x 10mm

BHCS

x2x2 91766

Top Plate,

25187

M3 x 14mm

BHCS

x2x2

25225

M3 x 3mm

Set Screw

31510

M2 x 4mm

BHCS

91820

Front Anti-

Roll Bar Link

91821

Anti-Roll

Bar Pivot

91673

Front Arms,

Gull-Wing, B6

91657

Front Hinge

Pin Brace,

x2x2

25211

M3 x 10mm

BHCS

x2x2

bar flush

with pivot

:::: Bag 3 - Step 1Bag 3 - Step 1

:::: Bag 2 - Step 8Bag 2 - Step 8

:::: Bag 2 -Bag 2 - Step 7Step 7

Build 2 (1 left, 1 right)

x2x2

31531

M3 x 6mm

BHCS

91560

5 x 10 x 4

Bearing

91682

Front Axle

91776

Steering

Block

(4mm)

#1596

thread lock

25188

M3 x 20mm

BHCS

91815

Shock

Bushing,

10mm

91768

Front Shock

Tower,

Gull-Wing

91771

Front Shock

Tower Cover,

Gull-Wing

x2x2

There are two sets of steering

blocks included with your kit, a 3mm

and a 4mm. The 4mm steering

blocks are used for the kit setup.

Use the outer most hole on

the shock tower for kit setup

Bearing

There are two sets of steering

blocks included with your kit, a 3mm

and a 4mm. The 4mm steering

25215

M3 Locknut,

black

91680

Steering

Block Arm,

+1mm

91047

Heavy-duty

Ballstud,

6mm

25202

M3 x 10mm

FHCS

89208

M3 x 14mm

FHCS

91865

Wing Mount,

Front

x2x2

91670

Front Hinge Pin

(Inner, 3x34mm)

25225

M3 x 3mm

Set Screw

x2x2

x2x2 25204

M3 x 16mm

FHCS

91685

Front

Bumper

x2x2

#91865 - Front Wing Mount is used as a tuning option to

increase front end stabillity by adding a front wing (included).

If you do not use #91865, use #25202

M3x10mm FHCS instead of #89208 M3x14mm FHCS.

:::: Bag 4 - Step 1Bag 4 - Step 1

:::: BagBag 3 - Step 33 - Step 3

:::: Bag 3 - Step 2Bag 3 - Step 2

Build 2 (1 left, 1 right)

Build 2 (1 left, 1 right) Build 2 (1 left, 1 right)

91049

Heavy-duty

Ballstud,

10mm

25215

M3 Locknut,

black

91776

Caster

Block Insert

(+5°)

There are three caster

block inserts included

(0°, +/- 2.5 °, +/- 5 °).

+5 ° is the standard

insert used.

Tab up =positive caster

Tab down =negative caster

91776

Caster

Block

You can install an

optional #31520 screw

to use as a steering

stop setting.

You can install an

optional #4670 set

screw to better hold

the caster block inserts

and hinge pin.

Total

Caster

25°25°30°20°2 7. 5 °22.5°

0 2.5 up 5 up2.5 down 5 down

30°30°35°25°32.5°2 7. 5 °

Bulkhead

Orientation

Caster Block Insert

optional #31520 screw

31532

M3 x 8mm

BHCS

x2x2

#91670 - Hinge Pin will be

tight in the caster blocks,

but should rotate freely

in the front arms.

31510

M2 x 4mm

BHCS

91776

Caster Block

Spacer

91670

Front Hinge Pin

(Outer, 3x26mm)

x2x2

25187

M3 x 14mm

BHCS 91676

Caster Hat

Bushing

Top: 0mm

Bottom: 3mm

x2x2

91772

Aluminum

Arm Mount,

92014

Arm Mount

Inserts

(1°)

x2x2

31541

M3 x 6mm

FHCS

x2x2

See next step for

pill chart tips

See next step for

pill chart tips

91685

Rear

Bumper

91688

Aluminum

Arm Mount, D

91670

Rear Hinge Pin

(Inner, 3.5x48mm)

91855

B6.2 Rear

Arms, 75mm

92014

Arm Mount

Inserts

(1°)

91855

Rear Arm

Sapcer

x2x2

In 1°

Out 1°

:::: Bag 5 - Step 2Bag 5 - Step 2

:::: Bag 5 - Step 1Bag 5 - Step 1

:::: Bag 4 - Step 2Bag 4 - Step 2

91780

Gear Diff

washer

5x15mm

91782

Gear Diff

O-Ring

91785

Gear Diff

Outdrive

91783

Gear Diff

Gear 91785

Gear Diff

Outdrive

91780

Gear Diff

Sun Gear

#6588

black grease

One pocket is flat for inserting the

#91785 gear diff outdrive pin.

x4x4

91780

Gear Diff

washer

5x15mm

91782

Gear Diff

O-Ring

91782

Gear Diff

O-Ring

3.3 x 0.6mm

91780

Planet Gear

Diff Shim

3.5 x 9mm

91780

Planet

Gear

91785

Gear Diff

Outdrive

91783

Gear Diff

Crosspin

91783

Gear Diff

Cover

#6588

black grease

#6588

black grease

#6588

black grease

#91782 3.3x0.6mm Gear Diff

O-Rings are a tuning option.

Kit setup is built without O-Rings

Anti-SquatToe-In

1°

Kit Setup

1°

Kit Setup

The (#91772) C and (#91688) D aluminum arm

mounts allow for a large amount of setup

combinations when using the (#92014) 0.5°

and 1°arm mount inserts.

For a complete list of pill setup combinations, please

visit our website by using the link or QR code below.

https://www.teamassociated.com/pdf/cars_and_

trucks/RC10B6/B6_B6D_Pill-Chart.pdf

D Plate

In 1°

C Plate

Out 1°

Inhaltsverzeichnis

Andere Associated Electrics Motorisiertes Spielzeugauto Handbücher

Associated Electrics

Associated Electrics WeareAE CHAMPIONS BY DESIGN DATSUN APEX2... Bedienungsanleitung

Associated Electrics

Associated Electrics TC3 Bedienungsanleitung

Associated Electrics

Associated Electrics RC12 L3 Bedienungsanleitung

Associated Electrics

Associated Electrics SC10 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10 Worlds Car Kit Bedienungsanleitung

Associated Electrics

Associated Electrics T4.1 Bedienungsanleitung

Associated Electrics

Associated Electrics Team Associated RC10 DS DUAL SPORT Bedienungsanleitung

Associated Electrics

Associated Electrics RC8 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10 SC64 TEAM KIT Bedienungsanleitung

Associated Electrics

Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung

Associated Electrics

Associated Electrics RC8T4 Team Kit Bedienungsanleitung

Associated Electrics

Associated Electrics R12E Bedienungsanleitung

Associated Electrics

Associated Electrics RC10F6 Bedienungsanleitung

Associated Electrics

Associated Electrics RC10B2 9000 Bedienungsanleitung

Associated Electrics

Associated Electrics RC8B3.2e Bedienungsanleitung

Associated Electrics

Associated Electrics RC18T Bedienungsanleitung

Associated Electrics

Associated Electrics RC10T4 Bedienungsanleitung

Associated Electrics

Associated Electrics RC12LW Bedienungsanleitung

Associated Electrics

Associated Electrics RC10B3 Bedienungsanleitung

Associated Electrics

Associated Electrics RC19T Bedienungsanleitung

Associated Electrics

Associated Electrics RC10B5M Factory Lite Team Kit Bedienungsanleitung

Associated Electrics

Associated Electrics TEAM ASSOCIATED RC10B4 Bedienungsanleitung

Associated Electrics

Associated Electrics REEDY POWER RC10 T6.4 TEAM KIT Bedienungsanleitung

Associated Electrics

Associated Electrics Qualifier Series Bedienungsanleitung

Beliebte Motorisiertes Spielzeugauto Handbücher anderer Marken

Eduard

Eduard Humber Scout Car Mk.I exterior Bedienungsanleitung

Traxxas

Traxxas 4995X Bedienungsanleitung

Jamara

Jamara VW T1 Bus Bedienungsanleitung

REVELL

REVELL 68 CHEVY CHEVELLE SS 396 Bedienungsanleitung

Schumacher

Schumacher Pro Cat Bedienungsanleitung

Tamiya

Tamiya TT-01 TYPE E Bedienungsanleitung

Eduard

Eduard Krupp Protze 6x4 1/48 Bedienungsanleitung

New Bright

New Bright 61072UEP Bedienungsanleitung

Team Durango

Team Durango DEX410v5 Bedienungsanleitung

Jamara

Jamara Mercedes Actros Muldenkipper 2,4 GHz Bedienungsanleitung

PLAYMOBIL

PLAYMOBIL 9536 Bedienungsanleitung

Atomic

Atomic BZ3 Bedienungsanleitung

Aiyaplay

Aiyaplay 370-290V00 Bedienungsanleitung

Power Wheels

Power Wheels GRJ53 Bedienungsanleitung

ZEROTRIBE

ZEROTRIBE Zetricks ZT1144 Bedienungsanleitung

INJUSA

INJUSA 412 Bedienungsanleitung

Maverick

Maverick MSC-30BR-WP Bedienungsanleitung

Land of B.

Land of B. Rollin' Riders Bedienungsanleitung